• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.519-520
• /
• 2011

In Gas Insulated Substation(GIS), Very Fast Transient Overvoltages(VFTOs) are generated by the switching operation of disconnector or circuit breaker and it is propagated to each component of GIS. Each component of GIS is modeled by lumped line model and distributed line model based on equivalent circuits. The various cases which can be operated and the various closing point-on-wave are considered. In this paper, magnitude and rate-of-rise of VFTO are simulated and analyzed by comparing the simulation results. Measurements are performed at transformer and circuit breaker.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.753-756
• /
• 2019

Orthorhombic dysprosium manganite DyMnO₃ with single phase is synthesized using solid-state reaction technique and the crystal structure and dielectric properties as functions of temperature and frequency are investigated. Thermally activated dielectric relaxations are shown in the temperature dependence of the complex permittivity, and the respective peaks are found to be shifted to higher temperatures as the measuring frequency increases. In Arrhenius plots, activation energies of 0.32 and 0.24 eV for the high- and low-temperature relaxations are observed, respectively. Analysis of the relationship between the real and imaginary parts of the permittivity and the frequencies allows us to explain the dielectric behavior of DyMnO₃ ceramics by the universal dielectric response model. A separation of the intrinsic grain and grain boundary properties is achieved using an equivalent circuit model. The dielectric responses of this circuit are discerned by impedance spectroscopy study. The determined grain and grain boundary effects in the orthorhombic DyMnO₃ ceramics are responsible for the observed high- and low-temperature relaxations in the dielectric properties.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.54-61
• /
• 1997

An accurate extraction technique is developed to determine full euqivalent circuit parameters of Si MOSFETs using 1 set of measured S-parametes without complicated optimization process. This technique is based on the use of anlytic Z-parameters experessions for resistances and inductances and the Y-parameter ones for ntrinsic parameters. This accuracy is proved over the wide range of gate voltage by observing good agreement between measured and fitted Z-parameter equations and frequency-independent response of the extracted intrinsic parameters. Using this technique, gate voltage-dependencies of model parameters are obained in the saturation region and these results show the similar behavior to the short-channel effects expected from the device theory.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.49-56
• /
• 2009

This paper shows the characteristic analysis of single-phase line start permanent magnet (LSPM) motors considering the overhang structure. To achieve the low-cost design of an LSPM motor, the overhang structure is adapted for the rotor with a constraint of a fixed magnet volume. To obtain the dynamic and steady performance of the motor, the circuit parameters are extracted using the 3D-static FEM(Finite Element Method) and the d-q equivalent circuit is used. The performance of the model with overhang is compared with the conventional model without overhang on the condition that both models have a fixed volume for the permanent magnet.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.56-61
• /
• 2000

The precise and reliable loss model for induction motor and converter system is very important in order to predict the efficiency performance of variable speed drives. This paper proposes an accurate loss model of induction motor and converter system. The motor losses, such as stator and rotor copper loss, core loss and stray loss, are considered for fundamental and harmonic frequencies. Also considered are the skin effect on rotor resistance, temperature effect on bath stator and rotor resistance, magnetizing inductance saturation, and friction and windage loss. All the above features are incorporated in a synchronous frame dynamic d-q equivalent circuit. The converter system, consisting of a diode rectifier and PWM transistor inverter, is modeled accurately for conduction and switching losses. Validity of the models, in both steady state and transient conditions, is verified by simulations.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.644-651
• /
• 2009

In this paper, the design results of a $22.5^{\circ}$ diode phase shifter for the RADANT lens and two $11.25^{\circ}$, $22.5^{\circ}$ dielectric phase shift layers for the diode phase shifter are presented. The amount of phase shift introduced by each dielectric layer depends on the thickness and the shape of the metal strip and the electrical property of the diode. The equivalent circuit model is employed to represent the dielectric phase shift layer, and the simulated result of the equival circuit model is compared with the result of the field simulation. The measured data of the fabricated $11.25^{\circ}$, $22.5^{\circ}$ dielectric phase shift layer shows about $2^{\circ}$ phase shift error.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.113-118
• /
• 2010

압전 변압기와 CCFL, 형광등의 전기적 등가회로에 의한 PSPICE 모델을 제시하였고, 차세대 35W급 초절전형 삼파장 T5 형광램프용 고효율 형광등 안정기를 개발하였다. 이 안정기는 역률개선회로와 인버터에 압전 변압기를 채용하여 T5 형광램프의 점등실험을 하였으며, 압전 변압기의 효율적인 구동과 정확한 주파수 공급을 위하여 PLL방식을 사용하였다.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.24-30
• /
• 2005

For a reciprocating compressor of household refrigerators, a direct analogy between the pipe flow network and the electric circuit network has been utilized to set up a mathematical model for oil supply system. Individual lubrication elements of the oil supply system, such as propeller- installed oil cap, oil galleries, radial oil feeding holes, spiral oil grooves, and various sliding surfaces have been analogized by equivalent electric elements, and these have been combined together to form an electric circuit corresponding to the whole oil supply system. By solving the closed network equations of the model, oil flow rates at various lubrication elements could be obtained. Total amount of the oil flow rate drawn into the shaft has been measured and compared reasonably well with the prediction of the numerical simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.630-633
• /
• 2001

This paper presents a PSPICE circuit model for the simulation of both static and dynamic characteristics of fluorescent lamps. The model can by utilized for an electric ballast simulation with continuous dimming and transient mode simulation such as step dimming Characteristics of a Rosen-type piezoelectric transformer were analyzed by combining an equivalent circuit with piezoelectric equations and the relation between the characteristics and the dimension of the PT was studied.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2085-2098
• /
• 2016

Laminated busbars with a low stray inductance are widely used in NPC three-level inverters, even though some of them have poor performances in heat equilibrium and overvoltage suppression. Therefore, a theoretical method is in need to establish an accurate mathematical model of laminated busbars and to calculate the impedance and stray inductance of each commutation loop to improve the heat equilibrium and overvoltage suppression performance. Firstly, an equivalent circuit of a NPC three-level inverter laminated busbar was built with an analysis of the commutation processes. Secondly, on the basis of a 3D (three dimensional) cubical thermal model and mirror circulation theory, a supersymmetric mirror circulation 3D cubical thermal model was built. Based on this, the laminated busbar was decomposed in 3D space to calculate the equivalent resistance and stray inductance in each commutation loop. Finally, the model and analysis results were put into a busbar design, simulation and experiments, whose results demonstrate the accuracy and feasibility of the proposed method.