• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1759-1768
• /
• 2018

The energy density, power density and ohm resistance of battery change significantly as results of battery aging, which lead to decrease in the accuracy of the equivalent model. A parameter identification method of the equivale6nt circuit model with 3 R-C branches based on the test database of battery life cycle is proposed in this paper. This database is built on the basis of experiments such as updating of available capacity, charging and discharging tests at different rates and relaxation characteristics tests. It can realize regular update and calibration of key parameters like SOH, so as to ensure the reliability of parameters identified. Taking SOH, SOC and T as independent variables, lookup table method is adopted to set initial value for the parameter matrix. Meanwhile, in order to ensure the validity of the model, the least square method based on variable forgetting factor is adopted for optimizing to complete the identification of equivalent model parameters. By comparing the simulation data with measured data for charging and discharging experiments of Li-ion battery, the effectiveness of the full life cycle database and the model are verified.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.41-48
• /
• 2003

In this paper, a new equivalent circuit for a defected ground structure(DGS) is proposed and adapted to design of a power amplifier for performance improvement. The DGS equivalent circuit presented in this paper consists of parallel LC resonator and parallel capacitance to describe the fringing fields due to the etched defects on the metallic ground plane, and also is used to optimize the matching circuit of a power amplifier. A previous research has also used a DGS for harmonic rejection and efficiency improvement of a power amplifier(1), however, there was no exact equivalent circuit analysis. In this paper, we suggest a novel design method and show the performance improvement of a class AB power amplifier by using the equivalent circuit of a DGS applied to output matching circuit. The design method presented in this paper can provide very accurate design results to satisfy the optimum load condition and the desirable harmonic rejection, simultaneously. As a design example, we have designed a 20W power amplifier with and without circuit simulation of DGS, and compared the measurement results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.4
• /
• pp.366-371
• /
• 1988

A parallel-plate waveguide with a slit in its upper plate is analysed. An integral equation is formulated for the equivalent magnetic current and solved by the conventional moment method. Numerical results are presented for the magnetic current, reflection and transmission coefficients, a normalized radiated power in the slit, and equivalent circuit parameters. The equivalent circuit parameters are an useful quantities in the study of the E-plane coupled microstrip antennas.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.22-24
• /
• 1997

The 4-pole LHSM was composed of the figure-of-eight shaped 3-phase armature windings. DC field windings, and the segmented secondary with the transverse bar track. The motor was designed on the base of the performance characteristic equations and the equivalent circuit model, with the coefficients of the magnetic shape. These coefficients were computed from the analytical expressions and examined from FEM analysis. The magnetic equivalent circuit of 3-D model of LHSM was obtained. and this concept provided the equivalent models for 2-D FEM analysis. Therefore, the airgap field, the lift and thrust force were calculated and compared with the results of magnetic equivalent circuit method.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.2
• /
• pp.127-132
• /
• 2002

In this paper, the new claw pole type linear stepping motor(CPLSM) is proposed. And the magnetic equivalent circuit of CPLSM is derived by the structure of the CPLSM. The design parameter and the magnetic flux density of CPLSM are performed with three-dimensional finite element method.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.55-57
• /
• 2005

This paper deals with the analysis of bearing current in H-bridge seven level multilevel inverter fed induction motor. In the previous researches utilized electromagnetic equations to derive the parasitic capacitance or measured capacitance parameters, but we used FEM to derive parasitic capacitances and defined the equivalent circuit parameters in our strategy. Then we compared suggested method with conventional method in 60 [Hz] no load condition.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.175-178
• /
• 1996

Power system is becomming more and more complex and large. So system is stressed increasingly. This paper presents a method to select contingency ranking in power systems for EMS operation. Firstly, the proposed method is applied line outage using Thevenin equivalent circuit. Secondly, Contingency harmful to system is selected by loss variation between base case and fault. Thirdly, this paper prescribed simulated line sequence. Therefore this algorithm shows higher computation speed and effective memory use.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2067-2070
• /
• 2005

This paper presents an approach to evaluate the appropriate parameters for Piezoelectric ceramic utilization by adopting Impedance Method. Butterworth Van Dyke model (BVD) is considered to use as an equivalent circuit of Piezoelectric ceramic in case of no load. The experimental results from this model will be compared with the results from a circular Piezoelectric ceramic with 4.8 cm. diameter and 3 mm. thickness. The Thickness Mode vibration measured by Impedance Analyzer model 4192A can be analyzed from 1Hz to 13MHz for calculating and analyzing parameters at resonance frequency and anti-resonance frequency. These parameters are evaluated to design the efficient circuit for Piezoelectric ceramic utilization to obtain the optimal efficiency.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.295-297
• /
• 2004

A double-role double through switch with defected ground structure (DGS) is Proposed. The equivalent circuit for the proposed switch structure is derived based on equivalent circuit of newly proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method The on/off operation of the proposed switch Is obtained by varying the capacitance in the ground metallic plane The experimental results show excellent insertion loss characteristic at on state and isolation characteristic at off state.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.164-171
• /
• 1996

We report the experimental resutls on AlGaAs/GaAs heterojunction bipolar transistors (HBTs) with carbon-doped base structure. To characterize the output power, load-pull mehtod was employed. By characterizing the devices with HP8510C, we extracted the small-signal equivalent circuit. The HBTs were fabricated employing wet mesa etching and lift-off process of ohmic metals. the implementation of polyimide into the fabriction process was accomplished to obtain the lower dielectric constant resultig in significant reduction of interconnect routing capacitance. The fabricated HBTs with an emitter area of 6${\times}14{\mu}m^{2}$ exhibited current gain of 45, BV$_{CEO}$ of 10V, cut-off frequency of 30GHz and power gain of 1 3dBm. To extract the small signal equivalent circuit, the de-embedded method was applied for parasitic parameters and the calculation of circuit equations for intrinsic parameters.