• 한국수자원학회논문집
• /
• 제42권4호
• /
• pp.271-279
• /
• 2009

본 연구는 단순한 직사각형 하도에서 발생한 댐 붕괴 및 홍수전파 등에서 만족스러운 결과를 보였던 Riemann 근사해법을 이용한 1차원 유한체적기법을 불규칙한 하도형상의 자연하도에 적용하기 위하여 새로운 기법을 개발하는 것이 목적이다. 이를 위하여 자연하천 단면을 등가의 직사각형 단면으로 변환하는 개념을 도입하였으며, 그 결과, 운동량방정식이 수정되었다. 새롭게 개발된 기법을 정확해가 존재하는 삼각형 단면하도의 댐 붕괴 흐름에 적용하고 그 결과를 비교함으로써, 기법의 정확성 및 적용성이 검증되었다. 단면의 형상 및 단면간 거리가 균일하지 않는 자연하도에 적용한 결과는 실측수위와 비교하여 홍수파의 전파 양상, 도수의 발생 위치 및 크기, 그리고 전 구간에서의 최대 수위가 잘 일치함을 나타낸다. 본 연구결과로부터 기존의 균일한 단면을 사용하여 개발된 기법들을 복잡한 수치처리과정 없이 자연하천 단면에 직접 적용할 수 있을 것으로 판단된다.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.611-621
• /
• 2001

본 논문에서는 포토닉 밴드갭(PBG)의 결합모드(defect-mode)를 이용한 대역통과 여파기를 구현하는 방법에 대해 연구하였다. PBG 구조를 구현하기위하여 마이크로스트립 라인의폭을 달리하면 PBG 셀(cell)을 형성한 후, 이들 셀들을 주기적으로 배열하였으며, PBG 구조 일부분의 주기를 변화시킬 경우에 발생하는 결함모드를 이용하여 저지대역 내에서 통과대역을 구현하였다. 또한, 집중정수소자(Iumped-element)를 이용하여 PBG 구조의 등가회를 구현하였다.

• Steel and Composite Structures
• /
• 제50권3호
• /
• pp.265-280
• /
• 2024

The collapse behavior observed in single-story beam-column assembly (SSBCA) do not accurately represent the actual overall stress characteristic of multi-story frame structure (MSFS) under column loss scenario owing to ignoring the interaction action among different stories, leading to a disconnection between the anti-collapse behaviors of "components" and "overall structures", that is, the anti-collapse performance of frame structures with two different structural scales has not yet formed a combined force. This paper conducts a numerical and theoretical study to explore the difference of the collapse behaviors of the SSBCA and MSFS, and further to reveal the internal force relationships and boundary constraints at beam ends of models SSBCA and MSFS. Based on the previous experimental tests, the corresponding refined numerical simulation models were established and verified, and comparative analysis on the resistant-collapse performance was carried out, based on the validated modeling methods with considering the actual boundary constraints, and the results illustrates that the collapse behaviors of the SSBCA and MSFS is not a simple multiple relationship. Through numerical simulation and theoretical analysis, the development laws of internal force in each story beam under different boundary constraints was clarified, and the coupling relationship between the bending moment at the most unfavorable section and axial force in the composite beam of different stories of multi story frames with weld cover-plated flange connections was obtained. In addition, considering the effect of the yield performance of adjacent columns on the anti-collapse bearing capacities of the SSBCA and MSFS during the large deformation stages, the calculation formula for the equivalent axial stiffness at the beam ends of each story were provided.

