• 한국자기학회지
• /
• 제21권6호
• /
• pp.214-218
• /
• 2011

본 연구에서는 DC 마그네트론 스퍼터링을 이용해 MgO 단결정 기판 위에 성장된 Ag/CoFeB 박막의 스퍼터링 조건에 따른 박막 미세구조의 변화를 연구하였다. Ag 박막의 결정성 및 표면 거칠기는 인가전력(sputtering power) 및 증착온도의 변화에 따라 증착온도가 증가하는 경우 (200) 방향의 결정성이 향상되는 것을 확인하였으며, 인가전력이 증가되는 경우 표면 거칠기가 감소하는 것을 확인하였다. 또한 고분해능 TEM(transmission electron microscopy) 및 XRR(X-ray reflectivity) 측정을 통해 MgO 기판 위 Ag층의 켜쌓기 성장 및 MgO 기판과 Ag층 사이에 산화층에 해당하는 계면층이 존재하는 것을 알 수 있었으며, 증착온도의 증가에 따른 Ag의 섬상구조 형성 및 intermixing 효과에 의한 Ag/CoFeB 계면층의 변화 및 자기적 특성의 변화를 연구하였다.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.368-370
• /
• 1999

Using DC faced target sputtering method we grow AIN the films on the $Al_2O_3$(0001) substrate with varying thickness(17$\AA$-1000$\AA$). We measured x-ray diffraction(XRD) profiles by synchrotron radiation($\lambda$=1.12839 $\AA$) with four circle diffractometer. The full width half maximum(FWHM) of rocking curve for the AIN (0002) diffraction of the film grown at $500^{\circ}C$ was $0.029^{\circ}$. Also, we confirmed that the stress between AIN thin film and $Al_2O_3$(0001) substrate was reduced as increasing AIN film thickness, and the critical thickness of 400~500 $\AA$, defined as a lattice constant in the film agrees with that in a bulk without stress, was obtained.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.108-113
• /
• 2016

III-V compound semiconductor based thin film solar cells promise relatively higher power conversion efficiencies and better device reliability. In general, the thin film III-V solar cells are fabricated by an epitaxial lift-off process, which requires an $Al_xGa_{1-x}As$ ($x{\geq}0.8$) sacrificial layer and an inverted solar cell structure. However, the device performance of the inversely grown solar cell could be degraded due to the different internal diffusion conditions. In this study, InGaP/GaAs double-junction solar cells are inversely grown by MOCVD on GaAs (100) substrates. The thickness of the GaAs base layer is reduced to minimize the thermal budget during the growth. A wide band gap p-AlGaAs/n-InGaP tunnel junction structure is employed to connect the two subcells with minimal electrical loss. The solar cell structures are transferred on to thin metal films formed by Au electroplating. An AlAs layer with a thickness of 20 nm is used as a sacrificial layer, which is removed by a HF:Acetone (1:1) solution during the epitaxial lift-off process. As a result, the flexible InGaP/GaAs solar cell was fabricated successfully with an efficiency of 27.79% under AM1.5G illumination. The efficiency was kept at almost the same value after bending tests of 1,000 cycles with a radius of curvature of 10 mm.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.139-144
• /
• 1999

Hydrogen concentration depth profiles in homoepitaxial Si(001) films grown from hyper-thermal Si beams generated by ultrahigh vacuum (UHV) ion-beam sputtering have been measured by nuclear reaction analyses as a function of film growth temperature and deposition rate. Bulk H concentrations CH in the crystalline Si layers were found tio be below detection limits, 1${\times}$1019cm-3, with no indication of significant H surface segregation at the crystalline/amorphous interface region. This is quite different than the case for growth by molecular-beam epitaxy (MBE) where strong surface segregation was observed for similar deposition conditions with average CH values of 1${\times}$1020cm-3 in the amorphous overlayer. The markedly decreased H concentrations in the present experiments are due primarily to hydrogen desorption by incident hyperthermal Si atoms. Reduced H surface coverages during growth combined with collisionally-induced filling of interisland trenches and enhanced interlayer mass transport provide an increase in critical epitaxial thicknesses by up to an order of magnitude over previous MBE results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.281-283
• /
• 2001

