• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.817-827
• /
• 2016

The resistance in series model has been frequently used for determination of various filtration resistance to correctly understand the membrane fouling behaviour in MBR (membrane bio-reactor) for wastewater treatment. The cake layer resistance ($R_c$) which is commonly determined by calculation of flux dataset that are obtained empirically before and after removing the cake layer on membrane surface. However, the calculated Rc values are very dependent on the cleaning methods adapted for removal of cake layer. This study investigated how the various cleaning options affect $R_c$. Seven different cleaning methods were employed: i) ultrasonication (100 W, 10 min), ii) ultrasonication (200 W, 60 min), iii) ultrasonication (400 W, 120 min), iv) water rinsing in a shaker (100 rpm, 10 min), v) water rinsing in a shaker (300 rpm, 60 min), vi) water rinsing, vii) sponge scrubbing. For the hydrophilic PES membrane, the cake layer removal efficiencies ranged from 64% to 10%, indicating that the removal of cake layer was highly dependent on the cleaning options. For the hydrophobic PVDF membrane, the cake layer removal efficiencies ranged from 79% to 97%. Consequently, a standardized method for cake layer removal to determine cake resistance ($R_c$) is needed for correct interpretation of the fouling phenomena.

• Wind and Structures
• /
• v.37 no.3
• /
• pp.191-209
• /
• 2023

This work investigates the subcritical free-shear prism wake at Re=22,000 by the Koopman analysis using the Dynamic Mode Decomposition (DMD) algorithm. The Koopman model linearized nonlinearities in the stochastic, homogeneous anisotropic turbulent wake, generating temporally orthogonal eigen tuples that carry meaningful, coherent structures. Phenomenological analysis of dominant modes revealed their physical interpretations: Mode 1 renders the mean-field dynamics, Modes 2 describes the roll-up of the Strouhal vortex, Mode 3 describes the Bloor-Gerrard vortex resulting from the Kelvin-Helmholtz instability inside shear layers, its superposition onto the Strouhal vortex, and the concurrent flow entrainment, Modes 6 and 10 describe the low-frequency shedding of turbulent separation bubbles (TSBs) and turbulence production, respectively, which contribute to the beating phenomenon in the lift time history and the flapping motion of shear layers, Modes 4, 5, 7, 8, and 9 are the relatively trivial harmonic excitations. This work demonstrates the Koopman analysis' ability to provide insights into free-shear flows. Its success in subcritical turbulence also serves as an excellent reference for applications in other nonlinear, stochastic systems.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.60-65
• /
• 2013

Introducing the concept of construction safety in the design/engineering phase can improve the efficiency and effectiveness of safety management on construction sites. In this sense, further improvements for safety can be made in the design/engineering phase through the development of (1) an automated hazard identification process that is little dependent on user knowledge, (2) an automated construction schedule generation to accommodate varying hazard information over time, and (3) a visual representation of the results that is easy to understand. In this paper, we formulate an automated hazard identification framework for construction safety by extracting hazard information from related regulations to eliminate human interventions, and by utilizing a visualization technique in order to enhance users' understanding on hazard information. First, the hazard information is automatically extracted from textual safety and health regulations (i.e., Occupational Safety Health Administration (OSHA) Standards) by using natural language processing (NLP) techniques without users' interpretations. Next, scheduling and sequencing of the construction activities are automatically generated with regard to the 3D building model. Then, the extracted hazard information is integrated into the geometry data of construction elements in the industry foundation class (IFC) building model using a conformity-checking algorithm within the open source 3D computer graphics software. Preliminary results demonstrate that this approach is advantageous in that it can be used in the design/engineering phases of construction without the manual interpretation of safety experts, facilitating the designers' and engineers' proactive consideration for improving safety management.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.339-352
• /
• 2016

The best way of investigating the physical and mechanical properties of subsurface materials is the combined interpretation of data from borehole geophysical surveys and geotechnical experiments with rock samples. In this study two surface seismic surveys with refraction and surface-wave method are alternatively conducted for downhole seismic surveys in test site for geological field trip in Jeungpyung, Chungbuk. P- and S-wave velocity structures are delineated by refraction and MASW (multichannel analysis of shear waves) methods, respectively. Possion's ratio section, reconstructed from P- and S-wave velocities, is correlated to the outcrop geological features consisting of reddish sedimentary rock, gray volcanic rock, and joints/fractures. In addition, rock samples representative for reddish sedimentary and gray volcanic features are geotechnically analyzed to provide physical, mechanical properties, and elastic modulus. Dynamic elastic moduli estimated from geophysical data is found to be higher than the one from geotechnical data. Reddish sedimentary rock characterized with low porosity and moisture content corresponds to the zone of low electrical resistivities and their small variations in the resistivity sections between the rainy and dry days. This trend suggests that the weathered gray volcanic rock and the nearby fractures with higher low porosity and moisture content are interpreted to be good carrier especially in rainy season.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.349-362
• /
• 2000

