Si(001)을 기판으로 한 GaN 박막을 성장하기 위하여 hot wall epitaxy(HWE) 장치를 자체 제작하였다. HWE 장치를 이용하여 Si(001) 기판 위에 GaN 박막에 대한 상온에서의 광 발광(PL) 측정에서 GaN 초기층 성장온도가 $700^{\circ}C$ 보다 낮은 온도 조건에서 성장된 GaN 박막이 Zinc blende 구조와 Wurzite 구조가 혼합되어 성장되어지는 것으로 추측되며, $700^{\circ}C$ 이상의 온도에서는 성장된 GaN 박막이 주로 wurtzite 구조로 성장된다는 것을 알 수 있다. 그리고 x-선 회절 측정으로부터 성장한 GaN 박막이 Zinc blende와 Wurtzite의 두가지 구조가 혼합된 형태로 성장되었다는 것을 알 수 있었다. GaN 박막을 성장하기 위한 조건에서 초기층 성장조건은 증발부의 온도 $860^{\circ}C$와 기판부의 온도가 $720^{\circ}C$ 근처에서 4분동안 성장하였을 때 Wurtzite의 특성을 보이며, GaN 박막의 성장조건은 기판부의 온도 $1020^{\circ}C$, 증발부의 온도 $910^{\circ}C$에서 그리고 Ammonia gas의 유량을 120 sccm으로 하였을 때 보다 안정한 Wurtzite 구조특성을 보이게 되었다.
An epitaxial GaN layer was grown on a cone-shape-patterned sapphire substrate (PSS) (Sample A) and an AlN-buffered PSS (Sample B) with two growth steps under the same process conditions by employing the hydride vapor phase epitaxy (HVPE) method. We have investigated the characteristics of the GaN layer grown on two kinds of substrates at each growth step. The cross-sectional SEM image of the GaN layer grown on the two types of substrates showed growth states of GaN layers formed during the 1st and 2nd growth steps with different growth durations. Dislocation density was obtained by calculation using the FWHM value of the rocking curve for (002) and (102). Sample A showed 2.62+08E and 6.66+08E and sample B exhibited 5.74+07E and 1.65+08E for two different planes. The red shift was observed is photoluminescence (PL) analysis and Raman spectroscopy results. GaN layers grown on AlN-buffered PSS exhibited better optical and crystallographic properties than GaN layers grown on PSS.
본 연구에서는 마그네트론 스퍼터링 법으로 제작한 Ni-Fe/NiO 이층 박에서, NiO 증착 중 Ar 압력에 따른 교환이 방성의 변화를 고찰하엿으며 이를 미세조작과 관련시켜 해석하고자 하였다. 낮은 Ar 압력에서 증착한 Ni-Fe/NiO 이층막은 우수한 교환이방성 특성을 나타내었으나 Ar 압력이 증가함에 따라 교환이방성은 급격하게 감소하였다. 낮은 Ar 압력에서 증착한 시편은 NiO와 Ni-Fe 계면에서 epitaxy 경향을 나타내었으며 그 계면은 평범하고 그 경계는 두렷하게 구분하였다. 그러나 높은 Ar 압력에서 증착한 시편은 NiO와 Ni-Fe의 경계가 뚜렷하게 구분되지 않고 그 계면 또한 평활하지 않았다. 한편 NiO의 조성은 Ar압력의 증가에 따라 산소의 조성이 점점 증가하였다.
Passivation quality is mainly governed by epitaxial growth of crystalline silicon wafer surface. Void-rich intrinsic a-Si:H interfacial layer could offer higher resistivity of the c-Si surface and hence a better device efficiency as well. To reduce the resistivity of the contact area, a modification of void-rich intrinsic layer of a-Si:H towards more ordered state with a higher density is adopted by adapting its thickness and reducing its series resistance significantly, but it slightly decreases passivation quality. Higher resistance is not dominated by asymmetric effects like different band offsets for electrons or holes. In this study, multilayer of intrinsic a-Si:H layers were used. The first one with a void-rich was a-Si:H(I1) and the next one a-SiOx:H(I2) were used, where a-SiOx:H(I2) had relatively larger band gap of ~2.07 eV than that of a-Si:H (I1). Using a-SiOx:H as I2 layer was expected to increase transparency, which could lead to an easy carrier transport. Also, higher implied voltage than the conventional structure was expected. This means that the a-SiOx:H could be a promising material for a high-quality passivation of c-Si. In addition, the i-a-SiOx:H microstructure can help the carrier transportation through tunneling and thermal emission.
