References
- J. H. Kim, J. K. Chung and H. K. Sung, "An investigation on development of the planetary gearheads for small precision mechanism", Proceedings of the KSME 2003 Spring Annual Meeting, pp.723-728, 2003.
- S. M. Yang, T. H. Kim and H. Y. Kang, "A Study on the design for dual differential planetary gear system to get high reduction ratio", Research of Engineering, Vol.24, pp.119-126, 1993.
- T. H. Kim et al., "Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car", Journal of the Korean Society of Manufacturing Process Engineers, Vol.14, No.6, pp.98-103, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.098
- S. Y. Noh et al., "Study on the Tooth Micro-Geometry Optimization of Planetary Gear for Drive Reducer", Journal of the Korean Society for Precision Engineering, Vol.34, No.6, pp.371-376, 2017. https://doi.org/10.7736/KSPE.2017.34.6.371
- H. T. Ryu, D. H. Lee and G. J. Cheon, "A Study on the Transmission Error of a Star Type Epicyclic Gear Train", Transactions of the Korean Society of Automotive Engineers, Vol.7, No.5, pp.206-212, 1999.
- J. S. Song et al., "Development of Gear Stiffness Module for Multi-Body Dynamic Analysis on Gears", Journal of Korean Society of Manufacturing Technology Engineers, Vol.21, No.1, pp.130-136, 2012. https://doi.org/10.7735/ksmte.2012.21.1.130
- M. S. Kim, J. S. Kim and D. H. Lim, "Gear design optimization for low noise slewing system of excavator", Proceedings of the KSNVE Annual Spring Conference, pp.733-736, 2016.
- I. B. Lee et al., "A Study on Tooth Micro-geometry Optimization of Planetary Gear for 5MW Wind Turbine Pitch Drive", Journal of the Korean Society of Manufacturing Process Engineers, Vol.13, No.1, pp.85-91, 2014. https://doi.org/10.14775/ksmpe.2014.13.1.085
- S. H. Park, I. B. Shin and S. C. Huh, "Design for Gear Failure Prevention by Micro Tooth Profile Modification", Journal of the Korean Society for Power System Engineering, Vol.23, No.1, pp.78-83, 2019. https://doi.org/10.9726/kspse.2019.23.1.078
- Y. J. Park et al., "Analysis of Load Distribution and Sharing on the Planetary Reducer for Wind Turbines", Journal of the Korean Society of Manufacturing Technology Engineers, Vol.20, No.6, pp.830-836, 2011.
- S. J. Hong et al., "Determination of safety factor for agricultural gear reducer using simulation software", Korean Journal of Agricultural Science, Vol.45, No.2, pp.283-289, 2018. https://doi.org/10.7744/KJOAS.20170064
- M. H. Bae, T. Y. Bae and D. J. Kim, "The Critical Speed Analysis of the Differential Planetary Gear Train of a Concrete Mixer Truck Mixer Reducer", Journal of Drive and Control, Vol.14, No.1, pp.1-7, 2017. https://doi.org/10.7839/ksfc.2017.14.1.001
- J. H. Jang et al., "Effects of PTO gear face width on safety factors", Korean Journal of Agricultural Science, Vol.43, No.4, pp.650-655, 2016. https://doi.org/10.7744/kjoas.20160068
- J. G. Kim et al., "Optimum Design of Pitch Reducer for Wind Turbine Using Genetic Algorithm", Transactions of the Korean Society of Mechanical Engineers A, Vol.38, No.2, pp.185-192, 2014. https://doi.org/10.3795/KSME-A.2014.38.2.185
- M. J. Song et al., "A Study on the Optimal Design of Drive Gear for Transfer Gearbox", Journal of the Korean Society for Precision Engineering, Vol.36, No.2, pp.121-126, 2019. https://doi.org/10.7736/KSPE.2019.36.2.121
- S. M. Kwon and D. I. Cha, "Tooth Root Bending Stress of Roller-Rack and Pinion System", Journal of the Korean Society of Manufacturing Technology Engineers, Vol.27, No.6, pp.492-498, 2018. https://doi.org/10.7735/ksmte.2018.27.6.492
- J. H. Lee, D. H. Lee and K. H. Lee, "Contact Stress Analysis of a Pair of Mating Spur Gears", Journal of the Korean Society of Manufacturing Process Engineers, Vol.9, No.4, pp.59-65, 2010.
- C. I. Park, "Vibration and Noise of Mechanical System", Journal of the KSME, Vol.53, No.2, pp.30-34, 2013.
- D. H. Lee, "Power Control of Parallel Hybrid Tractor using Working Cycle", Doctoral Dissertation, Sungkyunkwan University, 2014.
- S. U. Park, "Fatigue life evaluation of spiral bevel gear of transmission using agricultural workload of tractor", Doctoral Dissertation, Chungnam National University, 2019.
- Y. S. Choi, B. H. Lee and Y. H. Shin, "Nonlinear Dynamic Analysis of Gear Driving System due to Transmission Error and Backlash", Transactions of the Korean Society of Automotive Engineers, Vol.5, No.1, pp.69-78, 1997.
- K. J. Choi et al., "Experimental Study of the Dynamic Characteristics of Rubber Mounts for Agricultural Tractor Cabin", Journal of Biosystems Engineering, Vol.43, No.4, pp.255-262, 2018. https://doi.org/10.5307/JBE.2018.43.4.255
- KS B ISO, Calculation of Load Capacity of Spur and Helical Gears, International Organization for Standardization, ISO 6336-(1:6), 2015.
- KISSsoft, User Manual, KISSsoft AG, 2017.
- S. J. Hong et al., "Performance Evaluation of a Driving Power Transmission System for 50 kW Narrow Tractors", Journal of Biosystems Engineering, Vol.43, No.1, pp.1-13, 2018. https://doi.org/10.5307/JBE.2018.43.1.001
- T. H. Eom and C. H. Lee, "Minimization of Shifting Shock of Tractor PST using SimulationX", Journal of Drive and Control, Vol.15, No.3, pp.36-42, 2018. https://doi.org/10.7839/KSFC.2018.15.3.036
- T. J. Kim et al., "Strength analysis of mechanical transmission using equivalent torque of plow tillage of an 82 kW-class tractor", Korean Journal of Agricultural Science, Vol.46, No.4, pp.723-735, 2019.
- W. J. Chung et al., "Analytical Study on Improvement in Load Sharing for Planetary Gear Set using Floating Ring Gear", Journal of Biosystems Engineering, Vol.43, No.4, pp.263-272, 2018. https://doi.org/10.5307/JBE.2018.43.4.263
- W. S. Kim et al., "Work load analysis for determination of the reduction gear ratio for a 78 kW all wheel drive electric tractor design", Korean Journal of Agricultural Science, Vol.46, No.3, pp.613-627, 2019. https://doi.org/10.7744/KJOAS.20190047
- W. S. Kim et al., "Evaluation of PTO Severeness for 78 kW-Class Tractor According to Disk Plow Tillage and Rotary Tillage", Journal of Drive and Control, Vol.16, No.4, pp.23-31, 2019. https://doi.org/10.7839/KSFC.2019.16.4.023