• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.86-94
• /
• 2004

The characteristics of food waste in our country is high contents of water and sodium chloride(NaCl). Average water contents of household garbage was 80.0%, and those of wastes of restaurants and of wholesale market of agricultural products was 76.9% and 90.0%, respectively. The NaCl contents were high in household garbage and restaurant's waste as 3.36% and 4.84%, respectively. The NaCl contents of food waste composts made by various techniques known upto now were under the level of 1% by fresh weight basis. But these techniques has some problem that is environment pollution from treated water and high equipment cost. The application to agricultural land of food waste compost that is not sufficiently removed NaCl was considered to be improper due to salt accumulation in soils and plant growth inhibition by salt stress. The purpose of this study is to decompose NaCl in food waste compost using triple salt and this method is differ from existing chemical method. Also, reaction of NaCl with triple salt produced KCl that is basic material of potassium fertilizer. The experiment results of growing lettuce produced difference between food waste compost and treated food waste compost with triple salt. The latter got more high sprouting ratio and a growth rate.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.241-277
• /
• 2009

The purpose of this paper is to compare technical efficiencies and productivities without and with environmental constraints, and shadow prices of $SO_x$ in Korean and Chinese industries. The technical efficiencies without and with environment in Chinese manufacturing industries are higher than those in Korean manufacturing industries for 2000-2004. Most of individual Chinese manufacturing dominate those of Korean manufacturing in levels of technical efficiency. In terms of productivity changes excluding environmental constraints, the rates of annual growth in Korean and Chinese industries show 1.13 percent and 2.73 percent respectively. But Korean industry in productivity changes considering $SO_x$ reduction shows 2.41 percent, higher rate of growth than 1.58 percent of Chinese industry. In the shadow prices of $SO_x$, the reduction of an additional unit of $SO_x$ in the Korean manufacturing needs a decrease of 1.473 unit of output, while the shadow price of $SO_x$ in Chinese manufacturing is 0.0049, close to zero. Korean manufacturing should be specialized in higher sectors of technical efficiency and productivity and be also kept efficient in pollution abatement cost.

• Journal of Environmental Impact Assessment
• /
• v.13 no.3
• /
• pp.125-135
• /
• 2004

Environmental Impact Assessment(EIA) in Korea has been used to improve environmental conservation and decision-making. Since environmental impact statement(EIS) was introduced in 1981 with the promulgation of the Environmental Preservation Act in 1977, which replaced the Pollution Control Act legislated in 1963. With a rapid growth of environmental perception as well as the diversification of development activities, however, it has recently bring about a strong demand for a new assessment process related to the strategic level of policies, plan, programs. Method of this study includes analyses of the situation of local EIA and its problematic issues through survey and analysis of information and data, analysis of the level of environmental awareness of professionals and case studies including analysis of foreign strategic environmental assessment. Accordingly, I have elicited a concept of SEA. In addition, I have studied on costs of environmental assessment, and efficiency of internalization of HIA. The survey was carried between September and November 2003, and 177 professionals were asks to complete a questionnaire. As a result of questionnaire survey of environmental pundits, it revealed that 83.8% of participants were in favor of introduction of strategic assessment. This result demonstrated more or less higher approval rate than those of awareness survey done by the Ministry of Environment, i.e. 86.0% ayes, and 14.0% nays. 22.8% of participants agreed to the opinion; "For introduction of this system, earlier is better," 50% reported having an opinion such as, "Will introduce this system in an earliest possible time after correcting problems," 26.3% reported having an opinion such as, "Let's decide the time for introduction of this system after correcting problems first,' and 0.9% reported having an opinion, "it's too early to introduce this system." Specifically, the ratio of ayes on introduction of the system marked 72.8%, and it revealed that a majority of respondents have an opinion such as, "Will introduce this system in an earliest possible time after correcting problems." As means of solutions for the problem regarding the limits of applications that existed in SEA System, factors, such as collecting a wide variety of opinions, securing experts, and faithful implementation, etc. were reported important, and in addition to these factors, respondents revealed having opinions such as, consistent research and development, reflection of public interest, establishment of professional organization, enforcement of after-management service, expanding investments in large, systemizing reference materials, and encouraging public participation, etc. To improve problems involving with present EIA system, it has been identified through this study that SEA is efficient and useful. In order to have SEA introduced successfully, it has been cleared that internalization of effectiveness of environmental cost together with HIA must be accomplished.

