• Parasites, Hosts and Diseases
• /
• 제54권1호
• /
• pp.113-118
• /
• 2016

Hydatidosis has become a real concern for health care institutions and animal rearers in Tunisia. The Tunisian endemicity is aggravated by the growing number of dogs and the difficulty of getting rid of contaminated viscera because of the lack of equipment in most slaughterhouses. Therefore, microscopic and molecular tools were applied to evaluate the role of slaughterhouses in canine infection and Echinococcus granulosus sensu lato (s. l.) egg dissemination. Exposure risk to E. granulosus s. l. eggs in urban and rural areas was explored in order to implant preventive and adapted control strategies. Microscopic examinations detected taeniid eggs in 152 amongst 553 fecal samples. The copro-PCR demonstrated that 138 of 152 taeniid samples analyzed were positive for E. granulosus s. l. DNA. PCR-RFLP demonstrated that all isolated samples belonged to E. granulosus sensu stricto (s. s.). An important environmental contamination index (25.0%) by E. granulosus s. l. eggs was demonstrated. The average contamination index from the regions around slaughterhouses (23.3%; 95% CI: 17.7-28.9%) was in the same range as detected in areas located far from slaughterhouses (26.0%, 95% CI: 21.3-30.8%). Echinococcosis endemic areas were extended in both rural (29.9%, 95% CI: 24.8-34.9%) and urban locations (18.1%, 95% CI: 13.0-22.9%). The pathogen dissemination is related neither to the presence/absence of slaughterhouses nor to the location in urban or rural areas, but is probably influenced by human activities (home slaughtering) and behavior towards the infected viscera.

• 한국산업보건학회지
• /
• 제24권4호
• /
• pp.492-500
• /
• 2014

Objectives: The purpose of this study is to estimate the applicability of regional sample collection of environmental samples. The concentration of asbestos fibers were analyzed with two devices. One was an existing commercial air sampling pump that has been proved to be accurate and exact, and the other is a remodeled pump for sample collection which was made from an electric bubble generator originally designed for aquarium fish. Samples were collected with the two devices under the same environmental conditions and collection equipment. A comparative analysis of the concentration of ambient asbestos fiber was then performed. Methods: Based on previous research, six farmhouses with asbestos fiber slate roofs known to have high concentrations of asbestos fiber were selected. Using the existing commercial air sampling pump and the remodeled electric bubble generator, four to seven samples were collected each day one meter downwind from the edge of the slate roof at high volume (about 4 L/min) and low volume (about 1.4 L/min). The analyzer responsible for sample quality control of asbestos fibers counted the number of asbestos fibers with a phase microscope. Results: The rates of flow change of the existed sampler and the remodeled pump at high volume were 0.82% and 0.17%, respectively. The rates of flow change at low volume were 3.83% and 1.09%, but there was not significant difference. The rates of flow change are within the error range (${\pm}5%$) of OSHA analyzing methods. For the high volume sampler, the average asbestos fiber concentration in the air collected by the existed sampler is 6.270 fibers/L and for the remodeled one 5.527 fibers/L, not a significant difference. For the low volume sampler, the average asbestos fiber concentration in the air collected by the existed sampler is 7.755 fibers/L and for the remodeled one 7.706 fibers/L, not a significant difference. The total area of the slate roof of the targeted farmhouse has an effect on the concentration of asbestos fibers in the air from the existing pump and the remodeled one (p<0.01). Conclusions: The sampling function between the existing commercial pump and the remodeled one shows little difference. Therefore, the remodeled pump is considered a pump with a good availability for collecting ambient air asbestos samples.

• 기술혁신학회지
• /
• 제16권4호
• /
• pp.954-977
• /
• 2013

이 연구는 소비자들이 사물지능통신(Machine-to-Machine: 이하 M2M) 기술을 활용한 가전제품을 구매 및 사용하고자 할 때, 어떠한 요인들이 그 제품을 선택하는 데 영향을 미치는지 고찰하였다. M2M 가사기술은 모바일 인터넷을 통해 가전제품과 가정 내 각종 시설을 원격제어하거나 전자동으로 작동시키는 새로운 정보통신기술로, 여성들의 가사노동 부담 해소와 사회 참여를 지지할 수 있는 기술이다. 이 논문은 이러한 점에 주목하여 성별, 소득 수준, 기혼여성의 취업 여부, 모바일 인터넷 기기의 보유 여부 등 4개의 독립변수가 소비자들의 M2M 가전제품의 구매 및 사용의사와 어떠한 상관관계에 있는지 분석하였다. 연구 결과 M2M 가전제품의 구매와 사용을 모두 결정할 수 있는 변수는 '스마트폰과 태블릿PC 등 모바일 인터넷 기기의 보유 여부'로 확인되었다. 이와 달리 기혼여성의 취업 여부는 구입의사에만 영향을 미쳤고 소득수준과 성별 요인은 거의 영향을 미치지 않았다. 이러한 결과는 '주부의 취업, 소득, 성별 변수에 의해 가사기술이 도입된다'는 기존 연구와 다른 새로운 성과이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.618-633
• /
• 2014

