• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.692-699
• /
• 2003

A novel rotor speed estimation method using Model Reference Adaptive Control(MRAC) is proposed to improve the performance of a sensorless vector controller. In the proposed mettled, the stator current is used as the model variable for estimating the speed. In conventional MRAC methods, the relation between the two model errors and the speed estmation error is unclear. Yet, in the proposed method, the stator current error is represented as a function of the first degree for the error value in the speed estimation. Therefore, the proposed method can produce a fast speed estimation and is robust to the parameters error In addition, the proposed method of offers a considerable improvement in the performance of a sensorless vector controller at a low speed. The superiority of the proposed method is verified by simulation and experiment in a low speed region and at a zero-speed.

• Journal of Communications and Networks
• /
• 제17권4호
• /
• pp.362-369
• /
• 2015

This study addresses the effects of channel estimation error and mutual interference between licensed and unlicensed systems on outage performance of reactive relay selection in unlicensed systems over independent non-identical (i.n.i) Rayleigh fading channels and under both the maximum transmit power constraint and primary outage constraint. Toward this end, power allocation for unlicensed users is first recommended to satisfy both constraints and account for channel estimation error and mutual interference. Then, we derive an exact closed-form outage probability representation for unlicensed systems to quickly evaluate this effect in key operation parameters. Various results corroborate the derived expressions and provide useful insights into system performance.

• 한국군사과학기술학회지
• /
• 제18권1호
• /
• pp.84-92
• /
• 2015

This paper proposes a new approach to reduce the target estimation error of the measurement angle, especially applied to the medium and long range surveillance radar. If the target has no maneuver and no change in heading direction for a certain time interval, the predicted angle of interacting multiple model(IMM) from the previous track information can be used to reduce the angle estimation error. The proposed method is simulated in 2 scenarios, a scenario with a non-maneuvering target and a scenario with a maneuvering target. The result shows that the new fusion solution(weighted IMM) with the predicted azimuth and the measured azimuth is worked properly in the two scenarios.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권3호
• /
• pp.107-117
• /
• 2019

When a vehicle moves with a high rotation rate, it is not easy to measure the angular velocity using an off-the-shelf gyroscope. If the angular velocity is estimated using the extended Kalman filter in the gyro-free inertial navigation system, the effect of the accelerometer error and initial angular velocity error can be reduced. In this paper, in order to improve the navigation performance of the gyro-free inertial navigation system, an angular velocity estimation method is proposed based on an extended Kalman filter with an accelerometer random bias error model. In order to show the validity of the proposed estimation method, angular velocities and navigation outputs of a vehicle with 3 rev/s rotation rate are estimated. The results are compared with estimates by other methods such as the integration and an extended Kalman filter without an accelerometer random bias error model. The proposed method gives better estimation results than other methods.

• 한국항만학회지
• /
• 제10권2호
• /
• pp.61-68
• /
• 1996

The main problems in structural analysis by Finite Eelement Method are difficulty in making data file and error estimation. For decreasing these problems' pays. have been suggesting the adaptive mesh refinement and error estimation method. Posteriory error estimation methods suggested by Jang[1], Babuska[2,3], Ohtsubo[8,9], and this paper. Comparing these methods and examine their properties. According this paper, In the problem supposed having singularity, the method suggested by this paper is good, But the problem supposed having no singularity, the method suggested by Jang[1] is good. For decreasing the effect of initial mesh in p-refinement, make application h-refinement at first and apply p-refinement, and confine polynomial's degree to two, for making program simply by plural mesh models are not needed.

• Journal of Electrical Engineering and information Science
• /
• 제1권2호
• /
• pp.119-124
• /
• 1996

Variable step size LMS(VS-LMS) algorithms improve performance of LMS algorithm by means of varying the step size. This paper presents a new VS-LMS algorithm using normalized absolute estimation error. Normalizing the estimation error to the expected valus of the desired signal, we determined the step size using the relative size of estimation error, Because parameters and computational load are less, our algorithm is easy to implement in hardware. The performance of the proposed algorithm is analyzed theoretically and estimated through simulations. Based on the theoretical analysis and computer simulations, the proposed algorithm is shown to be effective compared to conventional VS-LMS algorithms.

