• 대한전기학회논문지
• /
• 제36권9호
• /
• pp.685-690
• /
• 1987

Adaptive design of IIR digiral filters using equation error method has been studied. In this paper, a design technique of IIR digital filters using output error method with adaptive compensator is presented. In computer simulation results, it is shown that flat response characteristic in pass-band, below-40[dB] attenuation characteristic in stop-band, sharf cut-off characteristic in transition-band, and phase characteristic is linearin pass-band.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.175-178
• /
• 2000

An aerostatic stage has frictionless behavior, so it has a advantage of investigation into positioning characteristics. A one-dimensional aemstatic ceramic stage with ballscrew driven and laser scale feedback system is manufactured. aiming at investigating positioning characteristic of aerostatic stage, especially position error and repeatability, we analyze positioning behavior with other factors such as angular error, temperature. Experimemal results show that the aerostatic stage has a l0nm micro step response. Comparing experimental results and calculated abbe's error, we confirm that mean of position error is owing to angular error. And, also we confirm the temperature is dominant factor of repeatability in ten nm order.

• Journal of applied mathematics & informatics
• /
• 제29권5_6호
• /
• pp.1205-1219
• /
• 2011

In this work, a stabilized characteristic finite volume method for the time-dependent Navier-Stokes equations is investigated based on the lowest equal-order finite element pair. The temporal differentiation and advection term are dealt with by characteristic scheme. Stability of the numerical solution is derived under some regularity assumptions. Optimal error estimates of the velocity and pressure are obtained by using the relationship between the finite volume and finite element methods.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.381-384
• /
• 2003

Among digital halftoning methods, error diffusion is a procedure for generating high quality bilevel images from continuous-tone images but blurs the edge information in the bilevel images. To solve the problem, we propose the edge enhanced error diffusion using the edge information of the original images. The edge enchanted weights is computed by adding local characteristic weights and input pixels multiplied a constant. Also, we combined the edge enhanced method with the adaptive error diffusion using human spatial and frequency perception characteristic. The performance of the proposed method is compared with conventional method by measuring the edge correlation. The halftoned images applied the proposed method get more fine quality due to the enchanced edge and better quality in halftoned image. And the detailed edge is preserved in the halftoned images by the proposed method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.1031-1032
• /
• 2009

• 한국유체기계학회 논문집
• /
• 제12권5호
• /
• pp.33-38
• /
• 2009

In this study, the effect of flow disturbance such as contraction, expansion pipe and velocity deviation from low velocity of $0.1\;^m/s$ to $2.5\;^m/s$ on the error characteristics of the flowmeter was studied. Flow experiments using flowmeter calibration facility of K-water were undertaken for the cases of ultrasonic flowmeter based on transit-time method and electromagnetic flowmeter. Experimental results are presented that measurement error of expansion pipe are larger than contraction pipe. It is shown that the minimum straight length were required to remain of ${\pm}0.5%$ error for electromagnetic flowmeter and ${\pm}2.0%$ error for ultrasonic flowmeter.

• 한국산업융합학회 논문집
• /
• 제24권1호
• /
• pp.1-7
• /
• 2021

In this paper, we presented the experimental basis for the theoretical background and robustness of the Convolutional Neural Network for object recognition based on artificial intelligence. An experimental result was performed to visualize the weighting filters and feature maps for each layer to determine what characteristics CNN is automatically generating. experimental results were presented on the trend of learning error and identification error rate by checking the relevance of the weight filter and feature map for learning error and identification error. The weighting filter and characteristic map are presented as experimental results. The automatically generated characteristic quantities presented the results of error rates for moving and rotating robustness to geometric changes.

• 대한전자공학회논문지SP
• /
• 제37권4호
• /
• pp.20-28
• /
• 2000

오차확산 하프토닝 기법은 연속계조 영상을 이진영상으로 생성시 우수한 재현성을 보인다. 그러나 표시오차의 특성분석에서 경계정보의 재현성이 다소 떨어지는 특성을 보인다. 이러한 경계정보의 재현성 개선하기 위해 전처리 필터를 적용하는 오차확산 기법을 제안한다. 제안한 전처리 필터는 원영상의 수평 및 수직 방향의 미분값, 필터의 가중치 함수로 구성된다. 첫째, 원영상의 수평 및 수직 방향의 미분값은 현재 화소를 중심으로 하여 $3{\times}3$ 인접화소에 Sobel 연산자를 적용시켜 얻는다. 둘째, 필터의 가중치 함수는 미분값의 크기를 포함하는 함수와 미분값의 부호로 구성된다. 제안한 기법을 적용한 하프토닝 영상은 경계가 강조되어 시각적으로 선명한 결과를 보인다. 원영상과 오차확산된 하프토닝 영상과의 차이(표시오차)를 환상 평균 전력 스펙트럼 밀도를 이용하여 기존의 경계강조 오차확산 알고리즘과 비교한다.

• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.235-240
• /
• 2008

The large size electromagnetic flowmeter was tested to investigate the variation of its error characteristics in the range of low velocity under 0.6 m/s using flowmeter calibration system. For the two case of valve opening rate 100 % and 50 %, these tests were undertaken three times each for twelve velocity condition from $0.05\;^m/s\;to\;0.6\;^m/s$ with increment of $0.05\;^m/s$. It is shown that error characteristic of electromagnetic flowmeter was stabilized within ${\pm}0.4%$ of rate both higher than $0.25^m/s$ of velocity condition and 50 % of valve opening position. But, measurement deviation of flowmeter for ${\Phi}400mm\;and\;{\Phi}600mm$ was out of expected deviation range. It is necessary to correction with calibration. In conclusion, error characteristic of electromagnetic flowmeter wasn't changed proportion to its size.

• 한국전자파학회논문지
• /
• 제16권11호
• /
• pp.1099-1105
• /
• 2005

TRL 오차 수정 방법은 PCB 위에 제작된 고주파 소자를 측정할 때 많이 사용되는 방법이지만 오차 수정을 위해 제작된 표준 전송선 패턴의 특성 임피던스를 알아야만 보다 정확하게 측정 오차를 수정할 수 있다. 기존의 방법에서는 저항을 종단 처리한 표준 패턴을 추가로 이용하여 전송선의 단위 길이당 커패시턴스를 계산하고 주파수에 대해 fitting하는 방법으로 표준 전송선의 특성 임피던스를 계산하고 있으나 제작상의 부정확성에 의해 추출된 특성 임피던스가 영향을 받고 있음을 확인하였다. 본 논문에서는 측정된 S-parameter를 이용하여 제작상의 부정확성을 줄일 수 있고 기존 방법보다 정확한 특성 임피던스를 추출할 수 있다.