• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.51-55
• /
• 2006

Digital satellite communication systems are usually integrated with terrestrial systems to provide various services. In these cases, they should satisfy the performance objectives defined by the terrestrial systems. Recommendation ITU-R S.1062 specifies the error performance objectives of digital satellite communication systems operating below 15 GHz. The error performance are given in terms of bit error probability divided by the number of the average bit errors in the burst ($\alpha$). This paper presents a theoretical method to estimate $\alpha$ that is a very important parameter in the satellite communication systems to analyze the error performance objectives. We show performance estimation result of DVB-RCS turbo code using the presented method, and verify them by comparing to the simulation results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.118-124
• /
• 2008

For forward error correction, DVB-S2, which is the digital video broadcasting forward error coding and modulation standard for satellite television, uses a system based the concatenation of BCH with LDPC inner coding. In DVB-S2 the LDPC codes are defined for 11 different code rates, which means that a DVB-S2 LDPC decoder should support multiple code rates. Seven of the 11 code rates, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10, are regular and the rest four code rates, 1/4, 1/3, 2/5, and 1/2, are irregular. In this paper we propose a flexible decoder for the regular LDPC codes. We combined the partially parallel decoding architecture that has the advantages in the chip size, the memory efficiency, and the processing rate with Benes network to implement a DVB-S2 LDPC decoder that can support multiple code rates with a block size of 64,800 and can configure the interconnection between the variable nodes and the check nodes according to the parity-check matrix. The proposed decoder runs correctly at the frequency of 200MHz enabling 193.2Mbps decoding throughput. The area of the proposed decoder is $16.261m^2$ and the power dissipation is 198mW at a power supply voltage of 1.5V.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.494-501
• /
• 2013

The convolution code(CC) of code rate 1/2 as a forward error correction (FEC) in Quadrature Phase Shift Keying (QPSK) is applied to decrease bit error rate (BER) by background noise and multipath in shallow water acoustic channel. Ratio of transmitting signal bandwidth to channel coherence bandwidth is defined as frequency selectivity index. BER and bit energy-to-noise ratio gain of transmitted signal according to frequency selectivity index are evaluated. In the results of indoor water tank experiment, BER is well matched theoretical results at frequency selectivity index less than about 1.0. And bit energy-to-noise ratio gain is also matched theoretical value of 5 dB. BER is effectively decreased at frequency selective multipath channel with frequency selectivity index higher than 1.0. But bit energy-to-noise ratio greater than a certain size in terms of CC weaving is effective in reducing bit errors. In the results, the defined frequency selectivity index in this study could be applied to evaluate a performance of CC in multipath channel. Also it could effectively reduced BER in a low speed underwater acoustic communication system without an equalizer.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.179-186
• /
• 2009

This paper describes the design and implementation for spread spectrum FTS encoder and decoder. The FTS command format is defined by 64 bit encrypted packet that contains all required information relayed between the ground and the vehicle. Encryption is accomplished using the Tripple-DES encryption algorithm in block encryption form. The proposed FTS encoder and decoder is using the Convolution Encoding and Viterbi Decoding for forward error correction. The Spread Spectrum Modulation is done using a PN code, which is 256 bit gold code. The simulation result shows that the designed FTS decoder is compatible with the designed FTS encoder.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.25-34
• /
• 2012

This paper presents a universal architecture for variable-length eight-parallel Reed-Solomon (RS) decoder for high-rate WPAN systems. The proposed architecture can support not only RS(255,239) code but various shortened RS codes. Moreover, variable-length architecture provides variable low latency for various shortened RS codes and the eight-parallel design also provides high data processing rate. Using 90-$nm$ CMOS standard cell technology, the proposed RS decoder has been synthesized and measured for performance. The proposed RS decoder can provide a maximum 19-$Gbps$ data rate at clock frequency 300 $MHz$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.277-284
• /
• 2001

