• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.143-150
• /
• 2021

The recent spread of novel and highly variant pathogenic viruses, including the coronavirus (SARS-CoV-2), has increased the demand for diagnostic testing for rapid confirmation. This has resulted in investigating the functional capability of each space, and preparing facility guidelines to secure the safety of medical technologists. During viral evaluations, there is a requirement of negative pressure facilities along with thread separation, during pre-treatment of samples and before nucleic acid amplification. Space composition therefore needs to be planned by considering unidirectional air flow. This classification of safety management facilities is designated as biosafety level 2, and personal protective equipment is placed accordingly. In case of handling dangerous materials, they need to be carried out of the biosafety cabinet, and sterilizers are required for suitable disposal of infectious agents. A common feature of domestic laboratories is maintenance of the sample pre-treatment space at a negative pressure of -2.5 Pa or less, and arranging separate pre-treatment and reagent preparation spaces during the test process. We believe that the data generated in this study is meaningful, and offers an efficient direction and detailed flow for separation of the inspection process and space functions. Moreover, this study introduces construction of the laboratory by applying the safety management standards.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.37-49
• /
• 2021

Micropiles are widely used in construction field to enhance bearing capacity and reduce settlement of existing foundation. It has various benefits such as low construction expense, simple installation process, and small construction equipment. Recently, new microple equipped with the base expansion structure at the end has been developed to improve the foundation bearing capacity. The improvement of load capacity can be conceptually achieved by expanding the base expansion structure when a load is applied to the micropile. However, the expansion mechanism of the base expansion structure and the improvement of load capacity of the micropile were not yet experimentally validated. Therefore, in this study, a series of centrifuge model tests was performed to evaluate the effect of the base expansion structure on the improvement of load capacity. Two types of soil, sand and weathered rock, were prepared and the loading tests were performed using the real micropile with the base expansion structure. During the tests, the earth pressures surrounding the base expansion structure were monitored. As a result, when a load of 30 kN was applied to the micropile, the increase in the ratio of the horizontal to vertical pressure increment (∆σ_h/∆σ_𝜈) ranged from 0.4 to 0.58 in sand and ∆σ_h/∆σ_𝜈 = 0.19 in weathered rock, respectively. Therefore, it can be concluded that the increase in the horizontal earth pressure adjacent to the base expansion structure will improve the bearing capacity of the micropile.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.3
• /
• pp.47-54
• /
• 2022

Purpose: This study presents the analysis on space usage of delivery departments in regional public hospitals. The results intention is to achieve improvement of the delivery environment for the mothers and newborns regarding exposure prevention and efficient infection control. The purpose of this study is to provide fundamental data for architectural plans and guidelines for the delivery department. Method: The investigation and analysis were based on research papers, legal systems, public medical statistical data, and the architectural floor plan drawing. For research, 20 regional public hospitals with an operating delivery room were excluded. Regarding data accessibility, 15 regional public hospitals were selected. Results: To overcome the increased vulnerability of the delivery department, the research results of basic data is provided for the establishment to address urgent needs and rapid response. Thus, the research results are as follows: Firstly, the delivery department needs to respond promptly according to the type of patients. For example, in a case of emergency surgery, a connected circulation plan with the related departments is needed. Secondly, for the environment of the delivery area, alleviating anxiety is imperative for pregnant patients and guardians, labor, childbirth, and recovery. Therefore, these needs must be addressed for treatment space and circulation. Lastly, the delivery department is classified into three areas for analysis: access area, treatment area, and support area. In most of the delivery departments of the 15 selected hospitals, there is no space for the access and support area except for the labor and delivery rooms in the treatment area. For the access area, a waiting area, changing room for pregnant women and guardians, and a storage space for contaminated linens are required for infection prevention, safety, and efficiency. For the treatment area, childbirth processes and circulation should have space reserved for labor, delivery, recovery, examination, and treatment. In preparation for an emergency during childbirth, emergency response measures and supporting space needs to be established. For the support area, circulation and rooms are to be designed for medical staff support, activity space, storage and transportation of equipment, and urgent medical treatment. Implications: Along with the low fertility rate and the decrease of medical institutions that operate delivery departments, for the purpose of establishing a public medical service system and a healthy medical environment for mothers and newborns, the researched information demonstrates basic data on space plan of delivery departments in regional public hospitals.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.10
• /
• pp.549-564
• /
• 2016

