• 제목/요약/키워드: Environmental load

검색결과 3,402건 처리시간 0.032초

자갈층에 근입된 대구경 현장타설말뚝의 지지능력 확인을 위한 양방향 재하시험 적용사례 (A Case Study on Application of Bi-directional Pile Load Test for verifing the Bearing Capacity of a Large-diameter Drilled Shaft Pile)

  • 이민희;정성민;김상일;최용규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.506-513
    • /
    • 2006
  • In this study, multi-level hi-direction pile load tests for drilled shaft pile socketed into the gravel were performed. The lower and upper hi-direction load test assemblies were located on tip of pile and 15m above the tip of pile. Based on the results of pile load test, it was analyzed bearing capacity of gravel, skin firction of upper soils and skin friction of lower soils. It was confirmed that drilled shaft socketed into the gravel had enough bearing capacity.

  • PDF

시간 개념을 고려한 전과정평가 방법 (Life Cycle Assessment Considering Time)

  • ;박정건;이건모
    • 대한환경공학회지
    • /
    • 제29권6호
    • /
    • pp.722-727
    • /
    • 2007
  • 전과정평가(Life Cycle Assessment; LCA)는 전과정에 걸친 투입과 산출을 정량화하고, 잠재적인 환경 영향을 평가하는 도구이다. 기존 LCA 방법은 시간을 명확하게 고려하지 않는다는 결함이 있다. 또한 정규화(normalization)단계에서도 시간 경계에 관한 문제가 존재한다. 본 연구의 목적은 시간이 고려된 새로운 LCA 방법을 제안하는 것이다. 본 연구에서 제안하는 새로운 LCA 방법론인 '시간-부하 LCA'는 각각의 전과정단계에서 발생하는 환경 부하를 해당 전과정단계에서 소요되는 시간으로 나누는 것이다. 전과정평가에서 시간 고려를 명확히 함으로써 제품 시스템의 환경 영향에 대한 새로운 관점을 제공할 수 있을 뿐만 아니라 정규화 단계의 시간 단위 불일치를 보완할 수 있다. 시간-부하 LCA의 기본 전제는 같은 양의 환경 부하라 하더라도 짧은 시간 동안 발생하는 환경부하가 긴 시간 동안 발생하는 환경 영향보다 더 튼 환경 영향을 미칠 수 있다는 것이다. 그러므로 목록 파라미터가 환경에 미치는 영향을 평가할 때 시간 당 부하를 고려할 필요가 있다.

조밀한 사질토지반에서 경사로 설치된 그룹 마이크로파일의 인발지지력 평가방법 (Evaluation Method for Uplift Load-carrying Capacity of Inclined Group Micropiles in Dense Sand)

  • 경두현;김가람;김인철;이준환
    • 한국지반공학회논문집
    • /
    • 제33권1호
    • /
    • pp.67-77
    • /
    • 2017
  • 본 연구에서는 단일 마이크로파일의 인발재하시험과 그룹 마이크로파일 인발재하시험 결과를 토대로 마이크로파일의 설치각도와 설치간격에 따른 인발지지특성을 확인하였다. 또한 FHWA(2005)의 방법과 Madhav(1987)의 방법을 토대로 지지력평가방법을 제안하고, 시험결과와 비교하여 그 적정성을 검토하였다. 시험결과, 단일 및 그룹마이크로파일의 인발지지력이 설치각도 30도까지 증가하는 것으로 나타났으며, 설치간격이 증가함에 따라 그 값이 다소 증가되는 것으로 나타났다. 제안된 FHWA(2005)의 방법의 경우, 수정된 방법을 통한 예측 값이 설치각도 15도의 5D조건까지 유사한 것으로 나타났다. 반면, 제안된 Madhav(1987)의 방법의 경우에는 모든 설치조건에서의 측정값과 수정된 방법을 통한 예측 값이 비교적 유사한 것으로 나타났다.

부하지속곡선(LDC)을 이용한 영산강 · 탐진강수계 오염총량관리 목표수질 평가방법 적용 방안 (Application of the Load Duration Curve (LDC) to Evaluate the Rate of Achievement of Target Water Quality in the Youngsan · Tamjin River Watersheds)

  • 정은정;김홍태;김용석;신동석
    • 한국물환경학회지
    • /
    • 제32권4호
    • /
    • pp.349-356
    • /
    • 2016
  • Total Maximum Daily Loads (TMDLs) System has been used to improve water quality in the Youngsan·Tamjin river basin since 2004. The Basic Policy of TMDLs sets up the standard flow based on the average dry condition or mid-range flow during the last 10 years. However, Target Water Quality (TWQ) assessment on TMDLs has been used to evaluate water quality through eight-day intervals over 36 times a year. The results for allocation evaluation and target water quality evaluation were different from each other in the same unit watershed during the first period. In order to improve the evaluation method, researchers applied Load Duration Curve (LDC) to evaluate water quality in nine unit watersheds of the Youngsan·Tamjin river basin. The results showed that achievement rates of TWQ assessment with the current method and LDC were 67~100% and 78~100%, respectively. Approximately 11% of the achievement rates with use of LDC were higher than those with use of the current method. In conclusion, it is necessary to review the application of the LDC method in all Four Major River Watersheds.