Relay technology is becoming more important for mobile communications and wireless internet of things (IoT) networking because of the extended access network coverage range and reliable quality of service (QoS) it can provide at low power consumption levels. Existing mobile multihop relay (MMR) technology uses fixed-point stationary relay stations (RSs) and a divided time-frame (or frequency-band) to support the relay operation. This approach has limitations when a local fixed-point stationary RS does not exist. In addition, since the time-frame (or frequency-band) channel resources are pre-divided for the relay operation, there is no way to achieve high channel utilization using intelligent opportunistic techniques. In this paper, a different approach is considered, where the use of mobile/IoT devices as RSs is considered. In applications that use mobile/IoT devices as relay systems, due to the very limited battery energy of a mobile/IoT device and unequal channel conditions to and from the RS, both minimum energy consumption and QoS support must be considered simultaneously in the selection and configuration of RSs. Therefore, in this paper, a mobile RS is selected and configured with the objective of minimizing power consumption while satisfying end-to-end data rate and bit error rate (BER) requirements. For the RS, both downlink (DL) to the destination system (DS) (i.e., IoT device or user equipment (UE)) and uplink (UL) to the base station (BS) need to be adaptively configured (using adaptive modulation and power control) to minimize power consumption while satisfying the end-to-end QoS constraints. This paper proposes a minimum transmission power consuming RS selection and configuration (MPRSC) scheme, where the RS uses cognitive radio (CR) sub-channels when communicating with the DS, and therefore the scheme is named MPRSC-CR. The proposed MPRSC-CR scheme is activated when a DS moves out of the BS's QoS supportive coverage range. In this case, data transmissions between the RS and BS use the assigned primary channel that the DS had been using, and data transmissions between the RS and DS use CR sub-channels. The simulation results demonstrate that the proposed MPRSC-CR scheme extends the coverage range of the BS and minimizes the power consumption of the RS through optimal selection and configuration of a RS.

• 드라이브 ㆍ 컨트롤
• /
• 제17권2호
• /
• pp.9-18
• /
• 2020

The purpose of this study was to analyze the effect of the soil cone index (CI) on the tractor work load. A load measurement system was constructed for measuring the field data. The field sites were divided into grids (3×3 m), and the cone index was measured at the center of each grid. The work load measured through the plow tillage was matched with the soil cone index. The matched data were grouped at 600 kPa intervals based on the cone index. The work load according to the cone index was analyzed for engine, axle, and traction load, respectively. The results showed that when the cone index increased, engine torque decreased by up to 9%, and the engine rotational speed and brake-specific fuel consumption increased by up to 5% and 3%, respectively. As the cone index increased, the traction and tillage depth were inversely proportional to the cone index, decreasing 7% and 18%, respectively and the traction and tillage depth were directly proportional to the cone index, increasing 13% and 12%, respectively. Thus, it was found that the cone index had a major influence on the engine, axle, and traction loads of the tractor.

• 한국융합학회논문지
• /
• 제8권1호
• /
• pp.51-59
• /
• 2017

본 연구는 종합병원 내 응급실에 설치된 CT 장비와 일반촬영장비에 대한 세균 오염도 검사를 실시하여 보건학적 융복합 감염관리에 대한 기초자료를 마련하고자 하였다. 연구는 2015년 12월 1일부터 12월 31일까지 수도권 3곳과 전라도 2곳, 충청도 2곳 등 총 7곳의 의료기관을 대상으로하였다. 영상의학과 응급실 내 CT장비의 검출된 표면 오염 균주는 Micrococcus species(4,5%), Stenotrophomonas maltophilia(9%), Enteococcus faecium(4.5%), Providencia stuartii(4.5), Gram negative bacilli(4.5%), 일반촬영장비에서 검출된 표면 오염 균주는 Providencia stuartii(11%), Klebsiella pneumonia(3.5%), Stenotrophomonas maltophilia(11%), Pantoea species(11%), Acinetobacter baumannii(3.5%), Micrococcus species(3.5%), Escherichia coli(3.5%), Enterobacter species(3.5%), Gram negative bacilli(11%) 로 병원 감염의 원인균으로 알려진 균주는 없었고, 특이성을 가진 균주 역시 없었지만 가장 많이 검출된 구역이 모두 환자와 밀접한 관련을 갖는 곳이므로 방사선사는 검사 전후 알코올 등으로 깨끗이 닦아내야 할 것이다.

