• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.996-1006
• /
• 2017

Phasor Measurement Unit (PMU) placement is a crucial problem for State Estimation (SE) of the power system, which can ensure that the power network is fully observed. Further, the observation reliability problem of the system has been concerned in the operation conditions. In this paper, based on modified weighted adjacent matrix ($A_w$), an optimal placement method is proposed to solve simultaneously two problems involving the optimal PMU placement problem and the observation reliability enhancement problem of the system. The purpose of the proposed method is to achieve both the minimum total cost and the maximum observation reliability, with a focus on increasing the security of observability, strengthening the observation reliability of buses as well as enhancing the effectiveness of redundancy. Simulations on IEEE 14, 24, 30 and 57 bus test systems are presented to justify the methodology. The results of this study show that the proposed method is not only ensuring the power network having the observability effectively but also enhancing significantly the observation reliability. Therefore, it can be a useful tool for SE of the power system.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제38권2호
• /
• pp.165-172
• /
• 1999

$\sub$e/$\^$2/, that were results from those three sources of such imperfection. Especially to eliminate the differences in severity among many raters the randomization procedure of raters sample was very effective in enhancing the reliability of ratings with comparatively small groups of examinees and raters. And we also introduced the new rating methods, i.e. the 2-step diagnostic procedures to check the sizes of the reliability stability of raters and the sore adjustment method to enumerate the optimal mean values in rating the examinees.

• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.117-122
• /
• 2014

Indexes of safety, restoration, damage impact, and management reliability were developed to assess reliability of drinking water distribution networks (DWDNs) management. The developed indexes were applied to evaluate the reliability of the pipeline management stage during unexpected mechanical and hydraulic accidents of components. The results were used to support the decision-making process in effective management and maintenance by enhancing the administrator's system understanding and by helping to create appropriate maintenance and management policies. The results of this study indicated that application of a management reliability index to assess DWDNs reliability may help create a more effective plan for establishing DWDNs management and maintenance.

• 정보처리학회논문지C
• /
• 제15C권4호
• /
• pp.227-238
• /
• 2008

인터넷 인구가 폭발적으로 증가하면서 인터넷 접속 관문이라 할 수 있는 DNS 정보의 위 변조시 엄청난 사회.경제적 피해를 양산할 수 있다. 그러나 DNS 정보의 보호를 위한 기존의 연구들은 현재 구축되어 있는 DNS 시스템 버전의 한계, 관리 부하의 증대 등으로 인하여 실세계 적용에 한계를 보이고 있다. 이 연구는 현재의 DNS 서비스 환경에서 DNS 정보에 대한 위 변조 공격 방법을 분석하고 독립적으로 DNS 정보의 오염 여부를 실시간으로 탐지할 수 있는 방법을 제안한다. 또한 외부 공격에 의한 오염된 DNS 정보뿐만 아니라 정보 획득 시간이 오래되어 유효하지 않은 DNS 정보의 수정을 위하여 Recursive DNS에서 관리되는 캐쉬 정보에 대한 사후 검증을 통하여 Recursive DNS의 신뢰성을 향상시키는 방법을 제안한다.

• 대한교통학회지
• /
• 제27권6호
• /
• pp.55-67
• /
• 2009

우리나라의 경우 기존에 시행된 대부분의 도로건설사업이 교통수요의 과다 예측으로 인하여 재정의 낭비를 초래하였다. 이 같은 교통수요 예측 오류 발생의 원인은 여러 가지가 있을 수 있지만 사용된 교통기초자료의 낮은 신뢰성과 기관 간 정보연계 미흡을 주요한 원인으로 꼽을 수있다. 이에 본 연구는 대표적 교통기초자료인 국가교통DB와 수도권 가구통행실태는 향후 추진될 도로건설사업계획 수립에 크게 활용될 것이며 이 자료들도 현재 낮은 신뢰성과 기관 간 정보연계 미흡의 문제가 있으므로 개선이 필요하다는 인식하에서 시도되었으며 도로부문 교통기초자료 구축사업의 문제점을 교통수요 예측 관련 자료를 중심으로 살펴보고 개선방안을 제시하고자 하였다.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.417-423
• /
• 2008

