• 대한인간공학회지
• /
• 제26권3호
• /
• pp.45-52
• /
• 2007

Shipbuilding workers are potentially exposed to ergonomic hazards in the manufacturing process. The purpose of this study is to describe the impact of an ergonomic intervention and the implementation effect of ergonomics program at a shipbuilding company. This study portrays an implementation procedure of ergonomics program over a period of two years concerning ergonomic hazard analysis and improvement, along with medical management. After implementation of the ergonomics program, the productivity improved, and the rate of accidental incidents decreased, also the loss of workdays decreased largely. The implementation effect of ergonomics program presented in this study can be used to provide baseline information for the prevention of musculoskeletal disorders in the shipbuilding industry.

• 산업공학
• /
• 제12권2호
• /
• pp.247-253
• /
• 1999

The main objective of this study is to quantify the appropriateness of the sensibility vocabularies used in sensibility ergonomic evaluation scheme by applying structural equation model. In the conventional sensibility ergonomic evaluation scheme, factor analysis is employed to classify various vocabularies into some common factors. However, since the vocabularies were chosen quite subjectively, it is difficult to ascertain that they represent the product attributes properly. It was shown in a case study that the structural equation model provides the quantitative results to verify whether the selected vocabularies are eligible for further steps of sensibility ergonomic evaluation.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.499-523
• /
• 2017

Objective: This study is to provide a foundation for developing comprehensive ergonomic design guidelines for in-vehicle information systems (IVIS) by giving an overview of existing researches as well as setting further research directions. Background: The drivers get much more information recently while interacting with new safety functions of the cars. To avoid cognitive overload of the drivers, IVIS should be deigned appropriately by considering various human factors and task conditions. Method: We gathered, analyzed, and summarized ergonomic researches concerned with IVIS design conducted inside and outside Korea according to a categorization system proposed in the study. Frequency analysis was conducted for figuring out what kind of issues took major part of the researches, and their trends across time and regions. Results: Compared to domestic researches, those done in overseas tend to deal with more variety of independent, dependent and extraneous variables. The overseas researches also showed a tendency to get ahead in making ergonomic guidelines for IVIS design by adapting and integrating the results from previous researches. Conclusion and Application: There have been many researches regarding with ergonomic IVIS design, but some of their results became old-fashioned as the technology evolved. Not many researches have considered diverse human factors regarding the drivers' characteristics except age and gender. It is expected that researchers and designers take advantage of this study to find and review relevant results and set out issues of their own for more progressive researches of the field.

• 대한인간공학회지
• /
• 제19권1호
• /
• pp.23-36
• /
• 2000

In conventional ergonomics, consumer product can be made based on anthropometric data and specific design guideline. However, the product may not satisfy consumers because their emotional preference have not been properly considered in design phase. Therefore, in this study a new chair design process was introduced by which both consumer's emotional need and traditional ergonomic requirement can be satisfied. As a part of the process, the traditional Kansei engineering technique was modified to collect quantitative information of consumer's visual appreciation and physical feedback of various types of chairs. Furthermore, we developed an interface, so called, KADAS(Kamsung Analysis and Design Assistance System), for designers to use the technique in chair design. This software can help designers to understand what should be the most suitable shape in designing items such as seat, back and arm rest, etc. to meet the emotional need of consumers. This software displays the result of modified quantification theory I, and explains how to use the statistics. This study suggested a new approach for ergonomic design incorporated with Kansei Engineering technique. This technique can be also applied to other products by extending the database of KADAS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2660-2664
• /
• 2003

In this study, the concept of autonomous mobility is applied to a medical service robot. The aim of the development of the service robot is for the elderly assisting walking rehabilitation. This study aims that the service robot design parameter is proposed in ergonomic view. The walking assistant path pattern is derived from analyzing the elderly gait analysis. A lever is installed in the AMR in order to measure the pulling force and the leading force of the elderly. A lever mechanism is applied for walking assistant service of the AMR. This lever is designed for measuring the leading force of the elderly. The elderly adjusts the velocity of the robot by applying force to the lever. The action scope and the service mechanism of the robot are developed for considering and analyzing the elderly action patterns. The ergonomic design parameters, that is, dimensions, action scope and working space are determined based on the elderly moving scope. The gait information is acquired by measuring the guide lever force by load cells and working pattern by the electromyography signal.