• 국제초고층학회논문집
• /
• 제6권3호
• /
• pp.227-235
• /
• 2017

This paper describes some of the challenges for structural design of a mid-story seismic isolated high-rise building, which is located near Tokyo station, completed in 2015. The building is a mixed-use complex and encompasses three volumes: one substructure including basement and lower floors, and a pair of seismic isolated superstructures on the substructure. One is a 136.5m high Main Tower (office use), and the other is a 98.5 m high South Tower (hotel use). The seismic isolation systems are arranged in the $3^{rd}$ floor of the Main Tower and $5^{th}$ floor of the South Tower, so that we call this isolation system as the mid-story seismic isolation. The primary goal of the structural design of this building was to secure high seismic safety against the largest earthquake expected in Tokyo. We adopted optimal seismic isolation equipment simulated by dynamic analysis to minimize building damage. On the other hand, wind-induced vibration of a seismic isolated high-rise building tends to be excited. To reduce the vibration, the following strategies were adopted respectively. In the Main Tower with a large wind receiving area, we adopted a mechanism that locks oil dampers at the isolation level during strong wind. In the South Tower, two tuned mass dampers (TMDs) are installed at the top of the building to control the vibration. In addition, our paper will also report the building performance evaluated for wind and seismic observation after completion of the building. In 2016, an earthquake of seismic intensity 3 (JMA scale) occurred twice in Tokyo. The acceleration reduction rate of the seismic isolation level due to these earthquakes was approximately 30 to 60%. These are also verified by dynamic analysis using observed acceleration data. Also, in April 2016, a strong wind exceeding the speed of 25m/s occurred in Tokyo. On the basis of the record at the strong wind, we confirmed that the locking mechanism of oil damper worked as designed.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.1-12
• /
• 2020

This study was to develop a simulation model of a compound planetary gear reducer for the final driving shaft using a gear analysis software (KISSsoft, Version 2017, KISSsoft AG, Switzerland). The aim of this study is to analyze transmission error and the tooth load distribution through micro-geometry using the simulation model. The tip and root relief were modified with Micro-geometry in the profile direction, and crowning was modified with Micro-geometry in the lead direction. The transmission error was analyzed using the PPTE (Peak to Peak Transmission Error) value, and the tooth load distribution was analyzed for the concentrated stress on the tooth surface. As a result of modifying tip and relief in the profile direction, the transmission error was reduced up to 40.7%. In the case of modifying crowning in the lead direction, the tooth load was more evenly distributed than before and decreased the stress on the tooth surface. After modifying the profile direction for the 1st and 2nd planetary gear train, the bending and contact safety factors were increased by 31.7% and 17%, and 18.3% and 12.5% respectively. Moreover, the bending and safety factors after modifying lead direction were increased by 59.5% and 32.7%, respectively for the 1st planetary gear train, and 59.6% and 43.6%, respectively for the 2nd planetary gear train. In future studies, the optimal design of a compound planetary gear reducer for the final driving shaft is needed considering both the transmission error and tooth load distribution.

• Journal of Radiation Protection and Research
• /
• 제37권4호
• /
• pp.219-225
• /
• 2012

방사선안전을 수행하는 방사선안전관리자를 대상으로 실제적인 방사선안전규제 수준을 파악하여 합리적인 안전규제 제도를 마련하는데 필요한 근거자료를 도출함으로써 방사선안전규제의 효율성과 편의성을 극대화할 수 있는 차별화된 규제에 도움이 되고자 하였다. IAEA의 RS-G-1.9 (2005), NRC의 NUREG Vol. 1~21 등과 국내 원자력안전법의 내용을 근거로 전체 약 10%에 해당되는 방사선이용기관의 방사선안전관리자를 대상으로 설문조사하였다. 피폭관리에 대한 요건($3.32{\pm}0.910$)이 가장 높은 인식수준을 나타냈고, 관련 서류의 기록, 비치, 보관에 대한 요건($2.84{\pm}0.826$)은 가장 낮은 인식수준을 나타냈다. 방사선원 현황 및 관리 요건, 시설 요건, 측정 및 오염관리 요건, 측정 장비 및 감시기 작동 요건, 교육 및 훈련 요건, 피폭관리 요건에서 산업기관이 의료기관보다 규제가 더 엄격해야 한다는 인식수준을 나타냈다. 방사선안전규제 수준이 산업기관과 의료기관에 통계적으로 유의한 차이가 있다는 것은 규제관련 그 원인이 존재하는 것이므로 실제적인 규제내용을 재평가해 볼 필요가 있음을 시사한다. 향후 연구에서는 국내 기관특성별로 규제요건을 개발하는 과정이 이루어질 필요가 있고, 기관특성을 고려하여 방사선안전규제를 수행한다면 편의성을 극대화한 안전규제를 달성할 수 있을 것이라고 사료된다.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.283-291
• /
• 2011

본 연구는 건설공사 현장에 적용되고 있는 무선센서네트워크 관련 기술현황을 검토하고, USN 기반의 콘크리트 양생온도 관리방법에 대한 현장적용성 실험을 통하여 그 개선 방안을 도출하는데 목적이 있다. 건설분야에서의 USN 관련연구는 주로 공사의 품질관리 및 시설물 유지관리, 안전관리를 중심으로 이루어지고 있으나, 현장여건 및 통신네트워크 등 실용화를 위한 세부적인 연구가 필요한 것으로 나타났다. 또한 현장사무실에서의 실시간 원격모니터링에 의한 콘크리트의 온도관리가 콘크리트내 소형의 무선센서를 활용 하여 USN 환경에서도 가능한 것을 알 수 있었다. 다만, 센서의 매립깊이에 따른 전파인식정도나 내장건전지의 전력소모 및 전송방식 등 현장에서의 가변적 상황에 대응할 수 있는 보다 안정화된 다양한 시스템 구축을 위한 연구가 필요한 것으로 나타났다.