Due to high cost of domestic production structure, steep growth of China's manufacturing business, and increase in oversea's production, building integrated system to support user-centered product design system based on cognitive and affective information is required to restore development of domestic manufacturing business. This paper put purpose on analysing requirements of end users, especially on information equipment business which works as a major industry in manufacturing businesses, and planning system design direction, prior to constructing user-centered product design support system based on cognitive and affective information. Research was conducted to identify current manufacturing process, application data on manufacturing, availability of cognitive and affective information data and its method of use, and necessity of user-centered product design support system based on cognitive and affective information, by carrying out in-depth interview with 6 related manufacturing companies. Need for user's character information was deducted from the interview, especially cognitive and affective information which is demanding for small to medium manufacturing business to research on its own.

• The Korean Journal of Franchise Management
• /
• v.3 no.1
• /
• pp.92-110
• /
• 2012

Due to the social problems including recent economic crisis and unemployment rate increase, the demand of business foundation market has been increased and, in the meantime, on the basis of the business foundation support policy of the government including youth foundation support policy and Small & Medium Business Administration foundation planning, business foundation market has been showing steady growth trend. With this enlargement of foundation market, as the accompanied increase of franchise market is expected, it is considered that the importance of more realistic and concrete research about franchise market be larger than before. This study considered brand image, main office support, foundation cost, information search activity as the advanced variable of effect on brand selection and established the cause of effect on brand selection by improving the existing advanced research, and its result is as follows. First, according to foundation business kind, age, sex, yes or no of marriage, there is some difference III the thought about brand image and foundation possibility. Second, Second, the most important factor of franchise contract intention is economical specificity. It is difficult to consider brand image, franchise support and information search activity as the property having a big effect on preliminary founder, and it was shown that the cost for franchise management(Consistency with initial foundation cost and self-capital, promotion cost, management fund, facility/equipment reinvestment, etc.) is an important property. Specially, it was shown that consistency with initial foundation cost and self-capital is the most important factor for preliminary founder.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.1
• /
• pp.40-50
• /
• 2023

Quality control (QC) is an essential work for the successful construction project execution. Recently, robust application of ICT to the QC tasks leads to utilizing innovative technologies and equipment. However, overall planing of QC works needs to take place before applying new technologies to each and individual QC task. The objectives of this research involve developing a database and an algorithm that identifies QC tasks and related information upfront. In addition, the researchers developed a methodology to generate inspection tasks in conjunction with construction work tasks. The Korean Ministry of Land and Transportation provides standard supervision checklists. They were classified based on criteria of inspection items, methods, period and the scope. Reinforced concrete work was selected as a case study for validation of the method. This framework can function when planing construction tasks with any type of planning tools and innovative technologies. The researchers expect this framework may contribute to various construction projects when developing QC plans and tasks with applicable technologies.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

• Cartoon and Animation Studies
• /
• s.51
• /
• pp.293-319
• /
• 2018

Thanks to the advancement of the related technologies and equipment, today's video contents like movies, animations and soap operas are rapidly expanding their expressible cinematic imagination area. In order to fulfill the elevated visual expectations of audiences and realize exciting storytelling and fantastic world, the fusion of different techniques is actively used, and the reality for visual effects and image synthesis is increasing more and more. Accordingly, recent VFX-oriented movies using CG have a much more complicated production process than before. Therefore, the importance of Pre-visualization, aka Pre-vis is becoming bigger in the planning process for sophisticated design. Pre-vis means that the advance visualization for stories or directing ideas in the planning process before starting production of movies or animations. 3D animated Pre-visualization realizing directors' abstract and ambiguous ideas in 3 dimensional environment in advance is, as a powerful means for visual storytelling, briskly used focusing on the VFX film industry on which the present CG is broadly used, and the role of Pre-vis throughout productions has increased compared to the past. The studies, however, on the role and utility of Pre-vis are not enough. Therefore, this study was conducted on the role of Pre-vis used for present VFX movie productions using the examples of 3D animated Pre-visualization production in which the researcher of this study participated. In this study, the role of the Pre-vis that is subdivided presently, is divided into and 3D animatics and their each role is analyzed with the example images. Through this, the characteristics that Pre-vis should have are clarified and the concept of the advantages and utility led by the use of Pre-vis in productions is strengthened. The goal of this study is to induce active uses of Pre-vis throughout productions after forming consensus about the various roles of Pre-vis and their utility.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.627-635
• /
• 2017

