1 |
ACI Committee 363 (2005), "High-strength concrete (ACI 363R)" by ACI Committee 363 – High-Strength Concrete, Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete, Special publication SP-228-5, Washington, D.C., USA
|
2 |
ACI (2002), "American concrete institute building code requirements for structural concrete (ACI 318-02) and commentary (ACI 318R-02)", Reported by ACI Committee 318
|
3 |
AIJ (1999), "Design guidelines for earthquake resistant reinforced concrete buildings based on inelastic concept", Architecture Institute of Japan
|
4 |
Bechtoula, H. (2005), "Seismic performance of moderate or low rise reinforced concrete frame buildings", PhD thesis, Department of Architecture and Architectural Engineering, Kyoto University, Japan
|
5 |
Bechtoula, H., Kono, S., Sakashita, M. and Watanabe, F. (2003), "Effect of number of cycles on damage progress for large scale columns under multiaxial loadings", Proc. Japan Concrete Institute, JCI, Kyoto, 25(2), 355-360
|
6 |
JICE (1988-1993), "New RC research development report (1988-1993)", Japan Institute of Construction Engineering
|
7 |
Kumagai, H., Tozawa, M. and Kurose, Y. (2005), "Compression failure in reinforced concrete shear wall with ultra-high-strength materials", Concrete Res. Technol., JCI, 16(3), 39
DOI
|
8 |
Kuramoto, H., Kabeyasawa, T. and Shen, F.H. (1995), "Influence of axial deformation on ductility of highstrength reinforced concrete columns under varying triaxial forces", ACI Struct. J., 92(5), 610-618
ScienceOn
|
9 |
Martinez, S., Nilson, A.H. and Slate, F.O. (1982), "Spirally reinforced high strength concrete column", Research Report .82-10, Department of Structural Engineering, Cornell University, Ithaca, August
|
10 |
Muguruma, H. and Watanabe, F. (1990), "Ductility improvement of high-strength concrete columns with lateral confinement", Proceeding of the Second International Symposium on Utilization of High-Strength Concrete, University of California, Berkeley, May 20-23
|
11 |
Namiki, S., Sawai, N., Kuroha, K. and Hara, T. (1999), "Application of high-strength concrete with 1000 kgf/cm2 to high-rise building", Concrete Journal, 37(3), 35-38
DOI
|
12 |
Nakamura, T. and Yokoo, Y. (1977), "Non-stationary hysteresis uniaxial stress-strain relations of wide flange steel: Part II-Empirical formulas", Transaction of the Architectural Institute of Japan, AIJ, 260, 71-82
DOI
|
13 |
Nishiyama, M. (1993), "Axial loading test on high strength concrete prisms confined by ordinary and high strength steel", Utilization of High Strength Concrete, Proceeding of High Strength Concrete Symposium, Norway, 322-329
|
14 |
Tomosawa, F. and Noguchi, T. (1995), "Relationship between compressive strength and modulus of elasticity of high strength concrete”, J. Struct. Constr. Eng., AIJ, 474, 1-10
|
15 |
Popovics, S. (1997), "A numerical approach to the complete stress-strain curve of concrete", Cement Concrete Res., 3(5), 583-599
DOI
ScienceOn
|
16 |
Sakino, K. and Sun, Y. (1194), "Stress-strain curve of concrete confined by rectilinear hops", J. Struct. Construct. Eng., AIJ, 461, 95-104
|
17 |
Shibata, A. and Sozen, M.A. (1976), "Substitute-structure method for seismic design in R/C", J. Struct. Div., ASCE, 102(ST1), 1-18
|