Viterbi algorithm is widely used in digital communication system for FEC(forward error correction). Each communication systems based on the Viterbi algorithm use specific Viterbi decoder which has different code parameter values. Even if Viterbi decoder has the same code parameters, it can be varied by the design architecture adopted. We propose the parameterized VHDL model generator for the efficiency of the design. It makes it possible to achieve shorter design time and lower design cost. The model generator searches the design space available and finds out the optimal design point to generate a decoder model.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.417-421
• /
• 2005

In the recent digital communication systems, the performance of Turbo Code using the error correction coding depends on the interleaver influencing the free distance determination and the recursive decoding algorithms that is executed in the turbo decoder. However, performance depends on the interleaver depth that needs many delays over the reception process. Moreover, turbo code has been known as the robust coding methods with the confidence over the fading channel. International Telecommunication Union(ITU) has recently adopted it as the standardization of the channel coding over the third generation mobile communications(IMT-2000). Therefore, in this paper, we proposed the interleaver that has the better performance than existing block interleaver, and modified turbo decoder that has the parallel concatenated structure using MAP algorithm. In the real-time voice and video service over third generation mobile communications, the performance of the proposed two methods was analyzed and compared with the existing methods by computer simulation in terms of reduced decoding delay using the variable decoding method over AWGN and fading channels for CDMA environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.415-418
• /
• 2011

This paper describes a circuit-level optimization of DFU(decoding function unit) for LDPC decoder which is used in wireless communication systems such as WiMAX and WLAN. The conventional DFU which is based on min-sum decoding algorithm needs conversions between two's complement values and sign-magnitude values, resulting in complex hardware. In this paper, a new design of DFU that is based on sign-magnitude arithmetic is proposed to achieve a simplified circuit and high-speed operation.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.267-275
• /
• 2018

The reference stations in a satellite-based augmentation system (SBAS) collect raw data from global navigation satellite system (GNSS) to generate correction and integrity information. The multipath signals degrade GNSS raw data quality and have adverse effects on the SBAS performance. The currently operating SBASs (WAAS and EGNOS, etc.) survey existing commercial equipment to perform multipath assessment around the antennas. For the multi-path assessment, signal power of GNSS and multipath at the MEDLL receiver of NovAtel were estimated and the results were replicated by a ratio of signal power estimated at NovAtel Multipath Assessment Tool (MAT). However, the same experiment environment used in existing systems cannot be configured in reference stations in Korean augmentation satellite system (KASS) due to the discontinued model of MAT and MEDLL receivers used in the existing systems. This paper proposes a test environment for multipath assessment around the antennas in KASS Multipath Assessment Tool (K-MAT) for multipath assessment. K-MAT estimates a multipath error contained in the code pseudorange using linear combination between the measurements and replicates the results through polar plot and histogram for multipath assessment using the estimated values.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.681-684
• /
• 2011

최근 IEEE 802.11 WLAN(Wireless Local Area Network)에서 실시간 멀티미디어 서비스가 증가하고 있다. WLAN 의 패킷 전송방식은 Unicast 또는 Broadcast 방식이 있다. Unicast 방식은 재전송을 포함하여 유실율이 적으나 사용자가 증가할수록 AP 에서 필요한 무선 자원의 크기가 증가한다. 무선 자원의 크기가 증가하면 AP 부하가 증가하여 서비스 수용에 한계가 있다. Broadcast 방식은 사용자 수에 상관 없이 무선 자원의 크기가 일정하나, 패킷 유실율이 높다. 본 논문에서는 이러한 문제점을 해결하기 위해 Broadcast 와 FEC(Forward Error Correction) Erasure Code 기반 기술을 적용하는 것을 제안한다. 방송 패킷을 이용 AP 의 부하를 줄이고, Reed Solomon Erasure Code 를 적용하여 패킷 유실 복구율을 높인다. 이러한 방법을 통하여 다수의 사용자에게 안정적인 실시간 멀티미디어 방송 서비스를 제공 할 수 있다. 제안한 방법을 검증하기 위해 Android Platform 에서 FEC 적용 유무에 따른 수신율을 측정하였다. 그 결과 유실율 30%미만인 Broadcast 환경에서 96.4% 이상의 수신율을 보였다.