For the evaluation in the safety of outdoor insulator, there are various methods such as: visual observation; voltage measurement; use of ultrasonic wave due to partial discharge; electric field measurement; use of infrared/ultraviolet sensor-type camera. However, many problems have been issued regrading the reliability of the evaluation test and safety of testing operation. Accordingly, the present study has investigated and analyzed the characteristics and mechanisms of the insulator deterioration, in order to obtain an optimal method for detecting poor insulator so that the reliability of power facilities can be enhanced. Besides, based on theoretical analysis of domestic and international detection methods for poor insulator, the reliability has been compared and evaluated quantitatively. As a result, it was shown that the corona camera would be the best choice for domestic workplace application in detecting poor insulator for enhancing the reliability of power transmission line.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.235-242
• /
• 2005

This study introduces the Reliability-Based Design Optimization (RBDO) to enhance the kinematic and compliance (K & C) characteristics of automotive suspension system. In previous studies, the deterministic optimization has been performed to enhance the K & C characteristics. Unfortunately, uncertainties in the real world have not been considered in the deterministic optimization. In the design of suspension system, design variables with the uncertainties, such as the bushing stiffness, have a great influence on the variation of the suspension performances. There is a need to quantify these uncertainties and to apply the RBDO to obtain the design, satisfying the target reliability level. In this research, design variables including uncertainties are dealt as random variables and reliability of the suspension performances, which are related the K & C characteristics, are quantified and the RBDO is performed. The RBD-optimum is compared with the deterministic optimum to verify the enhancement in reliability. Thus, the reliability of the suspension performances is estimated and the RBD-optimum, satisfying the target reliability level, is determined.

• Journal of Welding and Joining
• /
• 제29권1호
• /
• pp.46-51
• /
• 2011

TSV technology raises several reliability concerns particularly caused by thermally induced stress. In traditional package, the thermo-mechanical failure mostly occurs as a result of the damage in the solder joint. In TSV technology, however, the driving failure may be TSV interconnects. In this study, the thermomechanical reliability of TSV technology is investigated using finite element method. Thermal stress and thermal fatigue phenomenon caused by repetitive temperature cycling are analyzed, and possible failure locations are discussed. In particular, the effects of via size, via pitch and bonding pad on thermo-mechanical reliability are investigated. The plastic strain generally increases with via size increases. Therefore, expected thermal fatigue life also increase as the via size decreases. However, the small via shows the higher von Mises stress. This means that smaller vias are not always safe despite their longer life expectancy. Therefore careful design consideration of via size and pitch is required for reliability improvement. Also the bonding pad design is important for enhancing the reliability of TSV structure.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 The IMAPS-Korea Workshop 2000 Emerging Technology on Packaging
• /
• pp.55-85
• /
• 2000

MEMS(Micro Electro Mechanical System) technology. MEMS Inertial Sensors promise a new wide market for many areas -Challenge. significant cost reduction by wafer level packaging and testing. decreasing of power consumption by miniaturization. enhancing of performance and reliability. on-chip integration for multiplicity. MEMS is newly emerging technology.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권2호
• /
• pp.108-123
• /
• 2015

Test and Evaluation (T&E) have been verifying the level of it's technological skill and the needed operational status of the development weapons. If the overall spectrum of test and evaluation is fulfilled substantially in the production & deployment, the needed level of the weapon system will be enhanced and also the reliability status will become higher considerably. We can know currently these issues through the mass media and all kinds of the news regarding the defense industry and programs. And so this article have studied the method of enhancing reliability of the test and evaluation, the 6 variables were selected through the discussion of the professional group. The the test and evaluation group needs consistently the professional training systems. After DT&E, we have to the event to verify the technical level of the development systems. We have to take the high level of the kinds of the environmental test. Scientific methods like system engineering will be adapted in process of the test and evaluation. The number of suitable test prototype in the test and evaluation is analysed more systematically. And we need to establish the standardization of the test and evaluation. If 6 variables are well analysed and adapted in the working field, the reliability of the test and evaluation will be considerably, the defense industry will take the chance to develope the future-oriented.