• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.19-24
• /
• 2006

Wireless sensor networks(WSN) technology has various applications such as surveillance and information gathering in the uncontrollable area of human. One of major issues in WSN is the research for reducing the energy consumption and reliability of data. A system with forward error correction(FEC) can provide an objective reliability while using less transmission power than a system without FEC. In this paper, we propose to use LDPC codes of various code rate(0.53, 0.81, 0.91) for FEC for WSN. Also, we considered node-to-node interference in addition to AWGN channel. The proposed system has not only high reliable data transmission at low SNR, but also reduced transmission power usage.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.635-642
• /
• 2012

The Packet radio C2OTM(Command and Control On The Move) for Command, Control and situational awareness in communication environment of current Combat Net Radio Network is required in a relay transmission techniques. This is to assure the reliability of information transfer, and extend Wireless Coverage and overcome Communication obstacles of mountainous terrain. For the reliability of information transmission in tactical environment, Ad hoc Networking is necessary considering communication environment and an appropriate application of error correction. In this study, We propose a on-demand SDR algorithm that is currently being applied the FEC, Golay, Repetition Code. This enhanced relay transfer uses Ack Reply in tactical operating environment of MIL-STD-188-220 Protocol.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.595-605
• /
• 2015

This paper proposes a robust, imperceptible block-based digital video watermarking algorithm that makes use of the Speeded Up Robust Feature (SURF) technique. The SURF technique is used to extract the most important features of a video. A discrete multiwavelet transform (DMWT) domain in conjunction with a discrete cosine transform is used for embedding a watermark into feature blocks. The watermark used is a binary image. The proposed algorithm is further improved for robustness by an error-correction code to protect the watermark against bit errors. The same watermark is embedded temporally for every set of frames of an input video to improve the decoded watermark correlation. Extensive experimental results demonstrate that the proposed DMWT domain video watermarking using SURF features is robust against common image processing attacks, motion JPEG2000 compression, frame averaging, and frame swapping attacks. The quality of a watermarked video under the proposed algorithm is high, demonstrating the imperceptibility of an embedded watermark.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.81-88
• /
• 2004

Turbo code has been adopted in the 3GPP standard, since its performance is very close to the Shannon limit. However, the turbo decoder requires a lot of computations and the amount of the memory increases as the block size of turbo codes becomes larger. In order to reduce the complexity of the turbo decoder, the Log-MAP, the Max-Log-MAP and the sliding window algorithm have been proposed. In this paper, the performance of turbo codes adopted in the 3GPP standard is analyzed by using the floating point and the fixed point implementation. The efficient decoding method is also proposed. It is shown that the BER performance of the proposed method is close to that of the Log-MAP algorithm.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.845-850
• /
• 2010

In this paper, a method for transmitting layered SVC streams in differentiated MBSFN channels is presented. Scalable coded video streams are transmitted in modulation channels of different efficiency that it achieves reduced resource consumption compared to non-scalable AVC stream. When utilizing with Raptor FEC, the combined effect is enhanced service coverage with providing minimum video quality at the edge of the service area, than the case of AVC.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.11-18
• /
• 2022

A physically unclonable function (PUF) is a circuit that generates random numbers by exploiting natural variation. Since it utilizes variations, which cannot be fully controlled, it can be used to generate true random numbers, but environment change may distort the output. In this paper, we propose a PUF with a confidence signal. We designed a PUF that exploits the difference of the time constant of the circuit and verified that different PUFs generate distinct outputs and the same PUF keeps generating similar outputs regardless of the temperature change. Compared to the existing technique, which employs an error correction code, the proposed technique offers the same level of reliability at the 700 times smaller overhead.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4382-4394
• /
• 2023

Passive auto-catalytic recombiners (PARs) are widely used to mitigate a hydrogen hazard. The first step to evaluate the hydrogen safety by PARs is to obtain qualified test data of the PARs for validation of their analytical model. SPARC PAR tests SP8 and SP9 were conducted to evaluate the hydrogen recombination characteristics of a honeycomb-shaped catalyst PAR. To obtain the hydrogen recombination rate from the PAR test data, two methods, Method-1 and Method-2, introduced by the THAI project, were applied. Since a large gradient of hydrogen concentration developed during hydrogen injection can cause a large error in the hydrogen mass obtained by integrating the measured hydrogen concentrations, a gate was installed at the PAR inlet to homogenize hydrogen in the test vessel before the PAR operation in the tests. A computational fluid dynamics (CFD) code with a PAR model was also applied to evaluate the characteristics of the PAR recombination according to the PAR inlet conditions, and the results were compared with those from Method-1 and Method-2. It was confirmed that the recombination rates from Method-1 require a correction factor to be compatible with results from Method-2 and the CFD simulation in the case of the SPARC-PAR tests.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.66-74
• /
• 2010

Recently distributed video coding (DVC) is spotlighted for the environment which has restriction in computing resource at encoder. Wyner-Ziv (WZ) coding is a representative scheme of DVC. The WZ encoder independently encodes key frame and WZ frame respectively by conventional intra coding and channel code. WZ decoder generates side information from reconstructed two key frames (t-1, t+1) based on temporal correlation. The side information is regarded as a noisy version of original WZ frame. Virtual channel noise can be removed by channel decoding process. So the performance of WZ coding greatly depends on the performance of channel code. Among existing channel codes, Turbo code and LDPC code have the most powerful error correction capability. These channel codes use stochastically iterative decoding process. However the iterative decoding process is quite time-consuming, so complexity of WZ decoder is considerably increased. Analysis of the complexity of LPDCA with real video data shows that the portion of complexity of LDPCA decoding is higher than 60% in total WZ decoding complexity. Using the HDA (Hard Decision Aided) method proposed in channel code area, channel decoding complexity can be much reduced. But considerable RD performance loss is possible according to different thresholds and its proper value is different for each sequence. In this paper, we propose an adaptive HDA method which sets up a proper threshold according to sequence. The proposed method shows about 62% and 32% of time saving, respectively in LDPCA and WZ decoding process, while RD performance is not that decreased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.436-444
• /
• 2005

Unitary matrix modulation (UMM) is investigated in multiple antennas system that is called unitary space-time modulation (USTM). In an OFDM, the diagonal components of UMM with splitting over the coherence bandwidth (UMM-S/OFDM) have been proposed. Recently LDPC code is strongly attended and studied due to simple decoding property with good error correction property. In this paper, we propose LDPC coded UMM-S/OFDM for increasing the system performance. Our proposed system can obtain frequency diversity using UMM-S/OFDM like USTM/OFDM, and large coding gain using LDPC code. The superior characteristics of the proposed UMM-S/OFDM are demonstrated by extensive computer simulations in multi-path Rayleigh fading channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2465-2473
• /
• 2011

This paper describes a circuit-level optimization of DFU(decoding function unit) for LDPC decoder which is used in wireless communication systems including WiMAX and WLAN. A new design of DFU based on sign-magnitude arithmetic instead of two's complement arithmetic is proposed, resulting in 18% reduction of gate count for 96 DFUs array used in mobile WiMAX LDPC decoder. A multi-mode LDPC decoder for mobile WiMAX standard is designed using the proposed DFU. The LDPC decoder synthesized using a 0.18-${\mu}m$ CMOS cell library with 50 MHz clock has 268,870 gates and 71,424 bits RAM, and it is verified by FPGA implementation.