• Journal of the Korean Regional Science Association
• /
• v.34 no.2
• /
• pp.21-34
• /
• 2018

The purpose of this study is to analyze the spatial-temporal proliferation of individual factories in the Seoul Metropolitan Area and to provide policy implications. The location of the factory is divided into individual locations and planned locations. In the case of individual locations, it takes a long time to establish factories. Also, due to high cost and regulation, the establishment of individual factories is not easy. However, since the establishment process is simple and the price of land is low, the establishment of individual factories has led to an increase in the number of individual factories. The problem of the undeveloped factories is that the lack of infrastructure such as the road and environmental pollution treatment facilities around the factory deteriorates the pleasant environment and the cityscape and deteriorates the health of the residents in the surrounding area. In this study, we analyzed the location of individual factories established in the Seoul metropolitan area from 2001 to 2016 by using ArcGIS Pro. The results of the analysis are as follows. First, individual location factories are formed around existing industrial complexes and industrial sites. The reason for this is considered to be the external effect that can be obtained from the surrounding area. Secondly, since the Seoul city's individual location factories are established in many residential areas, it shows the conflicting result of the mixture of residence and factory. Third, the Gyeonggi province's individual location factories have a high proportion of non-urban areas. This is because the Gyeonggi province's management area occupies a larger proportion than other areas in Gyeonggi province. This study analyzed the spatial - temporal spreading process of individual factories and the unfolding of individual factories in the metropolitan area, and it can provide policy implications to control the over development of individual factories in the future.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.95-102
• /
• 2015

Recently, the maintenance activity for aging of bridge structures was difficult because of traffic jam, environment pollution and increasing cost. And to solve these problems, modular bridge research has been studied. After static and cyclic loading test was conducted for serviceability and bending performance with one way slab, effective moment of inertia of modular specimen was analyzed to estimate the deflection by KCI(2012). To conduct the test, one integral slab and three modular slabs were made for static loading and one integral and modular slab were made for cyclic. As a result of the test, the modular slab had the similar bending performance of the integral. But the ultimate deflection showed the insufficient which was smaller than 20%. In the cyclic loading test, the modular slab has different behavior of deflection with the integral, so it was evaluated difficult for serviceability. In addition, effective moment of inertia by KCI(2012) was not estimated for modular slab with connection. The new value of m which was ratio between moments is 4.53 based on result of test for predicting deflection of modular.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.328-336
• /
• 2018