• 한국산학기술학회논문지
• /
• 제22권5호
• /
• pp.561-566
• /
• 2021

오차분포 추정을 위한 커널 사이즈는 오차확률밀도 사이의 유클리드 거리를 최소화 알고리즘의 가중치 갱신에 적합한 커널 사이즈가 될 수 없다. 이 논문에서는 MED 알고리즘의 수렴 성능 향상을 위해 적응적으로 커널 사이즈를 갱신하는 방법을 제안하였다. 제안한 방식은 MED 학습 알고리즘의 가중치 갱신을 위해 커널 사이즈에 대한 오차분산의 평균변화율을 도입하여 MED의 오차에 대한 평균전력이 감소하는 방향으로 커널 사이즈를 조절하도록 하였다. 제안된 적응 커널 추정법을 무선통신 채널의 왜곡 보상에 적용하여 학습 성능을 실험하고 그 효능을 밝혔다. 오차분산에 비례한 작은 값을 가지는 기존의 오차분포 추정 위한 최적 커널 사이즈와 달리, 제안한 방법에 의한 커널 사이즈는 MED 가중치 수렴을 위한 적절한 커널 사이즈로 수렴함을 보였다. 실험 결과로부터 제안한 방법이 MED 알고리즘의 커널 사이즈 설정에 따른 민감성을 크게 해결한 방법이라고 볼 수 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.37-46
• /
• 2004

A novel rotor speed estimation method using model reference adaptive control(MRAC) is proposed to improve the performance of a sensorless vector controller. In the proposed method, the stator current is used as the model variable for estimating the speed. In conventional MRAC methods, the relation between the two model errors and the speed estimation error is unclear. In the proposed method, the stator current error is represented as a function of the first degree for the error value in the speed estimation. Therefore, the proposed method can produce a fast speed estimation. The robustness of the rotor flux-based MRAC, back EMF-based MRAC, and proposed MRAC is compared based on a sensitivity function about each error of stator resistance, rotor time constant, mutual inductance. Consequently, the proposed method is much more robust than the conventional methods as regards errors in the mutual inductance, stator resistance. Therefore, the proposed method offers a considerable improvement in the performance of a sensorless vector controller at a low speed. In addition, the superiority of the proposed method and the validity of sensitivity functions were verified by simulation and experiment.

• 로봇학회논문지
• /
• 제3권3호
• /
• pp.176-185
• /
• 2008

In this paper, new filtering method for sensor registration is provided to estimate and correct error of registration parameters in multiple sensor environments. Sensor registration is based on filtering method to estimate registration parameters in multiple sensor environments. Accuracy of sensor registration can increase performance of data fusion method selected. Due to various error sources, the sensor registration has registration errors recognized as multiple objects even though multiple sensors are tracking one object. In order to estimate the error parameter, new nonlinear information filtering method is developed using minimum mean square error estimation. Instead of linearization of nonlinear function like an extended Kalman filter, information estimation through unscented prediction is used. The proposed method enables to reduce estimation error without a computation of the Jacobian matrix in case that measurement dimension is large. A computer simulation is carried out to evaluate the proposed filtering method with an extended Kalman filter.

• 제어로봇시스템학회논문지
• /
• 제12권2호
• /
• pp.93-100
• /
• 2006

In this paper, a new-type Extended Kalman Filter (EKF) is proposed as a robust nonlinear filter for a stochastic nonlinear system. The original EKF is widely used for various nonlinear system applications. But it is fragile to its estimation errors because they give rise to linearization errors that affect the system mode1 as the modeling errors. The linearization errors are nonlinear functions of the estimation errors therefore it is very difficult to obtain the accurate error covariance of the EKF using the linear form. The inaccurately estimated error covariance hinders the EKF from being a sub-optimal estimator. The proposed filter tries to obtain the upper bound of the error covariance tolerating the uncertainty of the error covariance instead of trying to obtain the accurate one. It treats the linearization errors as uncertain modeling errors that can be handled by the robust linear filtering. In order to be more robust to the estimation errors than the original EKF, the proposed filter minimizes the upper bound like the robust linear filter that is applied to the linear model with uncertainty. The in-flight alignment problem of the inertial navigation system with GPS position measurements is a good example that the proposed robust filter is applicable to. The simulation results show the efficiency of the proposed filter in the robustness to initial estimation errors of the filter.