• 대한교통학회지
• /
• 제21권2호
• /
• pp.119-130
• /
• 2003

SP 자료는 현재 존재하지 않는 교통정책 및 계획의 평가를 위해 광범위하게 이용되어 왔으나 현시선호와의 연계가 단점으로 지적되어 왔다. 이를 극복하는 방법의 하나로서 현시선호자료, 즉 RP 자료와의 결합이 제시되어 왔으며 RPㆍSP 결합방법론이 개발되었다. 본 논문의 목적은 Error Component 방법을 이용하여 새로운 RPㆍSP 결합방법을 제시하고 그 유용성을 입증하는 것이다. Error Component 방법은 SP 자료 또는 RP 자료의 상대적인 분산을 구하기 위해 각 자료의 오차를 분할하고 이에 대한 파라메타와 효용의 파라메타를 동시에 추정하는 것이다. 이를 위한 분석자료는 시뮬레이션을 통해서 인위적인 RP 자료와 SP 자료를 생성하여서 사용하였고 생성된 자료로 Error Component 방법을 이용한 결합모형과 기존의 결합방법의 결과를 파라메타 및 시간가치를 척도로 비교ㆍ분석하였다. 연구 결과 본 연구에서 제시한 방법론이 자료의 규모에 관계없이 일관되게 기존 RPㆍSP 결합방법에 의해 추정된 모형보다 가정된 파라메타 값에 일치함을 보여줘 Error Component 방법이 유용함을 증명하였다. 또한 파라메타의 비로 표현한 시간가치도 Error Component 방법의 적용값이 기존방법론의 적용값보다 가정된 값과 유사한 값을 보여 줘 본 연구가 제시한 방법의 우월성을 입증하였다. 또한 기존 결합모형인 동시적 모형과 순차적 모형이 모두 RP자료와 SP자료를 결합하는 방법으로 유용하게 사용될 수 있음을 보여주었으나 동시적방법이 보다 순차적방법보다 효율적인 방법으로 분석되었다.

• Journal of the Korean Statistical Society
• /
• 제29권1호
• /
• pp.63-80
• /
• 2000

We consider the panel data regression model with nested error componets. In this paper, the several Lagrange Multipler tests for the nested error component model are derived. These tests extend the earlier work of Honda(1985), Moulton and Randolph(1989), Baltagi, et al.(1992) and King and Wu(1997) to the nested error component case. Monte Carlo experiments are conducted to study the performance of these LM tests.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.709-718
• /
• 2019

The international nuclear industry has undergone a lot of changes since the Fukushima, Chernobyl and TMI nuclear power plant accidents. However, there are still large and small component deficiencies at nuclear power plants in the world. There are many causes of electrical equipment defects. There are also factors that cause component failures due to human errors. This paper analyzed the root causes of failure and types of human error in 300 cases of electrical component failures. We analyzed the operating experience of electrical components by methods of root causes in K-HPES (Korean-version of Human Performance Enhancement System) and by methods of human error types in HuRAM+ (Human error-Related event root cause Analysis Method Plus). As a result of analysis, the most electrical component failures appeared as circuit breakers and emergency generators. The major causes of failure showed deterioration and contact failure of electrical components by human error of operations management. The causes of direct failure were due to aged components. Types of human error affecting the causes of electrical equipment failure are as follows. The human error type group I showed that errors of commission (EOC) were 97%, the human error type group II showed that slip/lapse errors were 74%, and the human error type group III showed that latent errors were 95%. This paper is meaningful in that we have approached the causes of electrical equipment failures from a comprehensive human error perspective and found a countermeasure against the root cause. This study will help human performance enhancement in nuclear power plants. However, this paper has done a lot of research on improving human performance in the maintenance field rather than in the design and construction stages. In the future, continuous research on types of human error and prevention measures in the design and construction sector will be required.

