• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.77-84
• /
• 2006

Unlike homogeneous material structure, the behavior of masonry structure is not perfectly elastic even in the range of small deformations because it is a non-homogeneous and anisotropic composite structural material, consisting of masonry units, mortar, and grout. This paper proposes a simplified way of investigating the evolution of the deformation and damage of the structure subjected to a series of successive ground motions with varying shaking. Especially, the most simple but useful algorithm of Fast Fourier Transformation (FFT) has been adopted to investigate the evolution of the deformation and damage of the structure tested on the shaking table. Moreover, the development of a hi-linear curve for an equivalent SDOF system which is obtained by exploiting the frequency and stiffness relationship was discussed. Finally, some important findings related to inelastic properties of the URM are summarized.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1686-1696
• /
• 2022

The impedance matching circuit design technique based on the phasor plot introduced in this paper is based on the impedance triangle of electric circuit. It is a technique that designs through the construction of a phasor figure using the values given to the matching circuit design. The design pattern is based on L-type, inverted L-type, T-type, and 𝜋-type, and unknown reactance elements are determined through phasor shapes. In this paper, using a design by phasor plot, we design several cases, such as the case where the input and output ports are pure resistance and have reactance. It was confirmed that the design value was verified by serial-parallel equivalent conversion to achieve matching. This design technique can immediately grasp the phase or size of input/output power, so it is expected to be applied mainly in a low frequency band due to rapid design change and application.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.696-708
• /
• 2002

In this paper, a novel transcoding algorithm for the Adaptive Multi Rate(AMR) and the Enhanced Variable Rate Codec(EVRC) vocoders via direct parameter transformation is proposed. In contrast to the conventional tandem transcoding algorithm, the proposed algorithm converts the parameters of one coder to the other without going through the decoding and encoding processes. The proposed algorithm consists of the parameter decoding, frame classification, mode decision, and transcoders for two frame types. The transcoders convert the parameters such as LSP, frame energy, pitch delay for the adaptive codebook, fixed codebook vector, and codebook gains. Evaluation results show that while exhibiting better computational and delay characteristics, the proposed algorithm produces equivalent speech quality to that produced by the tandem transcoding algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1036-1055
• /
• 1992

In this paper the feedback linearization of the valve-controlled nonlinear hydraulic velocity control system and the implementation of the digital state feedback controller is studied. The $C^{\infty}$ nonlinear transfomation to the electro-hydraulic velocity control system, which transforms nonlinear system to linear equivalent one, is obtained. It is shown that this transformation is global one. The digital controller to this linearized model is obtained by using the one-step ahead state estimator and implemented to real plant. The proposed implementation method is easier than the other proposed methods and it is possible to control in real time. The experiment and simulation study show that the implementation of the digital state feedback controller based on the feedback linearized model is successful..

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.71-83
• /
• 2003

In this paper, a novel transcoding algorithm for the G.729A and the Selectable Mode Vocoder(SMV) vocoders via direct parameter transformation is proposed. In contrast to the conventional tandem transcoding algorithm, the proposed algorithm converts the parameters of one coder to the other without going through the decoding and encoding processes. In transcoder from SMV to G.729A, LSP conversion algorithm, pitch delay conversion algorithm and transcoding algorithm in lower rate are proposed, and in transcoder from G.729A to SMV, LSP conversion algorithm, pitch delay conversion algorithm and rate selection algorithm are proposed. Evaluation results show that while exhibiting better computational and delay characteristics, the proposed algorithm produces equivalent or Improved speech quality to that produced by the tandem transcoding algorithm.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.4
• /
• pp.549-556
• /
• 2002

The natural frequency of a system is commonly used in evaluating the serviceability condition of a floor. However. the current equations recommended in many building codes do not consider the various material types of a slab system; thus. different results are observed. Likewise. the transformation of a slab section required to predict the natural frequency of a composite deck plate is complicated. due to the varying shapes of the deck plates. Therefore. a new and simplified method of transforming a composite slab into an equivalent concrete slab is proposed. he modified vibration prediction equation was proposed based on the current vibration prediction equation recommended by LRFD. Compared to other equations. it is the closest to those obtained from experiments. The modified equation provides about 14.3% more accurate results than that recommended by LRFD. Likewise. the applicability of the proposed equation to other types of composite deck plate floor system was validated.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.160-173
• /
• 2011

