• 환경위생공학
• /
• 제22권1호
• /
• pp.37-47
• /
• 2007

In order to improve the Quality of fermented soybean Doenjang was investigated. The samples were prepared and fermented by the koji made with A. oryzae, B. subtilis and B. natto strains, that the product added green tea powder with sanitary canned food. 1. The water content of sample was 50.30-42.14%, pH value 6.03-5.52 and total acidity, 3.01-3.87. 2. The reducing sugar content for samples was 9.35-7.81%, Amino-N, 7.96-9.21%. 3. In the sensory evaluation test, the good sensory qualify that was S-2 sample than to S-1 and S-3. 4. The heavy metals analyzed from sample cans, tin, iron and lead content were 27.31-29.04 ppm, 5.32-5.91 ppm and trace amount.

• 환경위생공학
• /
• 제17권3호
• /
• pp.14-20
• /
• 2002

In order to improve the quality and sensory evaluation of Fermented Soybean(Chungkugjang meju) were investigated. The samples were prepared and fermented by the inoculation of Bacillus strains (B. subtilis, number 1, B. natto, number 2) that the product made With sanitary canned food. 1. The water content of samples was 46.75~50.60%, pH 5.35~6.95 and total acidity 3.26~3.62. 2. The reducing sugar of content for sample was 9.49~10.05%, Amino-N, 67~396mg% and the activity of protease was 0.36~1.49unit/g. 3. The heavy metals analyzed from sample cans, iron, tin and lead content of sample were 5.32~5.84ppm, 27.31~29.04ppm and 0.019~0.021ppm. 4. Therefore, results that Chungkugjang-meju manufactured from B. natto starter induced better product Quality and sensory test than that of the B. subtilis strain.

• 환경생물
• /
• 제22권3호
• /
• pp.376-380
• /
• 2004

In August 2003, the water quality of offshore waters along the Incheon coast of Korea was evaluated by biological evaluation using gametes, embryos and early development systems of a starfish species (Asterina pectinifera). As the result of performing biological evaluations on seawater samples from a total thirteen sites, the formation rate of normal larva was 16-68%. At seawater sample from site 5 and 13, formation rate of normal larva averaged 16%, the most abnormal rate hindering the early embryo development of the experimental animal, while that of site 3 averaged 68%, the highest formation rate of normal larva. At seawater sample from site 2, 4, 7, 9, 10, 11, 12, formation rate of normal larva averaged 33-54%, those which damage the development of early embryos slightly. At seawater sample from site 1, 5, 6, 8, 13, formation rate of normal larva averaged 16-28%, those which damage the development of early embryos strongly.

• Structural Engineering and Mechanics
• /
• 제76권2호
• /
• pp.153-162
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the shear tests and numerical studies were carried out. The effects of the differences in mechanical properties of different materials and the normal stress on shear properties of contact zone composite samples were analyzed from a macro-meso level. The results show that the composite samples have high shear strength, and the interface of different materials has strong adhesion. The differences in mechanical properties of materials weakens the shear strength and increase the shear brittleness of the sample, while normal stress will inhibit these effect. Under low/high normal stress, the sample show two failure modes, at the meso-damage level: elastic-shearing-frictional sliding and elastic-extrusion wear. This is mainly controlled by the contact and friction state of the material after damage. The secondary failure of undulating structure under normal-shear stress is the nature of extrusion wear, which is positively correlated to the normal stress and the degree of difference in mechanical properties of different materials. The increase of the mechanical difference of the sample will enhance the shear brittleness under lower normal stress and the shear interaction under higher normal stress.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1505-1515
• /
• 2009

A new method to semicontinuously determine $PM_{2.5}$ ionic species with a short time resolution is described in detail. In this system, a particle collection section (mixing part, particle collection chamber, and air/liquid separator) was developed. A Y-type connector was used to mix steam and an air sample. The particle collection chamber was constructed in the form of a helix coil and was cooled by a water circulation system. Particle size growth occurred due to the high relative humidity and water absorbed particles were efficiently collected in it. Liquid samples were drained out with a short residence time (0.08-0.1 s). The air/liquid separator was also newly designed to operate efficiently when the flow rate of the air sample was 16.7 L $min^{-1}$. For better performance, the system was optimized for particle collection efficiency with various types of test aerosols such as ($NH_4)_2SO_4,\;NaCl,\;NH_4HSO_4,\;and\;NH_4NO_3$. The particle collection efficiencies were almost 100% at different concentration levels in the range over 500 nm in diameter but 50-90% in the range of 50-500 nm under the following experimental conditions: 15 coil turns, a water flow rate for steam generation of 0.65 mL $min^{-1}$, and an air sample flow rate of 16.7 L $min^{-1}$. Finally, for atmospheric applications, chemical compositions of $PM_{2.5}$ were determined with a time resolution of 20 min on January 11-24, 2006 in Seoul, Korea, and the chemical characteristics of $PM_{2.5}$ ions were investigated.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.571-582
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the uniaxial compression tests and numerical studies were carried out. The interaction forms and formation mechanisms at the contact interfaces of different materials were analyzed to reveal the effect of interaction on the mechanical behavior of composite samples. The research demonstrated that there are three types of interactions between the two materials at the contact interface: constraint parallel to the interface, squeezing perpendicular to the interface, and shear stress on the interface. The interaction is mainly affected by the differences in Poisson's ratio and elastic modulus of the two materials, stronger interface adhesion, and larger interface inclination. The interaction weakens the strength and stiffness of the composite sample, and the magnitude of weakening is positively correlated with the degree of difference in the mechanical properties of the materials. The tensile-shear stress derived from the interaction results in the axial tensile fracture perpendicular to the interface and the interfacial shear facture. Tensile cracks in stronger material will propagation into the weaker material through the bonded interface. The larger inclination angle of the interface enhances the effect of composite tensile/shear failure on the overall sample.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.336-342
• /
• 2019