NATM 터널 유지보수를 위한 환경부하 산정모델 개발 (Development of Environmental Load Estimating Model for Maintaining NATM Tunnel)

  • 김다애;김상태;김경수;이주현
    • 한국건설관리학회논문집
    • /
    • 제19권6호
    • /
    • pp.86-93
    • /
    • 2018
  • 인간이 절대적으로 필요한 사회기반시설은 설치 및 유지관리 시 큰 환경부하를 발생한다. 특히, 유지관리는 장기간에 걸쳐 수행되며 보수방법 및 주기에 따라 환경부하가 달라지기 때문에 신뢰할 수 있는 추정 값을 제시하는데 한계가 있다. 이에 본 연구에서는 터널을 유지관리 할 때 발생하는 환경부하를 기획 또는 설계초기단계에서 신속하게 평가할 수 있도록 환경부하 추정모델을 개발하였다. 간략한 설계 자료만으로도 환경부하를 추정할 수 있는 모델개발을 위하여, 유지관리 단계에서의 환경부하 산정 방법론을 분석하고, 장기적인 유지관리의 특성을 고려한 보수주기와 보수율을 적용하였다. 최종적으로 모든 사용자들이 유지관리단계의 환경부하량을 편리하고 신속하게 추정할 수 있는 평가모델을 개발하는 것이 본 연구의 목표이며, 이를 통해서 도로 및 터널사업의 친환경적인 유지관리에 도움을 줄 수 있을 것으로 판단된다.

점오염원과 비점오염원 부하량 정량화를 위한 수질 유량 모니터링 개선 (Improvement of Water Quality and Streamflow Monitoring to Quantify Point and Nonpoint Source Pollutant Loads)

  • 장주형;이형진;김현구;박지형;김지호;류덕희
    • 한국물환경학회지
    • /
    • 제26권5호
    • /
    • pp.860-870
    • /
    • 2010
  • Long term monthly monitoring data showed that the water quality of streams flowing into Lake Paldang has been improved by various strategy for water. However, the effect of quality on Lake Paldang is still insufficient because of nonpoint source from watershed. In order to evaluate quantifying methods for pollution source and make a suggestion on improvements, Storm Water Management Model (SWMM) was constructed by using data set from the water quality and streamflow monitoring network in the Kyoungan watershed for Total Maximum Daily Loads (TMDLs). Load duration curve (LDC) based on the result of the Kyoungan watershed SWMM indicated that the water quality criterion on $BOD_5$ was often exceeded in up-stream than down-stream. From flowrate-load correlation curve, SS load significantly increased as streamflow increases. 75.3% of streamflow and 62.1% of $BOD_5$ loads is discharged especially in the zone of high flows, but monitoring data set didn't provide proper information about the conditions and the patterns associated with storm events. Therefore, it is necessary to acquire representative data set for comparing hydrograph and pollutograph through monitoring experimental watershed and to establish methods for quantifying point and nonpoint source pollutant loads.

시료 중 잔류 항생제 분석 방법: IV. EPA method 1694와 비교 가능한 기기 분석 방법 (Determination of Veterinary Antibiotic Residues: IV. Comparable Analytical Methods with EPA Methods 1694_A Review)

  • 김찬식;류홍덕;정유진;김용석;류덕희
    • 한국물환경학회지
    • /
    • 제32권6호
    • /
    • pp.670-699
    • /
    • 2016
  • In this study, 16 antibiotics were selected from among the top 30 veterinary antibiotics sold in South Korea in 2014, as well as from among the pharmaceuticals targeted by EPA method 1694, in order to review analytical methods for the detection of trace levels of antibiotics in environmental samples: surface water, soils, animal origin foods, and manures. LC-MS/MS was heavily used. In the chromatography for the detection of the selected antibiotics, the $C_{18}$ column was mostly used at the temperature of $30{\sim}40^{\circ}C$. Water and methanol/acetonitrile were commonly chosen as a nonpolar and a polar mobile phase, respectively. Gradient elution was applied to separate multiclass antibiotics. Volatile additives, such as formic acid, acetic acid, and ammonium acetate were mixed with the mobile phase to improve the ionization efficiency of analytes and the sensitivity in MS detection. Electrospray ionization (ESI) was widely used in the LC-MS/MS and positive ionization was preferred to determine the selected antibiotics. A protonated $[M+H]^+$ molecule was selected as a precursor ion, and its two transitions were analyzed, one for quantitative measurement and the other for confirmation. This study reviewed linearity of the calibration curve, recovery, repeatability, method detection limits (MDLs), and method quantification limits (MQLs) for each target compound used to validate the developed analytical methods.

