• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.5
• /
• pp.198-201
• /
• 2005

Carbon nanofibers were formed on silicon substrate which was applied by negative direct current (DC) bias voltage using microwave plasma-enhanced chemical vapor deposition method. Formation of carbon nanofibers were varied according to the variation of the applied bias voltage. At -250 V, we found that the growth direction of carbon nanofibers followed the applied direction of the bias voltage. Based on these results, we suggest one of the possible techniques to control the growth direction of the carbon nanofibers.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.948-962
• /
• 2015

The purpose of this study was to inquiry of outcomes and challenges of Meister high school' and specialized vocational high school' teachers and industrial workers on problem solving ability domain of test for enhanced employ ability & upgraded proficiency, and what were outcomes and challenges of main factor by Meister high school and specialized vocational high school' teachers and industrial workers. Research subjects and region were teachers of Meister high schools and specialized vocational high schools in Gyeongsangnamdo and industrial workers in Gyeonggido. The sample(N=147) was drawn from Meister high school' teachers(N=90), specialized vocational high school' teachers(N=25) and industrial workers(N=32), and collected data were analyzed with SPSS using average, standard deviation, cross analysis, verification F. The results are as follows: The biggest outcomes of problem solving ability domain of test for enhanced employ ability & upgraded proficiency was change of educational direction for promoting core competency on specialized high school & Meister High School's students. The biggest positive ripple effects of the outcomes was also change of educational direction for promoting core competency on specialized high school & Meister High School's students. The biggest challenges of problem solving ability domain of test for enhanced employ ability & upgraded proficiency was importance of challenges was expansion of teacher training and lecture on the Test for Enhanced Employ ability & Upgraded Proficiency.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.157-165
• /
• 2015

Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.421-424
• /
• 2016

The purpose of this study is to evaluate an effectiveness of switching turbo direction to improve motion artifacts of small bowels and aorta. From June to October 2015, 60 patients suspected of having Crohn's disease were enrolled. The MR Enterography scans were performed using same protocol other than the turbo direction: with the Z phase encoding (group A) and with Y phase encoding (group B). Qualitative analysis of each group was performed to evaluate the effectiveness of switching turbo direction from Z to Y. As a result, the 5-point Likert scale for paired observers were $2.33{\pm}0.88$ for group A and $3.80{\pm}0.85$ for group B on dynamic contrast enhanced coronal images. In conclusion, group B is proved to be superior to group A and can lessen the motion artifacts derived from phase shifts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.59-62
• /
• 1994

Tact Electrical conductivity. optical absorption spectra of poly(p-phenylene vinylene) and their dependence on stretching are discussed in detail. The conductivity in the parallel direction to the stretching is higher over one order in magnitude than that in the perpendicular direction to the stretching is higher over one order in magnitude than that in the perpendicular direction to the stretching. The photocurrent spectrum for the ligh polarized parallel to the chain direction is much enhanced in lower photon energy compared with that for the light polarized perpendicular to that direction. The result may be originated in the difference of energies which is needed to photogenerate carriers wi th the light polarized parallel and perpendicular to the chain stretched direction.

• Structural Engineering and Mechanics
• /
• v.61 no.4
• /
• pp.551-561
• /
• 2017

As FGM (functionally graded material) bars which vibrate in axial or longitudinal direction have great potential for applications in diverse engineering fields, developing a reliable mathematical model that provides very reliable vibration and wave characteristics of a FGM axial bar, especially at high frequencies, has been an important research issue during last decades. Thus, as an extension of the previous works (Hong et al. 2014, Hong and Lee 2015) on three-layered FGM axial bars (hereafter called FGM bars), an enhanced spectral element model is proposed for a FGM bar model in which axial and radial displacements in the radial direction are treated more realistic by representing the inner FGM layer by multiple sub-layers. The accuracy and performance of the proposed enhanced spectral element model is evaluated by comparison with the solutions obtained by using the commercial finite element package ANSYS. The proposed enhanced spectral element model is also evaluated by comparison with the author's previous spectral element model. In addition, the effects of Poisson's ratio on the dynamics and wave characteristics in example FGM bars are numerically investigated.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.1
• /
• pp.47-55
• /
• 2000

In this paper, a vision-based roadway detection algorithm for an automated vehicle control system, based on roadway sign information on roads, is proposed. First, in order to detect roadway signs, the color scene image is enhanced under hue-invariance. Fuzzy logic is employed to simplify the enhanced color image into a binary image and the binary image is morphologically filtered. Then, an effective algorithm of locating signs based on binary rank order transform (BROT) is utilized to extract signs from the image. This algorithm performs better than those previously presented. Finally, the inner shapes of roadway signs with curving roadway direction information are recognized by neural networks. Experimental results show that the new detection algorithm is simple and robust, and performs well on real sign detection. The results also show that the neural networks used can exactly recognize the inner shapes of signs even for very noisy shapes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.393-395
• /
• 2005

Super In Plane Switching (S-IPS) technology is applied for large TFT-LCD panels used in TV applications. It has a lot of advantages in comparison to the alternative, VA technology. S-IPS shows excellent viewing angle properties and fast response time between intermediate gray levels. If the performance parameters which describe the actual visual performance are considered, S-IPS is much more $advantageous.^{1)}$ However, it shows relatively low contrast ratio in diagonal direction compared to viewing angle characteristic in upper/down direction in S-IPS. In order to compensate the relatively low diagonal contrast ratio, Super-IPS applying for optical film developed, but Super-IPS still has the problem of color shift in black $pattern.^{2)}$ So we improved this problem by developing Enhanced Super-IPS.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.243-248
• /
• 2004

Automatic fingerprint identification is a process of direction extraction, binarization, thinning, minutiae extraction of fingerprint identification. In this process, binarization after direction extraction affects a process of thinning and minutiae extraction. The fasle binarization is increased the false minutiae extraction rate. In this paper, we proposed more exact minutiae extraction algorithm with more enhanced binarization method, compared with traditional binarization process. We could have more enhanced results by using the direction and the half distance between ridges as the threshold of binarization process. In an experiment, Fingerprint images from NIST DBI are tested and the result shows that the proposed binarization algorithm increases minutiae extraction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.92-92
• /
• 2009