• 한국정밀공학회지
• /
• 제7권1호
• /
• pp.63-73
• /
• 1990

Low cost automatic welding machine is developed for the purpose of welding process automation of automobile parts with two dimensional welding joints. Developed gantry type machine is equipped with X, Y and roll axis stepping motors, and dirive units units are designed by two phase on drive scheme using shift registers. Control system is constructed by single board microcomputer of Z80A CPU, and also it is equipped with parallel input output ports and counter-timer chips. Linear and circular interpolation of welding head movement is accomplished by employing software digital differential analyzers. It has been shown that contour error of develped system is withi ${\pm}1.0mm$, meaning that the machine is suitable for CO2 arc welding process of automoble parts and is expected it's application to industry.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1338-1346
• /
• 1994

The objective of this study is to investigate the effect of various parameters, such as temperature, mean current density and voltage on the performance of phosphoric acid fuel cell (PAFC) by numerical analysis. Two types of flow passages, which are Z-parallel type and Z-counter type, are evaluated to obtain the best current density and temperature distribution. Parametric studies and sensitivity analysis of the PAFC system's operation in single cell are accomplished. A steady state simulation of the entire system is developed using nonlinear ordinary differential equations. The finite difference method and trial and error procedures are used to obtain a solution.

• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.361-369
• /
• 1991

The optics and the signal processor of dual beam laser Doppler velocimeter(LDV) was fabricated. By using the dual beam and the forward scattering, the optics part of LDV was fabricated. And the signal processor of LDV was designed by the frequency counter type using new 11:6 period timing device in order to remove error signals, and was made of the reference clock of a 500 MHz ECL oscillator. Doppler frequencies from 10KHz to 70MHz can be measured using the signal processor. In the accuracy of the period counting part, from 1.81x10**-4% to 1.27% is estimated, and in the accuracy of the validation logic part, from 0.78% to 14.78% is estimated.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.115-121
• /
• 2011

This study is about comparison of tangental entry type cyclone dust collector with axial vane type cyclone dust collector. Cut diameter and dust collection efficiency of both collector was compared by theory and experiment. Cut diameter was calculated by an quasi-empirical formula by Lapple and Shepherd. Measurement of cut diameter was conducted by particle counter through dust generator. As the result, cut diameter obtained by experiment was a little larger than that by theory. But the error is within $0.5{\mu}m$ in both type of collector, so it could be confirmed that theoretical value and experimental value were almost identical. And, as flow rate increased, dust collection efficiency was increased. Also axial vane type showed higher dust collection efficiency than tangental entry type. Therefore, it can be said that axial vane type cyclone dust collector has higher performance than the other.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권2호
• /
• pp.152-156
• /
• 2013

This paper presents a fast-lock dual-loop successive approximation register-controlled duty-cycle corrector (SARDCC) circuit using a mixed (binary+sequential) search algorithm. A wider duty-cycle correction range, higher operating frequency, and higher duty-cycle correction accuracy have been achieved by utilizing the dual-loop architecture and the binary search SAR that achieves the fast duty-cycle correcting property. By transforming the binary search SAR into a sequential search counter after the first DCC lock-in, the proposed dual-loop SARDCC keeps the closed-loop characteristic and tracks variations in process, voltage, and temperature (PVT). The measured duty cycle error is less than ${\pm}0.86%$ for a wide input duty-cycle range of 15-85 % over a wide frequency range of 0.5-2.0 GHz. The proposed dual-loop SARDCC is fabricated in a 0.18-${\mu}m$, 1.8-V CMOS process and occupies an active area of $0.075mm^2$.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.77-86
• /
• 2006

Usually, a tracking-gate of the tracker is used to track the target radar signal in the active ECM system. In this paper, we propose the feed-back tracking-gate filtering method. The designed method applies a tracking-gate of the tacker to the ECM system's receiver as a rejection or pass filter selected by the receiver's purpose, and the specific target signals can be passed or rejected though this tracking-gate filter. Thus, the number of input signals within the receiver's search band is minimized owing to this filter except the target signals. In conclusion, the EW equipment's reaction time can be reduced and the error value about the target signals can be lower than the previous methods'.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.522-523
• /
• 2017

