Browse > Article
http://dx.doi.org/10.7467/KSAE.2015.23.2.208

Durability Analysis on Fatigue of Caliper Cylinder  

Han, Moonsik (Department of Mechanical & Automotive Engineering, Keimyung University)
Cho, Jaeung (Department of Mechanical & Automotive Engineering, Kongju National University)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.23, no.2, 2015 , pp. 208-213 More about this Journal
Abstract
In this study, two models due to the configuration of caliper cylinder among the parts of automotive brake system are studied by structural and fatigue analysis. As the maximum equivalent stress at model 2 becomes 1.5 times lower than model 1, model 2 can endure load higher than model 1. In case of fatigue damage analysis on model 1 and 2, model 1 has the damage area more than model 2. Fatigue damage at model 1 happen more than model 2. These study results can be effectively utilized with the design on caliper cylinder by anticipating prevention against its damage and investigating durability.
Keywords
Caliper cylinder; von Mises equivalent stress; Total deformation; Nonuniform fatigue loads; Fatigue life; Fatigue damage;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 H. K. Choi and J. U. Cho, "Structural Analysis on the Fracture of Bonded Double Cantilever Beam Model," Journal of Korean Soc. of Mechanical Technology, Vol.14, No.4, 2012.
2 J. M. Kim, K. T. Lee and H. Y. Kim, "Numerical Modeling to Evaluate Reat Crashworthiness for Round Recliner of Automotive Seats," Transactions of KSAE, Vol.17, No.1, pp.64-71, 2009.   DOI
3 T. K. Lee and B. S. Kim, "The Structure of an Automotive Woofer Speaker," Journal of Korean Soc. of Mechanical Technology, Vol.14, No.2, pp.19-24, 2012.
4 J. Swanson, ANSYS 12.0, ANSYS Inc., USA, 2010.
5 Y. S. Lee, B. H. Jun and J. M. Oh, "A Study on the Design Optimization of Composite Cylindrical Shells with Vibration, Buckling Strength and Impact Strength Characteristics," Transactions of KSAE, Vol.5, No.4, pp.48-69, 1997.
6 J. S. Lee, "Design Parameters for Supporting Frame in a Twist screen," Journal of Korean Soc. of Mechanical Technology, Vol.15, No.2, pp.85-91, 2013.
7 H. Y. Kim, S. K. Lee and Y. J. Shin, "Analyses of Deployment Process and Sled Test for Designing Airbag Module," Transactions of KSAE, pp.118-128, 1998.
8 H. W. Rhee, "Fatigue Behavior Analysis of Welded Rod/Knuckle Assembly for Hydraulic Cylinder," Journal of the Korean Society of Manufacturing Process Engineers, Vol.12, No.4, pp.93-99, 2013.   DOI
9 M. S. Han and J. U. Cho, "Study on Fatigue Durability Analysis of Poclain Bucket," Journal of the Korean Society of Manufacturing Process Engineers, Vol.12, No.2, pp.8-13, 2013.