Background: Biogenic fabrication of silver nanoparticles from naturally occurring biomaterials provides an alternative, eco-friendly and cost-effective means of obtaining nanoparticles. It is a favourite pursuit of all scientists and has gained popularity because it prevents the environment from pollution. Our main objective to take up this project is to fabricate silver nanoparticles from lichen, Usnea longissima and explore their properties. In the present study, we report a benign method of biosynthesis of silver nanoparticles from aqueous-ethanolic extract of Usnea longissima and their characterization by ultraviolet-visible (UV-vis), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM) analyses. Silver nanoparticles thus obtained were tested for antimicrobial activity against gram positive bacteria and gram negative bacteria. Results: Formation of silver nanoparticles was confirmed by the appearance of an absorption band at 400 nm in the UV-vis spectrum of the colloidal solution containing both the nanoparticles and U. longissima extract. Poly(ethylene glycol) coated silver nanoparticles showed additional absorption peaks at 424 and 450 nm. FTIR spectrum showed the involvement of amines, usnic acids, phenols, aldehydes and ketones in the reduction of silver ions to silver nanoparticles. Morphological studies showed three types of nanoparticles with an abundance of spherical shaped silver nanoparticles of 9.40-11.23 nm. Their average hydrodynamic diameter is 437.1 nm. Results of in vitro antibacterial activity of silver nanoparticles against Staphylococcus aureus, Streptococcus mutans, Streptococcus pyrogenes, Streptococcus viridans, Corynebacterium xerosis, Corynebacterium diphtheriae (gram positive bacteria) and Escherichia coli, Klebsiella pneuomoniae and Pseudomonas aeruginosa (gram negative bacteria) showed that it was effective against tested bacterial strains. However, S. mutans, C. diphtheriae and P. aeruginosa were resistant to silver nanoparticles. Conclusion: Lichens are rarely exploited for the fabrication of silver nanoparticles. In the present work the lichen acts as reducing as well as capping agent. They can therefore, be used to synthesize metal nanoparticles and their size may be controlled by monitoring the concentration of extract and metal ions. Since they are antibacterial they may be used for the treatment of bacterial infections in man and animal. They can also be used in purification of water, in soaps and medicine. Their sustained release may be achieved by coating them with a suitable polymer. Silver nanoparticles fabricated from edible U. longissima are free from toxic chemicals and therefore they can be safely used in medicine and medical devices. These silver nanoparticles were stable for weeks therefore they can be stored for longer duration of time without decomposition.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.6
• /
• pp.33-50
• /
• 2023

This study is to propose the ecosystem service valuation method as a complementary or alternative tool to overcome the limitations of the contingent valuation method(CVM), typically used to assess social benefits in preliminary feasibility studies. With an increasing interest in natural and environmental restoration projects, we assessed social benefits with theses CVM and ecosystem service valuation method from a case of Janghang wetland restoration project and compared the extent of the two social benefits. For quantitative evaluation of ecosystem services, the biophysical quantity for each ecosystem service indicator was calculated and then converted into currency (KRW) units to estimate the economic value of ecosystem services. The four ecosystem regulating service indicators were selected including greenhouse gas capture/storage, air pollution, water quantity and quality regulation. The amounts of CO₂ sequestration and storage as a ecosystem's greenhouse gas regulating service in the study area were 73.04 tCO₂/yr and 5,867.53 tCO₂/yr respectively. The reduction of SO₂, one of air pollutant gases by ecosystems was calculated to be 180.27 kg/yr, the reduction of NO₂ to be 378.90 kg/yr, and the reduction of fine dust (PM10) to be 9,713.92 kg/yr. The amount of freshwater regulating service by the ecosystem was estimated to be 459,394,319ℓ/yr, and the amount of nitrogen in freshwater removed by the ecosystem was 78.00kg/yr. Study results show that the benefits derived from the CVM were KRW 227.8 billion over the 30-year analysis period and those from the ecosystem service valuation method were KRW 41.4 billion for regulatory services and KRW 148.8 billion for cultural services, totaling KRW 189.5 billion. With KRW 184.8 billion of the total costs, the benefit/cost ratio using the CVM was 1.23 and that with the ecosystem service valuation method was 1.03. This study implications include that the CVM and ecosystem service valuation method can be applied together to assess and compare social benefits for natural and environmental restoration projects.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.31
• /
• pp.27-56
• /
• 2006

