• 한국환경복원기술학회지
• /
• 제10권6호
• /
• pp.44-52
• /
• 2007

Recently, oystershell wastes cause serious environmental problem and the need for the researches on the recycling of oystershell have been increased and various methods are already in operation. Field plate bearing tests and numerical analysis were performed to investigate the bearing capacity of oystershell filled geotextile gabion which utilized the waste oystershell at the coastal oyster farm site. The waste oystershell mixed soil specimens were prepared for the laboratory test and field test in terms of varying blending ratio of granite soil and oystershell. Based on the cyclic plate load test results, the spring constant, subgrade modulus of ground, and the reinforcing parameters were determined. The field plate load test results indicate that the bearing capacity of the soil ground with the oystershell mixed ratio of 20% is greater than that of the original ground. Two-dimensional numerical analysis was evaluated the expected deformation in the given conditions. Analysis results show a similar characteristics on bearing capacity with the results of the field plate load test. These findings suggest that the oystershells are very promising construction materials for landfill and earth embankment in coastal area.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1331-1344
• /
• 2021

This study is to evaluate the seismic capacity of the fire-damaged cabinet facility in a nuclear power plant (NPP). A prototype of an electrical cabinet is modeled using OpenSees for the numerical simulation. To capture the nonlinear behavior of the cabinet, the constitutive law of the material model under the fire environment is considered. The experimental record from the impact hammer test is extracted trough the frequency-domain decomposition (FDD) method, which is used to verify the effectiveness of the numerical model through modal assurance criteria (MAC). Assuming different temperatures, the nonlinear time history analysis is conducted using a set of fifty earthquakes and the seismic outputs are investigated by the fragility analysis. To get a threshold of intensity measure, the Monte Carlo Simulation (MCS) is adopted for uncertainty reduction purposes. Finally, a capacity estimation model has been proposed through the investigation, which will be helpful for the engineer or NPP operator to evaluate the fire-damaged cabinet strength under seismic excitation. This capacity model is presented in terms of the High Confidence of Low Probability of Failure (HCLPF) point. The results are validated by the proper judgment and can be used to analyze the influences of fire on the electrical cabinet.

• 한국지반환경공학회 논문집
• /
• 제7권5호
• /
• pp.67-77
• /
• 2006

성토지반의 지지력을 향상시키기 위하여 지반개량이나 다짐과 같은 일반적인 방법들이 많이 이용되고 있다. 하지만, 최근에는 내구성이 크고 강한 합성수지와 같은 재료들이 개발되어 실용화됨으로서, 보강토공법이 널리 적용되고 있는 실정이다. 본 연구에서는 한층의 지오텍스타일로 보강된 모래지반상의 대상기초에 대한 모형실험을 평면변형률 상태에서 실시하여, 지오텍스타일의 설치위치와 길이, 강도의 변화에 따른 지지력의 증대효과와 지반의 거동을 관찰하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.74-81
• /
• 2004

In this study, static end loading tests with load transfer measurement were accomplished for large diameter drilled shaft constructed in fault zone. Yield pile capacity (or ultimate pile capacity) from load-settlement curve was determined and axial load transfer behavior was measurd. The end bearing capacity was increased 2 times due to grouting the toe ground under pile base.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.527-534
• /
• 1995

The waste biomass of Sacchromyces uvarum, used in fermentation industries to produce ethanol, were studied for their ability to absorb various heavy metal ions. Heavy metal ions studied in this research were Cd, Co, Cr, Cu, Ni and Pb. The order of the sorption capacity was Pb>Cu>Co=Cr=Cd>Ni. The living Sacchromyces uvarum exhibited higher metal-uptake capacity than the dead Sacchromyces uvarum. After we compare the uptake capacity of the Sacchromyces uvarum for individual metal ions with for a mixture of them, the following was observed: in the mixed heavy metal solution the uptake capacity was decreased than the one heavy metal solution. The selective uptake was observed when all . the heavy metal ions were dissolved in a mixed solution. The adsorption isotherm modelling was decribed with the Langmuir and Freundlich model. The results were in good agreement with the Langmuir model.

• Structural Engineering and Mechanics
• /
• 제35권5호
• /
• pp.593-616
• /
• 2010

The seismic performance of reinforced concrete (RC) bridge columns is a significant issue because the interaction of flexural ductility and shear capacity of such columns with varied amounts of lateral reinforcement is not well established. Several relationships between flexural ductility and shear capacity have been proposed by various researchers in the past. In this paper, a parametric study on RC bridge columns is conducted using a nonlinear finite element program, "Simulation of Concrete Structures (SCS)", developed at the University of Houston. SCS has been previously used to predict the seismic behavior of such columns. The predicted results were compared with the test results obtained from experiments available in literature. Based on the results of the parametric study performed in this paper, a set of new relationships between flexural ductility and shear capacity of RC columns is proposed for seismic design.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.25-32
• /
• 1993

Granular activated carbon is commonly used in fixed-bed adsorbers to remove organic chemicals. In this experiment organic chemical solutions were prepared by adding the reagent grade organic chemical to distilled water. Isotherm adsorption tests of volatile organic chemicals were conducted using bottle-point technique and column test. Organic chemicals after passing through the column were extracted with hexane and analyzed with gas chromatography (Hewlett-Packard 5890) to check the adsorption capacity and breakthrough curve. The result were as follows: 1. The BET surface area of coconut activated carbon was 658~1,010 m$^2$/g where as coconut shell carbon was 6.6 m$^2$/g. Coconut activated carbon increased the BET surface area and adsorption capacity in bottle-point isotherm. 2. The adsorption capacity of coconut activated carbon for trichloroethylene (TCE) was reduced in the presence of humic substance. 3. A decrease in particle size of activated carbon resulted in higher adsorption capacity and lower intraparticle diffusion coefficient. It is reflected not only as a decrease in Freudlich adsorption capacity value (K) but also as an increase in Freudlich exponenent value (1/n).

