• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.231-236
• /
• 1994

Fluid inclusions have been studied in phenocryst quartz from the Cretaceous porphyritic granite. Three main types of fluid inclusion were found: liquid-rich inclusion (I type), gas-rich inclusion (II type) and solid-bearing inclusions (III-A, III-B). The solid-bearing inclusions (III-A, B) represent the earliest trapped fluids. They have salinities between 63 and 67.5 wt.% equivalent NaCl. These are high saline inclusions containing NaCl and KCl daughter crystals. Homogenization temperature inferred from the fluid inclusion study ranges from 620 to $700^{\circ}C$. Type I and II inclusions were observed within the same fracture. This cause for these differences in degree of filling is evidence of boiling. Salinities of type I and II inclusions range from 10.24 wt.% to 13.44 wt.%, from 8.4 wt.% to 11.48 wt.% NaCl equivalent, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.123-126
• /
• 2003

A high strength aluminum alloy bolt (A7050, T7 temper treatment) has been developed by the authors. The bolt has a small grain size in the whole area of the bolt because of the large equivalent strain followed by thermo-mechanical treatment. As the bolt made of A 7050 has a risk of stress corrosion cracking, each grain should be strengthened the grain inside than the grain boundary in order to improve the stress corrosion cracking resistance. It has been confirmed that the nano-indentation hardness at each grain inside increased with the increasing equivalent strain by thermo-mechanical treatment processing.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.09a
• /
• pp.9-16
• /
• 2000

Applicability of the cross shaped drain in a soft clay ground is examined using the laboratory discharge capacity test, column consolidation test and 3-D numerical flow analysis. The equivalent diameter of the tested drains is back-calculated from the laboratory experiment and compared with those calculated from the formula suggested in the literature. The effective range of the cross shaped drain about the discharge capacity and coefficient of permeability is analyzed. The results of numerical analysis show that the cross shaped drain which has a cross-sectional area twice of the band shaped drain can reduce the consolidation time by 30% from that for the band shaped drain in a soft clay ground that K is over 1${\times}$10$\^$-7/cm/sec

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1305-1307
• /
• 1999

dynamic analysis of power systems is required the information for building a transfer function of has the heavy calculation of high order matrices. Since generally the order of the state matrix is over the limit of commercial analysis programs such as MASS(Multi-Area Small Signal Stability) Program, it is necessary to develop dynamic equivalent systems with preserving essential properties of the original system. In this work, a procedurd to find an optimal location of FACTS controllers is presented. The procedure was applied to KEPCO system in the year of 2000. The results on a test system demonstrate the accuracy of dynamic equivalencing and verify the effect of FACTS controllers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.4
• /
• pp.15-21
• /
• 1977

In this paper, an analogical method for measuring the electrical characteristics of the silent discharge in the Na2CO3 electrolyte is proposed by using an electrical equivalent model which consist of charging and discharging circuits. The electrical equivalent model is constructed with the use of zener diode and capacitor, and the electrical characteristics can be obtained by the voltage and charge traces which appear a simple parallelogram on the oscilloscope. The area enclosed by the parallelogram could be considered of the energy input per cycle, and is independent of the applied voltage waveform but dependent on the maximum applied voltage.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.258-260
• /
• 1999

The Single Machine Equivalent(SIME) is a hybrid method resulting from the coupling of a time-domain program with the equal-area criterion. This paper presents the efficient filtering algorithm using improved SIME for Transient Stability Assessment. The main feature of the method is cascading contingency filtering. First contingency filtering is conducted by using the first-swing stability of equivalent One Machine Infinite Bus(OMIB) system. This stability is evaluated by checking its time trajectory. Selected cases through the first step are assessed on the second step using SIME under the detailed model of power systems. The efficiency of the algorithm is tested on PSS/E test system.

• Journal of Power System Engineering
• /
• v.14 no.3
• /
• pp.71-76
• /
• 2010

The safety block which prevents drop of laborers at high altitude was analyzed by finite element method. Elastic analysis was done by Ansys ver. 11.0. and tetrahedral meshing was used. As load applied more vertically at the fixed face of saw tooth, the stress concentration became smaller and the load distributed broader. When load worked at saw tooth and the shape was more straight to the direction of load, most stresses except principal stress became smaller. When the area of the load increased, principal stress and equivalent stress could be decreased simultaneously. A principal stress and other various stresses occurred in 3D shape, therefore revised model which has smaller equivalent stress than other models shows excellence on the stability and the credibility.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.2
• /
• pp.208-213
• /
• 2015

In this study, two models due to the configuration of caliper cylinder among the parts of automotive brake system are studied by structural and fatigue analysis. As the maximum equivalent stress at model 2 becomes 1.5 times lower than model 1, model 2 can endure load higher than model 1. In case of fatigue damage analysis on model 1 and 2, model 1 has the damage area more than model 2. Fatigue damage at model 1 happen more than model 2. These study results can be effectively utilized with the design on caliper cylinder by anticipating prevention against its damage and investigating durability.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.252-255
• /
• 2001

Modern power systems are very complex and to model them completly is impractical for electromgnetic transient studies. Therefore areas outside the immediate area of interest must be represented by some form of Frequency Dependent Network Equivalent (FDNE). In this paper a method for developing FDNE is presented and demonstrated. The FDNE is generated by Linearized Least Square fitting the frequency response of a z-domain formulation. The advantage of this approach is that a direct implementation occurs which dose not incur errors due to discretization inherent with implementing a fitting function in the s-domain. The developed FDNE is accurate and efficient.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.81-83
• /
• 2001

This paper introduces the improved analysis method for PMDC (Permanent Magnet DC) motors. The effect of field yoke is considered by equivalent area. Overhang effect, caused by different axial length of magnet and armature, is analyzed by 3D EMCN(Equivalent Magnet Circuit Network) method. Then brush contact resistance and mechanical loss extracted by experimental data are used in characteristic analysis. The validity of the proposed method is verified by the comparison of analysis results and experimental ones.