전류컨베이어 회로와 시간-디지털 변화기를 이용하여 아날로그-디지털 변환기를 설계하였다. 전류컨베이어 회로를 이용하여 아날로그 전압의 크기를 샘플링한 다음, 전류원을 이용하여 샘플링 전압을 방전하면서 아날로그 전압을 시간정보로 변환하였다. 시간정보는 카운터 타입의 시간-디지털 변환기를 이용하여 디지털 값으로 변환되는데 이때 변환 에러를 감소시키기 위해 시간정보 펄스와 동기화된 클록을 생성하여 사용하였다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.565-578
• /
• 2022

Among Generation IV reactors, the sodium-cooled fast reactor (SFR) is attracting attention as a system having great potential for commercial use. Gas entrainment is a thermal-hydraulic issue related to the safety problem of the reactor core in the SFR. Typically, a dipped plate or baffles are installed under the free surface to suppress gas entrainment. However, these approaches can cause gas entrainment in other locations and require many trial-and-error and verifications. In this study, a new strategy using magnetohydrodynamics to suppress gas entrainment in the SFR is proposed. In a counter-flow model, a judgment criterion of gas entrainment occurrence was developed for both water and liquid metal. Moreover, the gas entrainment can be completely suppressed by applying a magnetic field.

• 인지과학
• /
• 제34권3호
• /
• pp.243-257
• /
• 2023

이 논문의 목적은 고유수용성 감각(proprioception)이 자신의 신체와 신체적 행위(physical action)에 대해 소유감(sense of ownership)을 부여하는 것을 검토하는 데 있다. 고유수용성 감각은 외부 자극을 받아들이는 외수용기가 아닌 신체 내부의 신경조직인 내수용기에 의존하는 감각으로, 신체 부분(bodily parts)의 존재, 위치, 움직임을 아는데 있어 인식적으로 중요하다. 본고에서는 고유수용성 감각의 중요한 특징 중 하나인 일인칭성에 주목하여 슈메이커의 '오식별 오류에의 면역성Immunity to Error through Misidentification(이하 IEM)'이 고유수용성 감각에 적용할 수 있음을 논증하고자 한다. 필자는 다음 두 가지 주장을 비판적으로 검토하고 심리철학자 마르셀이 제기하는 병리적 반증사례를 차례대로 모두 격파함으로써 두 주장을 공고히 한다. 첫째, 고유수용성 감각은 내 신체와 신체적 행위에 관한 소유감을 제공한다는 점에서는 오류불가능하다. 둘째, 고유수용성 감각은 내 신체와 신체적 행위의 소유감을 위해 필수불가결하다.

• 물과 미래
• /
• 제28권5호
• /
• pp.219-233
• /
• 1995

강우의 평균과 분산이 시 공간적으로 변하는 비정상 다변량 모형을 강우모형으로 선정하였다. 그리고 강우모형의 상태 및 매개변수의 추정을 위해 비정상 대변량 모형의 잔차항에 Kalman Filter 순환추정 알고리즘을 적용하여 강우예측모형 시스템을 구성하였다. 그후 반응시간이 짧은 도시지역에 설치된 T/M 강우관측소에 입력되는 매 시간(10분간격) 강우자료를 사용하여 호우개수방법에 의한 비정상(Non-stationary) 평균과 분산의 추정 그리고 호우속도 추정을 통한 정규잔차 공분산을 추정하여 다수의 지점들 및 선행시간들의 실시간 다변량 단기 강우예측 (On-line, Real-time, Multivariate Short-term, Rainfall Prediction)을 하였다. 강우예측시스템 모형에 의한 결과와 비정상 변량 모형에 의한 강우모의 결과가 잘 일치하였다. 그리고 예측정도를 측정하는 방법인 제곱 평균 제곱근 오차(RMSE)와 모형 효율성 계수(ME)를 분석한 결과, 강우 예측시간 즉 선행시간이 갈수록 제곱 평균 제곱근 오차가 커지고 모형 효율성 계수가 1로부터 점차 작아지는 것으로 보아 강우예측 정도가 떨어지는 것을 알 수 있었다. 또한 호우개수방법으로 구한 평균이 호우구조의 많은 부분을 차지하고 있음을 알 수 있었다.