• Journal of the Korean Statistical Society
• /
• 제28권4호
• /
• pp.489-501
• /
• 1999

In this paper, we consider the panel data regression model in which the disturbances have nested error component. We derive a Lagrange Multiplier(LM) test which is jointly testing for the presence of random individual effects and nested effects under the normality assumption of the disturbances. This test extends the earlier work of Breusch and Pagan(1980) and Baltagi and Li(1991). Further, it is shown that this LM test has the same asymptotic distribution without normality assumption of the disturbances.

• 환경정책연구
• /
• 제3권2호
• /
• pp.89-112
• /
• 2004

This Study aims to demonstrate how much flood vulnerability in urban area changed for the past 32 years by using the panel model. At the same time, this study strives to determine the primary factors and to construct an effective counter-plan by means of empirical research. After selecting research hypotheses based on considerations of issues concerning causes for urban flooding, their relevance is put to the test by conducting empirical research in individual case locations. This research verifies the four research hypotheses by using one-way error component regression model. In conclusion, this research has shown that urban land use and local characteristics act as significant flood determinants, with forests acting to reduce flood dangers. Moreover, constructing embankments can no longer represent a reliable flood control policy. The changes in future flood control policies need to incorporate local characteristics and to minimize natural destruction, so that humans and nature can coexist through environmentally friendly flood management policies.

• Journal of the Korean Data and Information Science Society
• /
• 제8권2호
• /
• pp.127-134
• /
• 1997

A method is proposed for the choice of the number of principal components in principal component regression based on the predicted error sum of squares. To do this, we approximately evaluate that statistic using a linear approximation based on the perturbation expansion. In this paper, we apply the proposed method to various data sets and discuss some properties in choosing the number of principal components in principal component regression.

• 대한인간공학회지
• /
• 제1권2호
• /
• pp.11-15
• /
• 1982

There is the possibility that human error during testing and maintenance brings about the failure of the system, the reliability of which depends on mechanical failure and human error. This paper deals with the calculation of the reliability of the redundant system with the dependent hunman error through Karnaugh Map. Two cases are considered. One is the reli- ability of the system neglecting the test interval of each component and the other is that considering the test interval of each component.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.172-179
• /
• 1998

To quickly determine the effect of the substitute component on the machine's performance is very important in the design and manufacturing processes. And minimizing machine cost and maximizing machine quality mandate predictability of machine accuracy. In this study, in order to evaluate the effects of the component's geometric errors and dimensions on the machining accuracy of gantry-type 5-axis machining centers, a geometric error analysis and virtual manufacturing system are developed based on the mathematical model for the shape generation motion of machine tool considering the component's geometric errors and dimensions, the solid modeling techniques and so on.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.68-76
• /
• 2014

This paper presents an offset error compensation algorithm for the accurate phase angle of the grid voltage in single-phase grid-connected inverters. The offset error generated from the grid voltage measurement process cause the fundamental harmonic component with grid frequency in the synchronous reference frame phase lock loop (PLL). As a result, the grid angle is distorted and the power quality in power systems is degraded. In addition, the dq-axis currents in the synchronous reference frame and phase current have the dc component, first and second order ripples compared with the grid frequency under the distorted grid angle. In this paper, the effects of the offset and scaling errors are analyzed based on the synchronous reference frame PLL. Particularly, the offset error can be estimated from the integrator output of the synchronous reference frame PLL and compensated by using proportional-integral controller. Moreover, the RMS (Root Mean Square) function is proposed to detect the offset error component. The effectiveness of the proposed algorithm is verified through simulation and experiment results.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.109-115
• /
• 1998

This paper describes the development of a 6-component load cell with plate beams which may be used to measure forces Fx, Fy, Fz and moments Mx, My, Mz simultaneously in industry. We have analyzed the bending strains on the surface of the beams under forces or moments by using Finite Element Method and designed the sensing elements of 6-component load cell. We have also determined the attachment location of strain gages of each load cell and fabricated 6-component load cell. To evaluate the rated strain and interference error of each load cell, we have carried out characteristic test of 6-component load cell.