$Bi_{2}Sr_{2}CuO_{x}$(Bi-2201) thin films were fabricated by atomic layer-by-layer deposition using an ion bearn sputtering method. 10 wt% and 90 wt% ozone mixed with oxygen were used with ultraviolet light irradiation to assist oxidation. At early stages of the atomic layer by layer deposition. two dimensional epitaxial growth which covers the substrate surface would be suppressed by the stress and strain caused by the lattice misfit. then three dimensional growth takes place. Since Cu element is the most difficult to oxidize. only Sr and Bi react with each other predominantly. and forms a buffer layer on the substrate in an amorphous-like structure. which is changed to $SrBi_{2}O_{4}$ by in-situ anneal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.306-306
• /
• 2011

Three dimensional(3D) topological insulators(TIs) of Bi binary alloys are characterized by a bulk energy gap with strong spin-orbit coupling and metallic surface states protected by time-reversal symmetry. It was reported that film forms of such materials were advantageous over bulk forms due to less defect density and better crystallinity. So far, the films have been prepared on several substrates including semiconductors and graphene. But, there were no studies on metal substrates. For electronic transport experiments and device applications, it is necessary to know epitaxial relation between TIs and metal electrodes. In this study, Atomically flat films of Bi2Se3 were grown on a Au(111) metal substrate by in-situ molecular beam epitaxy. Using home-built scanning tunneling microscope, we observed hexagonal atomic structures which corresponded to the outmost selenium atomic layer of Bi2Se3. Triangular-shaped defects known as Selenium vacancy were also found.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.163-168
• /
• 1997

Most of heteroepitaxial $\beta$-SiC thin films have been successfully grown on Si(100) adapting a carburizing process, by which a few atomic layers of substrate surface is chemically converted to very thin SiC layer using hydrocarbon gas sources. Using an organo-silicon precursor, bis-trimethylsilymethane (BTMSM, [$C_7H_{20}Si_2$]), heteropitaxial $\beta$-SiC thin films were successfully grown directy on Si substrate without a carburized buffer layer. The defect density of the $\beta$-SiC thin films deposited without a carburized layer was as low as that of $\beta$-SiC films deposited on carburized buffer layer. In addition, void density was also reduced by the formation of self-buffer layer using BTMSM instead of carburized buffer layer. It seems to be mainly due to the characteristic bonding structure of BTMSM, in which Si-C was bonded alternately and tetrahedrally (SiC$_4$).

• 한국결정학회지
• /
• 제4권2호
• /
• pp.92-99
• /
• 1993

Diethylzinc를 사용하여 PECVD장치로 ZnO 박막을 증 착하여 미세구조를 분석하였다. 기판 온도 100℃에서부터 이미 미세 결정 입자로 구성된 ZnO 박막의 증착이 가능했으며, 200℃이상에서는 C 축 배향성이 뛰어난 ZnO 박막이 유리 기판위에 증착되었다. c-면 사파이어 기판위에 증착된 ZnO 박막을 TEM으로 분석한 결과 기판 온도 350℃에서 EPITAXIAL (002) ZnO 박막이 성장됐으며, 입계에서는 Moire패턴에 의한 dislocation이 관찰되었다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.17-17
• /
• 2002

Time-of-flight impact collision ion scattering spectroscopy (TOF-ICISS) was applied to study the geometrical structure of the epitaxially grown BaTiO₃ layers on the MgO(100) surface. Hetero-epitaxial BaTiO₃ layers can be deposited by the following steps: first thermal evaporation of titanium onto the MgO(100) surface in the atmosphere of oxygen at 400℃, secondly thermal evaporation of barium in the same manner, and finally annealing at 800℃. Well ordered perovskite BaTiO₃ was confirmed from the ICISS spectra and reflection high electron energy diffraction (RHEED) patterns. It was also revealed that BaTiO₃ had cubic structure with the same lattice parameter of bulk phase.

• 한국결정성장학회지
• /
• 제10권5호
• /
• pp.350-355
• /
• 2000

수평 Bridgeman방식으로 성장된 C축 방향의 사파이어 결정기판을 연마 가공하였으며, 또한 유기금속 기상화학 증착 방법으로 사파이어 기판 위에 GaN 박막을 증착하였다. 사파이어 인고트를 성장하여 2인치 사파이어 기판으로 이용하였으며 웨이퍼 절편장치 및 연마장치를 개발하였다. 이러한 다단계의 연마 가공은 기판 표면을 경면화하였다. 표면 평탄도 및 조도는 원자힘현미경으로 측정하였다. 개발된 사파이어 기판위에 성장된 GaN 박막의 특성 및 청색광소자로의 응용 가능성을 확인하였다.