In the study, the feasibility of landscape ecological measures as indices system for interpretation and evaluation of regional ecosystem was investigated through the application to Yongin City. Each patch metrics well showed the class structure and supplemented the class metrics, and class metrics also showed well the landscape structure and supplemented the landscape metrics. And the change analysis through subtraction of two set of landscape ecological measurement in two point of time showed the dynamic trends very well. One of the dynamic trends in Yongin City was the rapid fragmentation. While there was no landcover data on Yongin City, using Landsat data and remote sensing techniques were proved to be efficient and effective to produce the digital landcover data.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.63-66
• /
• 1997

This paper is concerned with the current status and the prospectus of environmental investments in the manufacturing sector. A questionnaire survey was made to identify the concentrated fields of the investments. The collected data were analyzed by a multidimensional scaling method in order to provide a reasonable interpretation on the major factors which characterize the current situation and the prospectus of the investments as well as the relative position of each respondent company in a spatial map. The result tells us most respondents tend to concentrate their attention on end-of-pipe solutions due to technological tangibility and economic efficiency, etc.

• Economic and Environmental Geology
• /
• v.33 no.2
• /
• pp.111-116
• /
• 2000

Indentifying anomaly correlations between data sets is the basis for rationalizig geopotential interpretation and theory. A procedure is presented that constitutes an effective process for identifying correlative features between the two or more geopotential data sets. Anomaly features that show direct, inverse, or no correlations between the data may be separated by applying filters in the frequency domains of the data sets. The correlation filter passes or rejects wavenumbers between co-registered data sets based on the correlation coefficient between common wavenumbers as given by the cosine of their phase difference. This study includes an example of Magsat magnetic anomaly profile that illustrates the usefulness of the procedure for extracting correlative features between the data sets.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.313-321
• /
• 1994

Structural interpretation by using subsurface attitude of coal seam and outcrop patterns of folds and faults shows that wrench and thrust tectonics took place simultaneously in the study area. From the interference patterns of fold axes, three generations of folding are suggested: $F_1$ (NE-SW), $F_2$ (N-S), and $F_3$ (E-W). Differential displacement of rock mass from north to south yields to E-W fold and Osypcheon Fault. Geometry of subsurface coal seam show different patterns comparing to those of surface outcrop because of shallow-depth crustal shortening which took place post Cretaceous.

• Economic and Environmental Geology
• /
• v.28 no.2
• /
• pp.155-164
• /
• 1995

The kriging model, one of the geostatistical models, has been used to evaluate the deep-sea manganese nodule deposits until now. The distribution of the manganese nodule deposits estimated by the model shows the smooth surface as well as much difference from the actual distribution. Subsequently, it estimates the deposit distribution roughly in terms of the limited data of surveyed zone. Therefore, this paper presents the interpretation methodology of the deep-sea manganese nodule deposit distribution by using the fractal model to overcome the problems caused by the geostatistical model. Also, the manganese nodule distributions are interpreted by using the manganese nodule data sampled in the GH82-4 zone, west longitude $165^{\circ}40^{\prime}-169^{\circ}00^{\prime}$, and south latitude $0^{\circ}00^{\prime}-2^{\circ}40^{\prime}$ neighboring Nova-Canton Trough in the Pacific Ocean which was surveyed by the Geological Survey of Japan in 1982.

• Environmental Analysis Health and Toxicology
• /
• v.22 no.1 s.56
• /
• pp.1-8
• /
• 2007

Biological monitoring, analyses of internal dose for exposure to toxicants, has been thought as one of the belt approaches for risk assessment. As the amount detected in human samples is generally very low, typically in the parts-per-bilion (ppb) or parts-per-trillion (ppt) range, analytic technologies such at HPLC, GC/MS, LC/MS, and LC/MS/MS have been continuously developed. In addition, route specific and sensitive exposure biomarkers have been developed for proper biological monitoring. PBPK modeling, particularly reverse dosimetry, has been emphasized as an useful method via interpretation of biological monitoring results for regulation of toxicants. Thus, this review is focused on the use of PBPK dosimetry models for toxicology research and risk assessment in Korea.