• 조명전기설비학회논문지
• /
• 제27권11호
• /
• pp.1-6
• /
• 2013

It is introduced the phase error sources of a incoherent hologram in incoherent triangular holography and derived the reconstruction image of point-source including the phase error in the lateral direction. From the reconstruction image of point-source, we analyzed the effect of phase error on the lateral resolution. When the phase retardation errors and azimuth angle error of a wave plate and a polarizer range from 0 to $2{\pi}/15$, the normalized intensities of reconstructed images are down by about 0.1% and 2.3%, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.389-394
• /
• 1991

The surface-to-air missile system using Command to Line-Of-Sight (CLOS) guidance law is represented by complex nonlinear differential equations with 6 degree-of-freedom. This paper presents the characterictics of missile system and the effect of various error sources by Monte-Carlo simulation method. By simulation the part of playing a main role in the surface-to-air missile system is radar. Therefore for the performance of missile system the development of the technique reducing the error of radar is required. And the effect of accelerometer error is a few large, too. But, because accelerometer costs cheap this problem is solved easily. And the main error source of missile system data is the thrust, which affects directly to acceleration. The result is the important information about designing and fabricating missile system. And this makes the missile system best because of sharing elaborate and expense effectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.479-482
• /
• 2001

An error analysis is very important for a precision machine to estimate its performances. This study proposes a new parallel device. cubic parallel manipulator. There are so many error sources in this mechanism. Errors of the proposed cubic parallel vary with the stiffness of the manipulator. The stiffness of each leg depends on the direction of the actuation force and its direction. In this paper, the stiffness of the manipulator is calculated and the position errors and the orientation errors are predicted with the platform moving. The analysis shows that the method can be used in predicting the accuracy of other parallel devices and in designing a parallel manipulator.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1352-1357
• /
• 2004

Thermal error compensation has been developed for CNC (Computer Numerical Control) machining center with moving heat sources. The thermal error in CNC machining center has an effect on machining accuracy more than the geometric error does. Thus, temperature distributions of a spindle unit have been analyzed numerically by a Finite Differential Method and experimentally by an infrared (IR) camera in this study. A multiple variable method has been derived to estimate the thermal deformation of the machine origin stably and effectively after measuring deformation and temperature data. The experimental results for a vertical machining center have shown that the thermal errors of the machine origins were reduced more than 30% by the developed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.58-58
• /
• 2001

This paper shows a practical approach that is robust to the errors causing path-delay in mobile wireless location, and analyzes its performance by comparing with other methods. NLOS(non-line-of-sight) error and multipath are two big sources of positioning error in wireless location. Contrary to GPS(global positioning system), they result from the terrestrial propagation of a signal. Especially, since LOS(line-of-sight) path between a transceiver and a receiver is blocked by intermediate buildings and topography, NLOS causes a signal to be reflected and diffracted. This path-delay error is very localized, and so, it is not easy to be estimated and mitigated. To treat such localized error, therefore ...

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.507-512
• /
• 2016

본 연구는 유아 자기통제력 평가도구의 신뢰도와 오차에 대한 분석을 통해 유아 자기통제력 평가도구뿐만 아니라 유아를 대상으로 한 평가도구를 활용할 때 적용할 수 있는 유용한 정보를 제공하고자 하는 목적으로 수행되었다. 본 연구의 연구대상은 만5세 16학급 259명의 담임교사 16명과 어머니가 유아의 자기통제력을 평가한 자료이다. Kendall과 Wilcox[1]가 개발한 자기통제력 평가도구 검사 결과를 활용하여 평가자, 평가문항, 평가대상 유아, 검사도구 그리고 각 요인간의 상호작용에 대한 분산분석을 실시하였으며 각각의 분산추정치에 대한 분석을 수행하였다. 본 연구를 통하여 유아 자기통제력 평가의 경우 유아 각자의 자기통제력 차이가 평가결과에 반영되었음을 알 수 있었다. 또한 평가자 오차변인의 경우, 분산성분이 전혀 나타나지 않은 것으로 보아 부모와 교사의 평가결과가 일치하고 있으며 따라서 부모를 평가자로 활용할 수 있는 가능성이 있는 검사도구라는 것을 알 수 있었다. 그러나 일부 하위 요인 문항의 경우 오차변인의 비율을 줄일 수 있는 방안을 모색해야 할 필요가 있다는 점을 알 수 있었다. 본 연구의 결과는 유아 자기통제력 평가도구가 가지고 있는 문제점에 대한 탐색을 통해 평가도구의 제작 및 활용 시 적용할 수 있는 정보를 마련해줄 수 있다는 점에서 커다란 의의가 있을 것이라고 판단된다.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.185-192
• /
• 2017