Today's financial institutions usually take environmental issues seriously into consideration as they could not evade lender liability in an increasing number of cases. On the international scene, a brand-new concept of the "Equator Principles" in the New Millenium has driven more and more international banks to adopt these Principles in project financing. Sustainable development has been a key word in understanding new trends of the governments, financial institutions, corporations and civic groups in the 21st century. The Equator Principles are a set of voluntary environmental and social guidelines for sustainable finance. These Principles commit bank officers to avoid financial support to projects that fail to meet these guidelines. The Principles were conceived in 2002 on an initiative of the International Finance Corporation(IFC), and launched in June 2003. Since then, dozens of major banks, accounting for up to 80 percent of project loan market, have adopted the Principles. Accordingly, the Principles have become the de facto standard for all banks and investors on how to deal with potential social and environmental issues of projects to be financed. Compliance with the Equator Principles facilitates for endorsing banks to participate in the syndicated loan and help them to manage the risks associated with large-scale projects. The Equator Principles call for financial institutions to provide loans to projects under the following circumstances: - The risk of the project is categorized in accordance with internal guidelines based upon the environmental and social screening criteria of the IFC. - For Category A and B projects, borrowers or sponsors are required to conduct a Social and Environmental Assessment, the preparation of which must meet certain requirements and satisfactorily address key social and environmental issues. - The Social and Environmental Assessment report should address baseline social and environmental conditions, requirements under host country laws and regulations, sustainable development, and, as appropriate, IFC's Environmental, Health and Safety Guidelines, etc. - Based on the Social and Environmental Assessment, Equator banks then make agreements with borrowers on how they mitigate, monitor and manage the risks through a Social and Environmental Management System. Compliance with the plan is included in the covenant clause of loan agreements. If the borrower doesn't comply with the agreed terms, the bank will take corrective actions. The Equator Principles are not a mere declaration of cautious banks but a full commitment of lenders. A violation of the Principles in the process of project financing, which led to an unexpected damage to the affected community, would not give rise to any specific legal remedies other than ordinary lawsuits. So it is more effective for banks to ensure consistent implementation of the Principles and to have them take responsible measures to solve social and environmental issues. Public interests have recently mounted up with respect to environmental issues on the occasion of the Supreme Court's decision (2006Du330) on the fiercely debated reclamation project at Saemangeum. The majority Justices said that the expected environmental damages like probable pollution of water and soil were not believed so serious and that the Administration should continue to implement the project seeking ways to make it more environment friendly. In this case, though the Category A Saemangeum Project was carried out by a government agency, the Supreme Court behaved itself as a signal giver to approve or stop the environment-related project like an Equator bank in project financing. At present, there is no Equator bank in Korea in contrast to three big banks in Japan. Also Korean contractors, which are aggressively bidding for Category A-type projects in South East Asia and Mideast, might find themselves in a disadvantageous position because they are generally ignorant of the environmental assessment associated with project financing. In this regard, Korean banks and overseas project contractors should care for the revised Equator Principles and the latest developments in project financing more seriously. It's because its scope has expanded to the capital cost of US$10 million or more across all industry sectors regardless of developing countries or not. It should be noted that, for a Korean bank, being an Equator bank is more or less burdensome in a short-term period, but it must be conducive to minimizing risks and building up good reputation in the long run.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.47-55
• /
• 2005

Roads deeply affect the life of people and keep doing an important role to support economic growth of a country. According to the budget plan of the ministry of construction and transportation of Korea, 8.1 trillion won have been allotted for road investment in the year of 2002 which occupy 61% of the transportation infrastructure special account (13.3 trillion won) and 4.7% of the total national budget (1,740 trillion won). It is true that services generated from road investment such as mobility enhancement and increased accessibility have shown positive effects through shortened travel time and decreased vehicle operating cost. However, it is also notable that many negative effects are gradually being discussed and those are nowadays getting severer due to enhanced people interests about road construction, increased concerns on environment and active public involvement that were evoked by traffic accidents, air pollution & noise and destruction of environment. Road construction processes in Korea are normally governed by administrative sectors (suppliers) not by users. These processes ate very weak to accomodate user s needs and community concerns thus easy to fail finalizing a road project without hassles. A public hearing process is supposed to be held in the processes of detailed design step and the environmental impact analysis. However, it is not enough to grab user's needs and community concerns. Increased public involvement frequencies, optimized public involvement timing and enhanced depth of public involvement magnitude are suggested to improve the current poor public involvement schemes in road planning and design processes. The application of these recommended methods to the road planning and design processes may guarantee the change from the current supplier-oriented schemes to the new user-oriented one. Also, this study suggests to reset objectivity and clarity of road construction process, to make conciliation guidelines based on many practical cases that produced good results, to introduce public involvement techniques in a stepwise basis, and to foster the professionals via education and training programs.