시료 중 잔류 항생제 분석 방법: II. 액상 시료 전처리 방법 (Determination of Antibiotic Residues: II. Extraction and Clean-up Methods for Liquid Samples_A Review)

  • 김찬식;류홍덕;정유진;김용석;류덕희
    • 한국물환경학회지
    • /
    • 제32권6호
    • /
    • pp.628-648
    • /
    • 2016
  • Increased attention has been paid to the presence of veterinary antibiotics in various environmental matrices due to their toxicological behavior in the ecosystem and development of antibiotic-resistant strains of pathogenic bacteria. In the this review, 37 target antimicrobials were selected based on annual sales of antibiotics for livestock in South Korea 2014. Also, extraction and clean-up methods for the determination of the antibiotic residues in liquid samples including water, milk, and honey were comprehensively reviewed in the literature. Solid-phase extraction (SPE) was commonly used as a pre-treatment method for the samples. Most of the analytes were extracted in acidic conditions (2.5~4.0) except for aminoglycosides, which were extracted in neutral conditions (7.0~8.0). ${\beta}-Lactams$ showed the highest recoveries in neutral pH due to their degradation characteristics in acidic media. Starta-X, Oasis HLB, and Oasis MCX were frequently applied as an SPE cartridge and Oasis HLB showed the highest recoveries for the majority of antibiotic classes. The homogenized honey and milk were extracted by mixing with acids for deproteinization. Solids and other interfering substances in the extract were eliminated by centrifugation followed by membrane filtration or SPE before injection into HPLC.

가축분뇨실태조사를 위한 양분수지 산정 모델 개발 (Development of a Nutrient Budget Model for Livestock Excreta Survey)

  • 김덕우;유홍덕;임도영;정유진;김용석
    • 한국물환경학회지
    • /
    • 제33권6호
    • /
    • pp.769-779
    • /
    • 2017
  • Nutrient (i.e., nitrogen and phosphorus) budgets are required under a 'Livestock Excreta Survey'. A nutrient budget is one of the agri-environmental indicators that calculates the difference between the inputs and outputs of the amount of nutrients within a certain boundary and for a certain time period (e.g., 1 year). In this study, a nutrients budget model was developed to effectively determine the surplus of nutrients within a region in Korea. The C# program language was used in order to facilitate the deployment of a graphical user interface (GUI) and to enhance compatibility. Also, the model was developed on Windows OS, which is the commonly used operating system in Korea. The model was based on the OECD/Eurostat nutrient budget method, and it was modified to consider manure composting procedures as well. There are key features of the nutrient budget model, including directly use of the original data sets from various input and output sources, and a collectively exchange of the address in different formats. The model can quickly show the results of various spatial and temporal resolutions with the same data, as well as perform a sensitivity analysis with coefficients and easily compareresults using tables and graphs. Further, it would be necessary to study the extension of the scope of utilization, such as the application of various nutrient budget methods. It would also be helpful to investigate both pre and postprocessing information such as linking input data through online systems.

공공하수처리시설 방류수 TOC에 영향을 주는 요인 분석 (Analysis of factors affecting effluent TOC in publicly owned treatment works)

  • 강성주;강병준;박규홍;정동환;이원석;정현미
    • 상하수도학회지
    • /
    • 제33권2호
    • /
    • pp.141-150
    • /
    • 2019
  • Total organic carbon(TOC) was introduced as the water quality index of the rivers and lakes in 2013. This paper evaluated factors affecting effluent TOC concentrations and treated and discharged loads of existing publicly owned treatment works(POTWs). For selected POTWs with greater treatment capacity than $500m^3/day$, factorial analysis was used to consider effects of kinds of biological treatment processes, inflow of other types of wastewater(industrial, livestock, landfill leachate wastewater, etc.) with domestic wastewater, sewer separation rate, and effluent discharging zones in which different effluent criteria applied. As a result, those factors did not show significant effect on effluent TOC concentration of POTWs in effluent discharging zone I and II. However, In effluent discharging zone III and IV, kinds of biological treatment processes, the inclusion of other waste in influent of domestic wastewater, and the sewer separation rate were significant factors. The treated TOC load in POTWs was also not affected significantly by the variables set in this study. On the other hand, those three factors influenced significantly on the TOC load discharged to water bodies. The sum of factorial effects and the contribution rate of three factors to the discharged TOC load was 60.23 and 41%, 59.57 and 41%, and 42.04 and 18%, respectively.