• 대한인간공학회지
• /
• 제26권2호
• /
• pp.81-88
• /
• 2007

The objective of this study was to investigate the validity of the digital ergonomic simulation (DES) method as a prospective alternative to the ergonomic analyses conducted by experts. The DES method utilizes commercial digital manufacturing software, and can compute the RULA scores continuously throughout the simulated work cycle. It was shown in a case study that the accuracy and objectivity of the DES method are superior to those obtained by experts. Also, it was demonstrated that the DES method has a distinct capability to simulate and validate a proposed work plan. Major limitations of the current DES method lie in the extensive time and efforts required for accurate digital simulation, which may be overcome through an automatic module for RULA data acquisition and a motion capture system.

• 농촌의학ㆍ지역보건
• /
• 제44권3호
• /
• pp.138-143
• /
• 2019

양봉 작업은 들기 작업이 많아 근골격계 부담이 컸으며 양봉 농업인의 대부분이 지난 1년 동안 직업과 관련된 근골격계 질환 증상을 호소했다. 보조도구인 벌통리프트를 사용하면 양봉 작업으로 인한 근골격계 부담을 줄일 수 있다.

• 대한인간공학회지
• /
• 제33권2호
• /
• pp.97-108
• /
• 2014

Objective:The present study is intended to evaluate the usability of a console chair for a weapon locating radar by comparing with different kinds of chair design. Background: Console chairs need to be ergonomically designed to reduce physical workload of operators and improve mission capability; few studies have been reported which systematically evaluate usability of military console chairs. Method: Ergonomic design of a console chair, a bus seat, and an office chair was evaluated in terms of headrest, seatback, seatpan, armrest, and controller on a 7-point scale. Ten males in their 20s and 30s were recruited considering the demographic characteristics of console operators. Results: The satisfaction scores of the console chair for headrest, seatback, and seatpan were significantly higher than those of the bus seat (mean difference [MD] = 0.9) and office chair (MD = 1.3). Meanwhile, the satisfaction scores of the console chair for armrest and controller were significantly lower than those of the office chair (MD = -1.4) and bus seat (MD = -2.2). Conclusion: The armrest and controller of the console chair needs ergonomic improvements for better comfort. Application: The evaluation results of the console chair would be of use for ergonomic console chair design.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.171-181
• /
• 2009

This study was carried out to evaluate a musculoskeletal symptom and the work posture of the nurses in an operating room who have worked in the present department for more than one year. The job analysis of operating room nurses for ergonomic work posture analysis is divided into 14 tasks. On the basis of that, a survey research and ergonomic work posture analysis are also carried out. Among 41 operating room nurses of a cancer center in Kyonggi province who responded to the self-administered questionnaire, 20 nurses were observed and videorecorded to apply Rapid Entire Body Assessment(REBA) to ergonomic work posture analysis from April 16, 2007 to May 18, 2007. The results of analysis are as follows. The prevalence rate of musculoskeletal symptoms was 75.6% and its prevalence rates by part of the body are these followings; lower back and leg/foot 43.9%, shoulder 36.6%, neck 34.1%, hand/wrist/ finger 22.0%, arm/elbow 14.6%. In accordance with the results of ergonomic work posture analysis, 4 tasks that have a REBA score of 8 have high-risk levels and require an immediate management. It shows there is a significant correlation with overall musculoskeletal symptoms and objective workloads that are estimated by REBA. In conclusion, the work conditions of operating room nurses should be improved. It is also necessary that inappropriate work postures and ergonomic work conditions are improved to prevent musculoskeletal disorders of operating room nurses.

• 한국산업보건학회지
• /
• 제19권4호
• /
• pp.390-402
• /
• 2009

This study aimed to examine the general characteristics of individual workers, psychosocial working environment, and ergonomic risk factors which affect the status of musculoskeletal disorders. Self-report was carried out for musculoskeletal symptoms and ergonomic risks in working environment in 856 production workers in 16 small to medium sized manufacturing companies. Musculoskeletal symptoms were examined with a standardized questionnaire, and ergonomic risks were evaluated with a qualitative self-administered instrument for the tasks related to musculoskeletal disorders. Major findings were as follows: 1) Complaint rate for musculoskeletal symptoms was higher in female, aged, married workers with longer working hours, less leisure/hobby activity, longer household working hours and history of disease or accident. 2) Complaint rate for musculoskeletal symptoms was significantly higher in workers with dissatisfaction, difficult tasks, and no self-control at work. 3) Complaint rate for musculoskeletal symptoms was significantly higher in workers involved in tasks with major ergonomic risk factors, and handling heavy equipment. 4) Explanatory power increased the model with the musculoskeletal symptoms as dependent variable and demographic variables, psychosocial working environment and ergonomic risk factors included, and total explanatory power of 18.6% revealed the significant effect. Based on the results, we can conclude that musculoskeletal symptoms in manufacturing workers are associated with individual demographic characteristics, psychosocial working environment and ergonomic risk factors.