a-Si is commonly considered as a primary candidate for the formation of passivation layer in heterojunction (HIT) solar cells. However, there are some problems when using this material such as significant losses due to recombination and parasitic absorption. To reduce these problems, a wide bandgap material is needed. A wide bandgap has a positive influence on effective transmittance, reduction of the parasitic absorption, and prevention of unnecessary epitaxial growth. In this paper, the adoption of a-SiOx:H as the intrinsic layer was discussed. To increase lifetime and conductivity, oxygen concentration control is crucial because it is correlated with the thickness, bonding defect, interface density (Dit), and band offset. A thick oxygen-rich layer causes the lifetime and the implied open-circuit voltage to drop. Furthermore the thicker the layer gets, the more free hydrogen atoms are etched in thin films, which worsens the passivation quality and the efficiency of solar cells. Previous studies revealed that the lifetime and the implied voltage decreased when the a-SiOx thickness went beyond around 9 nm. In addition to this, oxygen acted as a defect in the intrinsic layer. The Dit increased up to an oxygen rate on the order of 8%. Beyond 8%, the Dit was constant. By controlling the oxygen concentration properly and achieving a thin layer, high-efficiency HIT solar cells can be fabricated.
β-Ga2O3는 4.9 eV의 넓은 밴드갭과 8 MV/cm의 높은 항복전압으로 전력 소자 응용 분야에서 많은 관심을 받고 있는 대표적인 UWBG(Ultra-wide Band-gap) 반도체이다. 또한 용액 성장이 가능하기 때문에 SiC, GaN에 비해 성장 속도가 빠르고 생산 비용이 저렴하다는 장점이 있다[1,2]. 본 연구에서는 EFG(Edge-defined Film-fed Growth) 법을 통해 Si 도핑 된 β-Ga2O3 단결정을 성장시키는 데에 성공하였다. 성장 방향과 성장 주 면은 각각 [010] / (001)로 설정하였으며 성장속도는 7~20 mm/h이다. 성장시킨 β-Ga2O3 단결정은 다양한 결정 면 방향(001, 100, ${\bar{2}}01$)과 off-angle(1o, 3o, 4o)에 따라 절단하여 표면 가공을 진행하였고, 가공 후 HVPE(Halide vapor phase epitaxy) 법을 이용해 epi-ready 기판 위에 homoepitaxial 층을 성장시켰다. 가공 후의 샘플과 epi-layer를 성장시킨 샘플을 XRD, AFM, OM, Etching 등의 분석을 통해 결정면과 off-angle에 따른 표면 특성을 비교하였다.
고농도로 붕소가 도핑된 실리콘층 내에 존재하는 부정합 전위는 웨이퍼 가장자리에서 발생됨을 알았으며, 이 층을 도핑되지 않은 영역으로 둘러쌓음으로써 부정합 전위가 억제된 고농도로 붕소가 도핑된 실리콘층을 형성할 수 있었다. 이를 이용하여 부정합 전위가 없는 고농도로 붕소가 도핑된 실리콘 멤브레인을 제작하였으며, 이 멤브레인의 표면 거칠기 및 파괴 강도 그리고 잔류 인장 응력을 각각 20$\AA$ 1.39${\times}10^{10}dyn/cm^{2}$ 그리고 2.7${\times}10^{9}dyn/cm^{2}$로 측정되었다. 반면에 부정합 전위를 포함하는 기존 멤브레인은 각각 500$\AA$ 8.27${\times}10^{9}dyn/cm^{2}$ 그리고 9.3${\times}10^{8}dyn/cm^{2}$로 측정되었으며, 두 멤브레인의 이러한 차이는 부정합 전위에서 기인함을 알았다. 측정된 두 멤브레인의 Young's 모듈러스는 1.45${\times}10^{12}dyn/cm^{2}$로 동일하게 나타났다. 또, 도핑 농도 1.3${\times}10^{12}dyn/cm^{3}$에 대한 고농도로 붕소가 도핑된 실리콘의 유효 격자 상수 및 기존 멤브레인의 평면적 격자 상수 그리고 기존 멤브레인 내의 부정합 전위의 밀도는 각각 5.424$\AA$ 5.426$\AA$ 그리고 2.3${\times}10^{4}$/cm 로 추출되었으며, 붕소가 도핑된 실리콘의 부정합 계수는 1.04${\times}10^{23}$/atom으로 추출되었다. 한편 별도의 추가적인 공정없이 일반적인 에피 성장법을 사용하여 고농도로 붕소가 도핑된 실리콘층 위에 부정합 전위가 없는 에피 실리콘을 성장시켰으며, 이 에피 실리콘의 결정성은 매우 양호한 것으로 밝혀졌다. 또 부정합 전위가 없는 에피 실리콘에 n+/p 게이트 다이오드를 제작하고 그 전압-전류 특성을 측정한 결과 5V의 역 바이어스에서 0.6nA/$cm^{2}$의 작은 누설 전류값을 나타내었다.