Increased internet use under a ubiquitous environment may be called as a great human information space revolution followed by Industrial Revolution. This revolution is exerting its significant influence over all the industry as a whole with speed faster than that of any other times. Along with this trend, if furniture design field that leads living culture should fail to jump on this main stream without noticing it, it may be reduced to a unpopular field some day without any sign of recovery. Under this background, this study is intended to recognize a goal aiming at understanding our rapidly changing living environment and leading our way positively. Currently, our surrounding living environment is immersed in computers here and there and Mark Weiser once defined a system that moves in advance before an action as ubiquitous computing and in this respect, I am going to observe a detailed transformation process of space. First nature of the space may be defined as atoms, a physical space equivalent to a spatial element and Bits space that is untouchable is usually called as 2nd space and a combination of atoms and Bits is an intelligent space - 3rd space - that can be intelligible without touching it and finally, this space is called as a ubiquitous space. This spatial transformation is developed by several changes of living environment and we may call it as living trend or interior design trend. Transformation in terms of social perspective, space structural perspective and digital technique perspective may be enumerated. These transformations were surveyed based on its contents being implemented at a future housing exhibition hosted by 5 construction companies along with fusion of information furniture and furniture depending on each housing space. In conclusion, it could be realized that most of the companies were decorating future space by implementing ubiquitous environment as a success factor of future housing market. It may be meaningful to note once again that under an interior environment, a fusion of furniture and information furniture is required considering interior trend elements.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.41-50
• /
• 2011

Code obfuscation has been proposed to protect codes in a program from malicious software reverse engineering. It converts a program into an equivalent one that is more difficult to understand the program. Code obfuscation has been classified into various obfuscation technique such as layout, data, control, by obfuscating goals. In those obfuscation techniques, control obfuscation is intended to complicate the control flow in a program to protect abstract information of control flow. For protecting control flow in a program, various control obfuscation transformation techniques have been proposed. However, strategies for effectively applying a control flow obfuscation to program have not been proposed yet. In this paper, we proposed a obfuscation strategy that effectively applies a control flow obfuscation transformation to a program. We conducted experiment to show that the proposed obfuscation strategy is useful for applying a control flow transformation to a program.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.2
• /
• pp.146-150
• /
• 1996

The waves are most important dynamical factors for the analyses of structural stability and topographical changes on coastal engineering field. However, wind-generated waves are very irregular in shape and transformed through refraction, diffraction and shoaling when they propagate into shallow water where bottom topography and water depth vary significantly. Recently, Vincent and Briggs (1989) reported hydraulic model experiments for the transformation of monochromatic and directionally-spread irregular waves passing over a submerged elliptical mound. They concluded that for the case of combined refraction-diffraction of waves by a shoal, the propagation characteristics of the irregular and equivalent regular wave conditions can be vastly different. On the irregular wave transformation have been made theoretical and numerical studies for several years. Although theoretical and laboratory studies on wave transformation have progressed considerably, field measurement and comparison of numerical results with related theories are still necessary for the prediction of the phenomena in reality. In this study, field measurement of both incident and transformed waves in Youngil Bay were made using various kinds of equipments, and numerical computations were made on the transformed frequency spectra of large waves propagating over the shoal using Chae and Jeong's (1992) elliptic model. It is shown that this model results agree very well with field data, and thus the applicability of the model is now validated.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.93-105
• /
• 2012

This paper compares the two- and three-dimensional (2D and 3D) approaches for the numerical determination of the equivalent mechanical properties of fractured rock masses. Both orthogonally-fractured model and discrete fracture networks (DFN) were used for the geometry and 2D models were cut in various directions from 3D model to compare their mechanical properties. Geological data were loosely based on the data available from Sellafield, UK. Analytical method based on compliance tensor transformation was used for investigation in orthogonally fractured rock and numerical experiments were conducted on fractured rock mass with DFN geometry. It is shown that 2D approach always overestimates the elastic modulus of fractured rock masses by a factor of up to around two because fractures are assumed to be perpendicular to the model plane in 2D problems. Poisson ratios tend to have larger values in 2D analysis while there is opposite trend in some sections. The study quantitatively demonstrates the limitation of the 2D approach that uses the simplified model from true 3D geometry.