Introduction: An unexpected death was reported in a beginner immediately after starting the work at a plating factory. After the incident, air sampling was performed using a simulation of the situation as it had been at the time. Methods: To evaluate the airborne concentration of hydrogen cyanide, a total of six samples were collected: one personal sample, three area samples, and two background samples (office and outdoors). Hydrogen cyanide measurement was performed according to the standard sampling protocol recommended by the U.S. NIOSH (National Institute of Occupational Safety and Health). Results: The highest concentration of hydrogen cyanide was 0.938 ppm measured in a sample collected from the plating bath area with local exhaust ventilation. This value was approximately 20% of the ceiling occupational exposure limit. The personal sample showed a concentration of 0.135 ppm. Samples collected near the bath in which the incident occurred and a dehydrator showed hydrogen cyanide concentrations of 0.236 ppm and 0.101 ppm, respectively. Hydrogen cyanide was not detected in the background samples (office and outdoors). Conclusions: It is necessary to use proper ventilation systems and respirators in plating factories to prevent acute poisoning. Furthermore, it is important to educate and train new workers dealing with toxic substances.

• 한국산업보건학회지
• /
• 제19권2호
• /
• pp.81-87
• /
• 2009

Final purpose of this study was designed to develop the quality control(QC) sample for proficiency analytical testing of asbestos. This study consisted of two parts; first, development of manufacturing apparatus and sample preparing procedure for asbestos quality control(QC) sample: second, validation of the QC samples made by our developed method as asbestos proficiency analytical testing sample. The main results of the first part research are as followed We developed the apparatus for manufacturing the asbestos QC sample, consisted of filter hold, filter holder manifolder, vacuum system, and vacuum pump. The most proper filter of making the QC samples was a cellulose ester membrane filter with 25 mm diameter, pore size 0.8 um. And we presented the optimal procedure for preparing the asbestos QC sample by using the developed apparatus. We will verify the manufactured asbestos QC samples by this method, and present the validation results to confirm the reliability as a asbestos QC sample in next paper.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.185-186
• /
• 2005

• 환경위생공학
• /
• 제15권2호
• /
• pp.18-26
• /
• 2000

In order to improve the quality of Kamju(sikhae), Korean traditional sweat fermentated rice drink, Kamju made with laboratory fermenting from both covered barley malt and that added to commercial $\alpha-amylase$ and commercial sikhae can were investigated and analyzed ad follows 1. The amylase activities in L-malt(laboraory made malt), C-malt(commercial malt) were 25,065 units, 20,498 units at $60^{\circ}C$ and when heating at $60^{\circ}C$ for one hour their heat stability was getting lower and while at $70^{\circ}C$ after 2 hours both their heat stability was under 21%. 2. The external appearance, of all samples, in beating test, flipper, springer and leaker test were excellent and good valued. On the open test of sample can, head space was 7.9~9.0mm, net weight 247~250g, 432~435g, pH 4.96-5.76, Brix 13.2~14.0 and vacuum degree was 29~35cmHg. 3. The sucrose content of sample 1~5 was 8,57~10.01% highest ammount than sample 6(0.91%) 7(0.43%) and maltose content of sample 1~5 was 0.65~1.41% lower than 6 was 7.91% and 7 was 8,36%. The good traditional flavor texture and saccharides components content of glucose of sample 1~5 was 1.09~1.51, 6(3.86%), 7(3.97%), fructose content of sample 1~5 was 0.45~0.95%, 6(2.76%), 7(2.81%), maltotriose and raffinose of sample 1~5 were 0.04~0.291, 6(0.61%), 7(2.81%), and solid content of sample 1~5(3.1~3.8) was lower than 6(10.25%), 7(10.09%). 4. The result of sensory test as measured as lemone yellow of sample 6 and milky of sample 7, and weetness, flavor, color, traditional texture and sensory value for sample 1~5(3.1~3.8) was lower degree than that for 6(4.5), 7(4.0). 5. Among the heavy metals analyzed from sample cans, tin, iron and lead content for sample 1~5 were 31.95~36.71ppm, 5.84~6.39ppm and 0.075~0.09ppm while their content of sample 6.7, tin, 32.91ppm, 32.87ppm, iron 5.51ppm, 5.41ppm and lead, 0.074ppm, 0.079ppm.