Brachytherapy is generally performed in conjunction with external radiation therapy, and the treatment course is very complicated, which can lead to radiation accidents. In order to solve this problem, we designed the process map by applying the failure mode and effects analysis (FMEA) method to the Brachytherapy and scored the risk priority number (RPN) for each treatment course based on this process map. The process map consisted of five steps, Patient consulting", "Brachytherapy simulation", "CT simulation", "Brachytherapy treatment planning" and "Treatment". In order to calculate the RPN, doctor, medical physicist, dose planners, therapist, and nurse participated in the study and evaluated occurrence, severity, and lack of detectability at each detail step. Overall, the process map is preceded by a patient identification procedure at each treatment stage, which can be mistaken for another patient, and a different treatment plan may be established to cause a radiation accident. As a result of evaluating the RPN for the detailed steps based on the process map, overall "Patient consulting" and "Brachytherapy treatment planning" step were evaluated as high risk. The nurses showed a tendency to be different from each other, and the nurses had a risk of 55 points or more for all the procedures except "Treatment", and the "Brachytherapy simulation" step was the highest with 88.8 points. Since the treatment stage differs somewhat for each medical institution performing radiotherapy, it is thought that the risk management should be performed intensively by preparing the process map for each institution and calculating the risk RPN.

• Journal of Intelligence and Information Systems
• /
• v.18 no.1
• /
• pp.39-57
• /
• 2012

Recently, due to the introduction of high-tech equipment in interactive exhibits, many people's attention has been concentrated on Interactive exhibits that can double the exhibition effect through the interaction with the audience. In addition, it is also possible to measure a variety of audience reaction in the interactive exhibition. Among various audience reactions, this research uses the change of the facial features that can be collected in an interactive exhibition space. This research develops an artificial neural network-based prediction model to predict the response of the audience by measuring the change of the facial features when the audience is given stimulation from the non-excited state. To present the emotion state of the audience, this research uses a Valence-Arousal model. So, this research suggests an overall framework composed of the following six steps. The first step is a step of collecting data for modeling. The data was collected from people participated in the 2012 Seoul DMC Culture Open, and the collected data was used for the experiments. The second step extracts 64 facial features from the collected data and compensates the facial feature values. The third step generates independent and dependent variables of an artificial neural network model. The fourth step extracts the independent variable that affects the dependent variable using the statistical technique. The fifth step builds an artificial neural network model and performs a learning process using train set and test set. Finally the last sixth step is to validate the prediction performance of artificial neural network model using the validation data set. The proposed model is compared with statistical predictive model to see whether it had better performance or not. As a result, although the data set in this experiment had much noise, the proposed model showed better results when the model was compared with multiple regression analysis model. If the prediction model of audience reaction was used in the real exhibition, it will be able to provide countermeasures and services appropriate to the audience's reaction viewing the exhibits. Specifically, if the arousal of audience about Exhibits is low, Action to increase arousal of the audience will be taken. For instance, we recommend the audience another preferred contents or using a light or sound to focus on these exhibits. In other words, when planning future exhibitions, planning the exhibition to satisfy various audience preferences would be possible. And it is expected to foster a personalized environment to concentrate on the exhibits. But, the proposed model in this research still shows the low prediction accuracy. The cause is in some parts as follows : First, the data covers diverse visitors of real exhibitions, so it was difficult to control the optimized experimental environment. So, the collected data has much noise, and it would results a lower accuracy. In further research, the data collection will be conducted in a more optimized experimental environment. The further research to increase the accuracy of the predictions of the model will be conducted. Second, using changes of facial expression only is thought to be not enough to extract audience emotions. If facial expression is combined with other responses, such as the sound, audience behavior, it would result a better result.