• Structural Engineering and Mechanics
• /
• 제49권2호
• /
• pp.203-223
• /
• 2014

The extensive use of prestressed reinforced concrete (PSC) highway bridges in marine environment drastically increases the sensitivity to both fatigue-and corrosion-induced damage of their critical structural components during their service lives. Within this scenario, an integrated method that is capable of evaluating the fatigue reliability, identifying a condition-based maintenance, and predicting the remaining service life of its critical components is therefore needed. To accomplish this goal, a procedure for fatigue reliability prediction of PSC highway bridges is proposed in the present study. Vehicle-bridge coupling vibration analysis is performed for obtaining the equivalent moment ranges of critical section of bridges under typical fatigue truck models. Three-dimensional nonlinear mathematical models of fatigue trucks are simplified as an eleven-degree-of-freedom system. Road surface roughness is simulated as zero-mean stationary Gaussian random processes using the trigonometric series method. The time-dependent stress-concentration factors of reinforcing bars and prestressing tendons are accounted for more accurate stress ranges determination. The limit state functions are constructed according to the Miner's linear damage rule, the time-dependent S-N curves of prestressing tendons and the site-specific stress cycle prediction. The effectiveness of the methodology framework is demonstrated to a T-type simple supported multi-girder bridge for fatigue reliability evaluation.

• Structural Engineering and Mechanics
• /
• 제31권6호
• /
• pp.697-716
• /
• 2009

This paper summarizes an experimental and analytical study on the seismic behavior of high strength reinforced concrete columns under cyclic loading. In total six cantilever columns with different sizes and concrete compressive strengths were tested. Three columns, small size, had a $325{\times}325$ mm cross section and the three other columns, medium size, were $520{\times}520$ mm. Concrete compressive strength was 80, 130 and 180 MPa. All specimens were designed in accordance with the Japanese design guidelines. The tests demonstrated that, for specimens made of 180 MPa concrete compressive strength, spalling of cover concrete was very brittle followed by a significant decrease in strength. Curvature was much important for the small size than for the medium size columns. Concrete compressive strength had no effect on the curvature distribution for a drift varying between -2% and +2%. However, it had an effect on the drift corresponding to the peak moment and on the equivalent viscous damping variation. Simple equations are proposed for 1) evaluating the concrete Young's modulus for high strength concrete and for 2) evaluating the moment-drift envelope curves for the medium size columns knowing that of the small size columns. Experimental moment-drift and axial strain-drift histories were well predicted using a fiber model developed by the authors.

• Steel and Composite Structures
• /
• 제1권1호
• /
• pp.1-16
• /
• 2001

Due to aesthetic, economic, and structural performance, the use of structural hollow sections as columns in both continuous moment resisting and nominally pinned construction is attractive. Connecting the beams to these sections is somewhat problematic as there is no access to the interior of the section to allow for the tightening of a standard bolt. Therefore, bolts that may be tightened from one side, i.e., blind bolts, have been developed to facilitate the use of site bolting for this arrangement. This paper critically reviews available information concerning blind bolting technology, especially the performance of fasteners in shear, tension, and moment resisting connections. Also provided is an explanation of the way in which the results have been incorporated into design guidance covering the particular case of nominally pinned connections. For moment resisting connections, it is concluded that whilst the principle has been adequately demonstrated, sufficient data are currently not available to permit the provision of authoritative design guidance. In addition, inherent flexibilities in the connections mean that performance equivalent to full strength and rigid is unlikely to be achievable: a semicontinuous approach to frame design will therefore be necessary.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.271-276
• /
• 2004

In this paper. dynamic behavior of the cracked beam under a moving mass is presented using the finite element method (FEM). Model accuracy is improved with the following consideration: (1) FE model with Timoshenko beam element (2) Additional flexibility matrix due to crack presence (3) Interaction forces between the moving mass and supported beam. The Timoshenko bean model with a two-node finite element is constructed based on Guyan condensation that leads to the results of classical formulations. but in a simple and systematic manner. The cracked section is represented by local flexibility matrix connecting two unchanged beam segments and the crack as modeled a massless rotational spring. The inertia force due to the moving mass is also involved with gravity force equivalent to a moving load. The numerical tests for various mass levels. crack sizes. locations and boundary conditions were performed.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.423-431
• /
• 2013