GaN-based light-emitting diodes (LEDs) are attracting great interest as candidates for next-generation solid-state lighting, because of their long lifetime, small size, high efficacy, and low energy consumption. However, for general illumination applications, the external quantum efficiency of LEDs, determined by the internal quantum efficiency (IQE) and the light extraction efficiency, must be further increased. The IQE is determined by crystal quality and epitaxial layer structure and high value of IQE more than 70% for blue LEDs have been already reported. However, there is much room for improvement of light extraction efficiency because most of the generated photons from active layer remain inside LEDs by total internal reflection at the interface of semiconductor with air due to the high refractive index difference between LEDs epilayer (for GaN, n=2.5) and air (n=1). The light confining in LEDs will be reabsorbed by the metal electrode or active layer, reducing the efficacy of LEDs. Here, we present the first demonstration of enhanced light extraction by forming a MgO nano-pyramids structure on the surface of vertical-LEDs. The MgO nano-pyramids structure was successfully fabricated at room temperature using conventional electron-beam evaporation without any additional process. The nano-sized pyramids of MgO are formed on the surface during growth due to anisotropic characteristics between (111) and (200) plane of MgO. The ZnO layer with quarter-wavelength in thickness is inserted between GaN and MgO layers to increase the critical angle for total internal reflection, because the refractive index of ZnO (n=1.94) could be matched between GaN (n=2.5) and MgO (n=1.73). The MgO nano-pyramids structure and ZnO refractive-index modulation layer enhanced the light extraction efficiency ofV-LEDs with by 49%, comparing with the V-LEDs with a flat n-GaN surface. The angular-dependent emission intensity shows the enhanced light extraction through the side walls of V-LEDs as well as through the top surface of the n-GaN, because of the increase in critical angle for total internal reflection as well as light scattering at the MgO nano-pyramids surface.
본 연구에서는 CoFeB/MgO/CoFeB 구조를 가지는 자기터널접합에서 capping층 재료의 종류와 열처리 시간에 따른 비정질 top CoFeB 자성층의 결정화 상태 및 자기터널접합의 자기적 특성 변화에 대한 연구결과를 비교 분석 하였다. Hcp(Hexagonal close-packed)의 결정구조를 가지는 Ru(002)를 capping층 재료로 사용한 자기터널접합 박막의 경우에는 열처리 이후 Ru과 인접한 부분의 top CoFeB이 bcc-CoFe(110)로 성장하는 반면, TiAl과 ZrAl을 capping층 재료로 사용한 자기터널접합의 경우는 열처리 이후 top CoFeB이 MgO와 epitaxial하게 bcc-CoFe(002)로 결정성장 하였다. 이로 인해 Ru을 사용한 자기터널접합의 터널자기 저항비(46.7%)보다 약 1.5배 높은 터널자기저항비(TiAl: 71.8%, ZrAl: 72.7%)를 나타내었다.
Recently, a patterned sapphire substrate (PSS) has been intensively used as one of the effective ways to reduce the dislocation density for the III-nitride epitaxial layers aiming for the application of high-performance, especially high-brightness, light-emitting diodes (LEDs). In this paper, we analyze the growth kinetics of the atoms and crystalline quality for the undopped-GaN depending on the facets of the pattern fabricated on a sapphire substrate. The effects of the PSS on the device characteristics of InGaN/GaN LEDs were also investigated. Several GaN samples were grown on the PSS under the different growth conditions. And the undoped-GaN layer was grown on a planar sapphire substrate as a reference. For the (002) plane of the undoped-GaN layer, as an example, the line-width broadening of the x-ray diffraction (XRD) spectrum on a planar sapphire substrate is 216.0 arcsec which is significantly narrower than that of 277.2 arcsec for the PSS. However, the line-width broadening for the (102) plane on the planar sapphire substrate (363.6 arcsec) is larger than that for the PSS (309.6 arcsec). Even though the growth parameters such as growth temperature, growth time, and pressure were systematically changed, this kind of trend in the line-width broadening of XRD spectrum was similar. The emission wavelength of the undoped-GaN layer on the PSS was red-shifted by 5.7 nm from that of the conventional LEDs (364.1 nm) under the same growth conditions. In addition, the intensity for the GaN layer on the PSS was three times larger than that of the planar case. The spatial variation in the emission wavelength of the undoped-GaN layer on the PSS was statistically ${\pm}0.5\;nm$ obtained from the photoluminescence mapping results throughout the whole wafer. These results will be discussed in terms of the mixed dislocation depending on the facets and the period of the patterns.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.