공작기계의 오차는 크게 기하하적 오차, 열변형 오차 및 가공오차로 나눌 수 있다. 본 연구에서는 2차원 가공에서, 각 오차의 원인이 전체 오차에 미치는 영향과 각 오차의 상대적 크기를 정량적으로 분석하였다. 오차의 상대적 크기는 열변형 오차와 가공오차가 상대적으로 기하학적 오차에 비해 크게 나타났으며, 이는 가공 정밀도에 직접적으로 관계된다고 판단되었다. 세 가지 오차를 제거하기 위해 측정된 오차 프로파일을 이용하여 오차의 보정가능성을 검토하였다. 그 결과 각각의 오차요인에 대하여 약 50%의 시스템 오차를 보정할 수 있었으며, 특히, 열변형 오차와 가공오차의 경우 큰 폭으로 오차를 보정할 수 있음을 확인하였다. 본 연구를 통하여 가공에 관한 기본적인 데이터 베이스를 구축할 수 있으며, 이를 통해 사용자 관점에서 가공오차에 대한 보정이 가능할 것으로 기대된다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.147-150
• /
• 2010

Ionopheric deley is the largest error sources in GNSS positining. The single frequency receiver user needs an ionospheric model like the Klobuchar model or NeQuick model to eliminate the ionospheric error. In this study we estimated VTEC(Vertical Total Electron Content) over DAEJ station using the two models in each season. We compared the results with Global Ionosphere Maps and International Reference Ionosphere model predictions. As a result, the NeQuick model was more accurate than Klobuchar model.

• Journal of the Optical Society of Korea
• /
• 제9권4호
• /
• pp.145-150
• /
• 2005

The method to obtain four speckle patterns with relative phase shift of $\pi$/2 by passive devices such as two waveplates and a linear polarizer, and to calculate the phase at each point of the speckle pattern in shearography with a Wollaston prism is described. In this paper, we analyze its potential error sources caused by wave plates.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.74-82
• /
• 2002

In Intensity Modulated Radiotherapy (IMRT), radiation is delivered in a multiple of Multileaf Collimator (MLC) subfields. A subfield with a small leaf-to-leaf opening is highly sensitive to a leaf-positional error. We introduce a method of identifying and rejecting IMRT plans that are highly sensitive to a systematic MLC gap error (sensitivity to possible random leaf-positional errors is not addressed here). There are two sources of a systematic MLC gap error: Centerline Mechanical Offset (CMO) and, in the case of a rounded end MLC, Radiation Field Offset (RFO). In IMRT planning system, using an incorrect value of RFO introduces a systematic error ΔRFO that results in all leaf-to-leaf gaps that are either too large or too small by (2ㆍΔRFO), whereas assuming that CMO is zero introduces systematic error ΔCMO that results in all gaps that are too large by ΔCMO = CMO. We introduce a concept of the Average Leaf Pair Opening (ALPO) that can be calculated from a dynamic MLC delivery file. We derive an analytic formula for a fractional average fluence error resulting from a systematic gap error of Δ$\chi$ and show that it is inversely proportional to ALPO; explicitly it is equal to, (equation omitted) in which $\varepsilon$ is generally of the order of 1 mm and Δx=2ㆍΔRFO+CMO. This analytic relationship is verified with independent numerical calculations.