k-factor법은 합성교량의 설계에서 부정정 응력을 산정하는 방법으로 널리 사용되고 있다. 이 방법의 적정성을 평가하기 위하여 2경간 연속 강합성거더에 대하여 등가하중법과 비교하였다. k-factor법은 크리프에 대해서는 강재응력을 과소평가하고, 부모멘트 구간에서는 응력의 방향을 반대로 산정하며, 건조수축이나 온도차에 대해서는 단면변화를 고려하지 못하는 것을 확인하였다. 이 논문에서는 k-factor법의 정확성을 개선하면서, 계산의 편리성은 유지할 수 있는 j-factor법을 제안하였고, 그 효과를 2경간 연속 강합성거더에 적용하여 검증하였다.

• 한국터널지하공간학회 논문집
• /
• 제8권2호
• /
• pp.151-163
• /
• 2006

대단면 터널에서 시공되는 사전보강공법에 의한 보강영역의 보강효과를 수치해석적으로 모델링하기 위한 다양한 방법이 제시되고 있지만 실무자들은 공학적인 방법보다는 경험적인 방법과 문헌을 참고하여 설계를 수행하고 있다. 따라서 본 연구에서는 상용 프로그램에서 직접적으로 적용할 수 있는 사전보강 영역의 물성치 결정에 있어서 거시적 접근법의 개념을 기반으로 미시적 접근법을 적용한 등가 물성치를 결정하는 기법을 제시하고 3차원 수치해석을 통한 실제모델 해석결과와 다른 여러 미시적 접근법들과의 비교 분석을 수행하여 타당한 보강영역 물성치 결정기법을 제시하였다. 해석 결과 구근과 강관의 병렬연결 강성이 원지반과 직렬로 연결되는 사전보강영역의 직병렬 강성 시스템과, 구근과 강관의 직렬 강성 시스템이 실해와 가장 근사한 변위를 예측하였으나 후자의 경우 그 모델링 과정이 복잡하므로 본 연구에서는 간편법으로써 직병렬 강성 시스템을 제안한다. 직병렬 강성 시스템은 천단변위에 대해 풍화암 지반에서는 약간 안전측으로, 내공변위와 지표면 변위에 대해서는 정밀모델의 결과와 거의 동일하게 거동하는 것으로 분석되었으며 풍화토와 풍화암 지반에서 동일한 변위 경향성을 나타낸다. 본 연구에서 제시된 사전보강영역의 직병렬 강성 시스템은 실제모델로 대표되는 보강지반의 거동 메카니즘을 효과적으로 나타내는 것으로 분석된다.

• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1167-1184
• /
• 2015

Despite considerable life casualty and financial loss resulting from past earthquakes, many existing steel buildings are still seismically vulnerable as they have no lateral resistance or at least need some sort of retrofitting. Passive control methods with decreasing seismic demand and increasing ductility reduce rate of vulnerability of structures against earthquakes. One of the most effective and practical passive control methods is to use a shear panel system working as a ductile fuse in the structure. The shear Panel System, SPS, is located vertically between apex of two chevron braces and the flange of the floor beam. Seismic energy is highly dissipated through shear yielding of shear panel web while other elements of the structure remain almost elastic. In this paper, lateral behavior and related benefits of this system with narrow-flange link beams is experimentally investigated in chevron braced simple steel frames. For this purpose, five specimens with IPE (narrow-flange I section) shear panels were examined. All of the specimens showed high ductility and dissipated almost all input energy imposed to the structure. For example, maximum SPS shear distortion of 0.128-0.156 rad, overall ductility of 5.3-7.2, response modification factor of 7.1-11.2, and finally maximum equivalent viscous damping ratio of 35.5-40.2% in the last loading cycle corresponding to an average damping ratio of 26.7-30.6% were obtained. It was also shown that the beam, columns and braces remained elastic as expected. Considering this fact, by just changing the probably damaged shear panel pieces after earthquake, the structure can still be continuously used as another benefit of this proposed retrofitting system without the need to change the floor beam.