• Journal of the Korean Institute of Gas
• /
• v.18 no.1
• /
• pp.46-51
• /
• 2014

The purpose of this paper is to study of the vehicle lamp manufacturing system composing ultrasonic waves connection process. Making lamp assembly plant, it was produced in the separate process as the injection molding, ultrasonic waves bonding, annealing in the constant temperature, lamp assembling and packing. But the improvement method producing the lamp was added with one-step process by one automation technique. As a result, welding with ultrasonic waves process, the method decreased the energy consumption and noise during ultrasonic waves welding. Therefore, this method used the mathematics modeling for checking validity, it selected the stability and suitable controller using transfer function of plant and bode chart. In this study, the $180^{\circ}$ revolution control system to turn injection part upside down was $M_{eq}\;lcos{\theta}(t)$ because of gravity influence. It effected to unstable condition a system. For solving this problem, it aimed the linearization and stabilization of system by elimination $M_{eq}\;lcos{\theta}(t)$ as applying Free-forward control technique.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.65-78
• /
• 2007

The pollutants (Rn, CH, CO, HS, radioactive gas from radiolysis) were generated from the process of construction and operation of underground repository, and after disposal of low-intermediate radioactive waste inside there must be controlled by a ventilation system to distribute them in area where enough air is supported. Therefore, a suitable technical approach is needed especially at an underground repository that is equipped with many entry tunnels, storage tunnels, exhaust-blowing tunnels, and vertical shafts in complicated network form. For the technical approach of such a ventilation system, WIPP (Waste Isolation Pilot Plant) in U. S and SFR (Slutforvar for Reaktorafall) low-intermediate radioactive waste repository in Sweden were selected as the models, for calculating the required air quantity, organizing a ventilation network considering cross section, length, surface roughness of the air passage, and describing a calculation of resistance of each circuit. Based on these procedures, a best suited ventilation system was completed with designing proper capacity of fans and operating plan of vertical shafts. As a result of comparing the two repositories based on the geometry dimensions and ventilation facility equipment operation, more parallel circuit as in WIPP, brought decrease in resistance for entire system leading to reduce of operating costs, and the larger cross-sectional area of the SFR, the greater the percentage of disposal capacity. Accordingly, the mixture of parallel circuit of WIPP repository for reducing resistance and SFR repository formation for enlargement of disposal capacity would be the most rational and efficient ventilation system.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.97-104
• /
• 2010

At present, the biological nutrient removal (BNR) process for removal of nitrogen and phosphorus is being constructing to keep pace with the reinforced standard of effluent quality and the traditional activated sludge process of preexistence is being promoting to retrofit. At the most case of retrofitting, processes are subjected to be under consideration as alternative BNR process for retrofitting. However, process evaluation methods are restricted to compare only treatment efficiency. Therefore, when BNR process apply, process evaluation was needed various method for treatment efficiency as well as sludge production and aeration cost, and all. In this study, the evaluation method of alternative process was suggested for the case for retrofitting S wastewater treatment plant which has been operated the standard activated sludge process. Three BNR processes for evaluation of proper alternatative process were selected and evaluated with suggested method. The selected $A^2$/O, VIP and DNR processes were evaluated using the mathematical model which is time and cost effective as well as gathered objective evaluation criteria. The evaluation between 5 individual criteria was possible including sludge production and energy efficiency as well as treatment performance. The objective final decision method for selection of optimal process was established through the fuzzy inference.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.120-125
• /
• 2015

With rapid urbanization, the volume of traffic in urban area has been significantly increased. This in turn led to problem which can be described as Road Traffic Noise. Currently, to alleviate the road traffic noise damage, a demand for installation of soundproofing walls is rising. Among different shapes of soundproof walls being installed, the reflection-type acoustical insulation panel is highly drawing attentions of residents due to the fact that it does not obstruct their field of vision in contrast with the opaque acoustical insulation panel. On the other hand, improving the soundproofing wall of the reflection-type acoustical insulation barrier panel needs to be focused on since it has a possibility to cause a secondary damage by reflected sounds. Therefore, in this research, study has been carried out to improve the forms in order to minimize travelling of reflected sounds through changing the frontal surface shape and geometrical shape of the reflection-type soundproofing panel. A result from comparison between the normal reflection-type soundproofing panel and the improved soundproofing panel, with reduction effects in the noise reflection, showed that the curved type of soundproofing panel has an impact on reducing the noise up to 1.5 dB. Furthermore, from the research conducted, it appears that the increase and decrease in the reflected sounds can be changeable depending on various design factors. Thus, it turns out that the study shows a potential possibility to develop a reduction technology of the reflected sounds pertaining to overall condition on the soundproofing walls.

• Korean Journal of Plant Resources
• /
• v.29 no.2
• /
• pp.235-240
• /
• 2016

Factors affecting germination of seeds in the forms of various environment and chemical compounds. The present study was aim to produced effective seed propagation method of Astilbe koreana (Kom.) Nakai which had expected high value for the cut flower, ornamental and pharmaceutical material. Seed width and length ranged 0.62, 2.22 ㎜, respectively, and weight of thousand seeds was 40.5 ㎎. As result of imbibition test, showed moisture content of fresh seed (2.57%) increased rapidly by water-soaking treatment under 24 hours, recording to maximum value of 29.8%, and expansion of the seed coat was observed. Seed germination was the best at 15℃ and light conditions (40.8%) among temperature and light conditions treated. Percent germination of seeds was improved under the low (15, 20℃) than high temperature (25, 30℃). In addition, the seed was not germinated at dark condition regardless of temperature. Seeds of A. koreana thus seemed that it had low temperature germinability conditions. To improve germination rate, seeds were submerged in various concentrations of growth regulators such as GA₃ and kinetin, and minerals as KNO₃ and KCl. As a results, KNO₃ treatment, regardless of concentrations, promoted germination compared to control. Especially, percent of germination (77.8%), germination energy (96.1%), mean germination time (11.3 days) and T₅₀ (6.5 days) were effectively improved by treatment of KNO₃ 20 mM.

• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.139-159
• /
• 2014

This study problematizes the dominance of developmental state theory and its negative influences in the field of Korean studies, in particular, dealing with the industrialization during the developmental era, 1960s~70s. As is generally known, the theory has been in a position of unchallenged authority on the industrialization experience of East Asian countries, including South Korea. However, at the same time, it has also misled us into overlooking strategic relations that had articulated the state forms at multiple scales. This study aims to reconstruct the historical contexts by the theorizing prompted by recent work on state space. I shed light on the multiscalar strategic relations that had shaped the Ulsan refinery plant as a representative state space of the South Korean industrialization during two decades after liberation. Specifically, the study illustrates the features and roles of Cold War networks and multiscalar agnets such as Nam Goong-Yeon. By identifying the plant as a result of sequential articulations between Ulsan and other scales, this study concludes by suggesting to reframing the strategic relational spaces, beyond the view of methodological nationalism, in the perspective of multiscalar approach.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.263-271
• /
• 2011

Rice is one of the most important food crops since it is consumed by approximately 60% of the world's population. The most abundant component of rice grain is starch that is an important source of energy. The second abundant component is protein, which is an important protein source for people in many developing countries that rarely take animal protein. However, the rice protein lacks the essential amino acid lysine. Therefore, nutritional improvement in the essential amino acid composition of rice proteins is required. On the other side, rice grain has attracted attention as a diet and health food in developed countries, because its proteins have superior physiological and food processing properties. Thus, nutritional improvements in rice seed proteins by changing amino acid composition or introducing an useful protein or peptide have been studied. This review aims at assessing the current research status of biosynthesis, accumulation, genetic improvement of seed storage proteins by mutation or genetic engineering in rice.

• Korean Journal of Plant Resources
• /
• v.29 no.5
• /
• pp.564-573
• /
• 2016

This research was performed to develop mass propagation method of round-leaved sundew (Drosera rotundifolia L.) for improving horticultural usefulness. Seeds were collected around Hwaseong-si, Gyeonggi-do in October of 2011 and experimented upon while being dry-stored at 4 ± 1.0℃ (darkness). Seed length of a major and minor axis were 1.58 ± 0.060 and 0.21 ± 0.016 ㎜, respecrively, and weight of 1,000 seeds was 6.24 ± 0.172 ㎎. Seeds were thus classified as ‘dwarf seeds’. Regarding the dormancy type, since round-leaved sundew seeds were dormancy broken and germinated at 20~30℃ under the light condition after wet-chilling treatment for 12 weeks, seeds were estimated to have physiological dormancy. Germination conditions of dormancy broken seeds were found to be 20℃ and light condition (54.7%), but germination decreased at higher temperature. Percent germination (PG), germination energy (GE), mean germination time (MGT) and T₅₀ were effectively improved by chemical treatment such as GA₃ 200 ㎎/L + kinetin 20 ㎎/L and wet-chilling treatment for 14 weeks. In conclusion these optimal conditions were thought to be a useful method for raising seedling uniformly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.12-18
• /
• 2005

This study was carried out to evaluate anthocyanine contents, effective components and major botanical characteristics of the new developed colored rices. Characteristics of colored rice lines showed variation in culm length and spikelets per panicle in CNU39, panicle length in CNU43, 1,000 grain weight in CNU90, and yield per plant in CNU119 were highly compared to the Check, Heugjinjubyeo. Relative optical density(ROD) of Heugjinjubyeo was the highest at 530 nm, followed by CNU71, CNU73 and CNU119. The high peaks of ROD of Heugjinjubyeo and CNU71 appeared at 280 nm and 530 nm, and that of CNU43 appeared at 430 nm. The relative anthocyanin contents (RAC) per plant of the CU 71 among the new developed rice compared by yield per unit area was very high, fellowed by CNU73 and Heugjinjubyo.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2007

In view of energy supply, biogas can be seen as alternative fuel by substituting considerable amount of fossil fuel and may be utilized for heat and power production or for transport fuel production ($CH_4-enriched$ biogas). The aim of this research is to analyse the emission of $NO_x$ and CO from biogas fired combustion engine for electric power production. The result indicate a significant effect of biogas composition ($CH_4-CO_2$ ratio) and biogas flow rate on the air pollutants emission. The emission factors from this study were compared with those of U.S. EPA. Low $CH_4-CO_2$ ratio condition typically shows the lower $NO_x$ and CO emission than higher $CH_4-CO_2$ ratio condition. At normal $CH_4-CO_2$ ratio (7:3) emission factors of $NO_x$ and CO were 1.29 and 30.43 g/MMBtu, respectively. At low $CH_4-CO_2$, ratio (6:4) emission factors of $NO_x$ and CO were 0.646 and 60.86 g/MMBtu, respectively, It should be emphasized that the actual emission may vary considerably from these results due to operating conditions including torque load and engine speed.