• 한국환경보건학회지
• /
• 제37권1호
• /
• pp.50-56
• /
• 2011

The adsorption capacity of charcoal is a function of the airborne concentration of the target chemical. To evaluate the adsorption capacity of charcoal packed in the cartridges of air purifying respirators, breakthrough tests were conducted with carbon tetrachloride for three commercial cartridges (3M models #7251, #6000 and AX) at 25, 50, 100, 250 and 500 ppm. Adsorption capacities were calculated using a mass transfer balance equation derived from the curve fitting to the breakthrough curves obtained experimentally. Carbon micropore volumes were estimated by iteration to fit the Dubinin/Radushkevich (D/R) adsorption isotherm. They were 0.6566, 0.5727 and 0.3087 g/cc for #7251, #6000 and the AX cartridge, respectively. Above 100 ppm (at high challenge concentrations), #7251 and #6000 showed higher adsorption capacities. However, as the challenge concentration decreased, the adsorption capacities of #7251 and #6000 sharply dropped. On the other hand, the adsorption capacity of the AX cartridge showed little change with the decrease of the challenge concentration. Thus, the AX showed a higher adsorption capacity than #7251 and #6000 at the 5-50 ppm level. It is concluded that service-life tests of cartridges and adsorption capacity tests of charcoal should be conducted at challenge concentration levels reflecting actual working environmental conditions. Alternatively, it is recommended to use the D/R adsorption isotherm to extrapolate adsorption capacity at low concentration levels from the high concentration levels at which breakthrough tests are conducted, at a minimum of two different concentration levels.

• 한국전문물리치료학회지
• /
• 제24권3호
• /
• pp.1-9
• /
• 2017

Background: The method of measuring the walking function of patients with chronic stroke differs depending on patients walking capability and environmental conditions. Objects: This study aimed to demonstrate the influences of walking capacity and environmental conditions on the results of short- and long-distance walk tests in patients with chronic stroke. Methods: Forty patients with chronic stroke volunteered for this study, and allocated to group-1 (<.4m/s, household walking, $n_1=13$), group-2 (.4~.8m/s, limited community ambulation, $n_2=16$), and group-3 (>.8m/s, community ambulation, $n_3=11$) according to their walking capacity. The 10-meter walk test (10MWT) and 6-min walk tests, (6MWT) were used to compare the short- and long-distance walk tests results, which were randomly performed under indoor and outdoor environmental conditions. Results: The comparison of the results obtained under the indoor and outdoor conditions revealed statistically significant differences between the groups in the 6MWT and 10MWT (p<.05). Post-hoc tests' results showed significant differences between groups-1 and -2 and between groups-1 and -3 in the 10MWT, and between group-1 and -3 in the 6MWT. Furthermore, in group-2 the 10MWT and 6MWT results significantly differed between the indoor and outdoor conditions, and the values measured under the indoor and outdoor conditions significantly differed between 10MWT and 6MWT (p<.05). Group-3 showed a significant difference in 10MWT results between the indoor and outdoor conditions (p<.05). Conclusion: These findings suggest that the results of the short- and long-distance walk tests may differ depending on the walking capacity of patients with chronic stroke and the environmental condition under which the measurement is made, and these effects were greatest for the patients with the limited community ambulation capacity.

• 지역연구
• /
• 제33권4호
• /
• pp.29-42
• /
• 2017

이 연구는 중국 지방정부 역량이 대기오염 개선에 미치는 영향을 실증적으로 분석하는 것을 목적으로 한다. 이를 위해 2007년부터 2014년까지 중국 성급 행정단위를 대상으로 $SO_2$, $CO_2$, 분진 등 대기오염 물질과 지방정부 역량에 관한 자료를 이용하여 동적패널모형을 구축하였다. 분석 결과는 지방정부의 역량 중에서 환경인력, 환경예산, 환경기관 평균규모 등 조직역량이 가장 중요하고, 제도역량이나 사회역량은 대기오염 개선에 대한 영향이 미미함을 보여준다. 조직역량 이외의 지방정부 역량 중에서는 사회역량인 환경단체의 활동성만이 부분적으로 대기오염 개선에 영향을 미치고 있다. 지역 여건과 관련해서는 재정의 수직적 의존도 및 1인당 GDP, 인구 밀도 등이 대기오염 개선에 부정정적인 영향을 미친다. 이러한 연구결과는 대기오염 개선을 위해 중국 지방정부들이 어떤 역량을 특히 강화해야 하는지에 대한 시사점을 제공한다.