• Environmental Engineering Research
• /
• 제16권1호
• /
• pp.19-27
• /
• 2011

This paper introduces an approach to identify the total energy consumption with subsequent $CO_2$ emissions, for both industrial and non-industrial sectors. Statistical data for 2005 were compiled in a national account system to construct an energy input-output table for investigating the influence between energy demand and supply activities. The methodological approach was applied to South Korea. Twelve types of energy and fifteen industrial and non-industrial sectors are formed as the compartments of the input-output table. The results provided quantitative details of the energy consumption and identified the significant contributions from each sector. An impact analysis on the $CO_2$ emissions for the demand side was also conducted for comparison with the supply side.

• 신재생에너지
• /
• 제8권1호
• /
• pp.8-17
• /
• 2012

The Korean government pushed ahead various policies to disseminate photovoltaic (PV), wind power, small hydro, bio-fuel, etc. Renewable energy system (RES) budget of the Korean government increased from 118 billion won of 2003 to 876.6 billion won of 2010. The R&D budgetary supports for RES increased by 6.8 times in the period 2003-2010. It is necessary to confirm RES budget expenditure that renewable energy promotion policy makes good performance evaluated in quantity level. This paper made Input-Output Table 2009 contains photovoltaic power generation equipment industry as a dependent sector and analyzed induced production effect by demand of photovoltaic power generation equipment industry. From the empirical analysis result, additional demand in photovoltaic power generation equipment induced 1.932 times of induced production in Korea. Each of industry sector has positive induced production from the additional demand in photovoltaic power generation equipment. Renewable energy promotion in photovoltaic power generation is considered together with industry policy as the option to sustain economic growth.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.473-481
• /
• 2007

Energy efficiency is one of the most critical concerns for wireless sensor networks. By allowing sensor nodes in close proximity to cooperate in transmission to form a virtual multiple-input multiple-output(MIMO) system, recent progress in wireless MIMO communications can be exploited to boost the system throughput, or equivalently reduce the energy consumption for the same throughput and BER target. However, these cooperative transmission strategies may incur additional energy cost and system overhead. In this paper, assuming that data collectors are equipped with antenna arrays and superior processing capability, energy efficiency of relevant traditional and cooperative transmission strategies: Single-input-multiple-output(SIMO), space-time block coding(STBC), and spatial multiplexing(SM) are studied. Analysis in the wideband regime reveals that, while receive diversity introduces significant improvement in both energy efficiency and spectral efficiency, further improvement due to the transmit diversity of STBC is limited, as opposed to the superiority of the SM scheme especially for non-trivial spectral efficiency. These observations are further confirmed in our analysis of more realistic systems with limited bandwidth, finite constellation sizes, and a target error rate. Based on this analysis, general guidelines are presented for optimal transmission strategy selection in system level and link level, aiming at minimum energy consumption while meeting different requirements. The proposed selection rules, especially those based on system-level metrics, are easy to implement for sensor applications. The framework provided here may also be readily extended to other scenarios or applications.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.73-76
• /
• 2009

LCA is nowadays getting popular as a tool to assess the environmental impacts. We can assess the environmental impacts of products and also compare the environmental performance between products with LCA. Furthermore, the LCA results can be used for designing eco-friendly products. But LCA needs an enormous amount of data collection, calculations of energy and material balance. which required to spend pretty much time and cost. However, If we use Input-Output Analysis, There is a lot of advantages that we can save time and cost to calculate and also analyze energy-material balance more comprehensively. Therefore, we implemented the fundamental research of the environmental impact assessment on railway system using life cycle inventory analysis and Input-Output Analysis method.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1619-1626
• /
• 2018

The output power of most facilities for renewable energy generation is unstable due to external environmental conditions. In distributed power systems with two or more sources, a stable output can be achieved with the complementary power supply among the different input sources. In this paper, a double-input DC-DC converter with a wide-input-voltage-range is proposed for renewable energy generation. This converter has the following advantages: the circuit is simple, and the input voltage range is wide and the fault tolerance is excellent. The operation modes and the steady-state analysis are examined. Finally, experimental results are illustrated to verify the correctness of the analysis and the feasibility of the proposed converter.

• 한국기후변화학회지
• /
• 제7권1호
• /
• pp.59-68
• /
• 2016

The world's major countries have focused on the renewable energy industry as the solution to climate change and the energy crisis. Nevertheless, there are no studies on the economic effects of the renewable energy industry. This study analyzed the economic effects of Korea's renewable energy industry by using the 2010 Input-Output Table. It is estimated that Korea's renewable energy industry made a production-induced effect of 2.0262 won, and a value-added-induced effect of 0.6138 won through an increase in output growth of 1 won, and an employment-induced effect of 2.3046 labors through an increase in output growth of 1 billion won. Both the effect ratio and the response ratio were greater than 1, which means the renewable energy industry is an intermediate manufacturing industry whose forward linkage effect and backward linkage effects are large. These results show differences with previous studies that classified electricity sector and renewable energy industry into final primary production industries. It is expected that the economic effects of the renewable energy industry will become greater in the future. Therefore, research on statistics related to the renewable energy industry is needed for more precise analysis.

• 한국수소및신에너지학회논문집
• /
• 제34권5호
• /
• pp.398-412
• /
• 2023

The Korean government is actively promoting the hydrogen industry as a key driver of economic growth. This commitment is evident in the 2019 hydrogen economy activation roadmap and the 2021 basic plan for hydrogen economy implementation. This study quantitatively analyzes the economic impact of the hydrogen economy using input-output analysis based on the Bank of Korea's 2019 input-output table, projecting its size by 2050. Four parts dealt with production-inducing, value-added creation, employment-inducing, and wage-inducing based on a demand-driven model. The results reveal that transportation had the most remarkable economic effect throughout the hydrogen economy, and production was the least. The hydrogen economy is projected to reach 71.2 trillion won by 2050.

• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.410-416
• /
• 2008

본 연구에서는 '2003년 산업연관표'를 사용하여 우리나라의 철도운송산업이 국내 운송산업 전체에서 차지하는 위상 및 철도운송산업과 여타산업의 관계적 특징에 대하여 살펴보았다. 그리고 산업연관분석 연구방법을 사용하여 국내 철도운송산업의 생산활동이 403개 여타 기본산업에 미치는 경제적 파급효과에 대해서 분석하였다.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.247-255
• /
• 2011

한국은행에서 2000년도에 발행된 산업연관표를 적용한 주요 건축자재의 에너지소비량과 $CO_2$ 배출에 대한 원단위 DB는 있지만 2005년, 2007년에 발행된 산업연관표를 이용한 원단위 DB는 없는 실정이다. 본 연구에서는 최근에 발행된 2005년, 2007년도 산업연관표를 이용하여 주요 건축자재에서 발생되는 에너지소비량 및 $CO_2$ 배출 원단위 값을 산정하고자 한다. 주요 건축자재의 에너지소비량 및 $CO_2$ 배출원단위 산출을 위한 방법은 산업연관표를 이용한 DB 구축 방식을 바탕으로 산출하였으며, 건설현장에서 주로 사용되는 16가지의 건설자재는 선별하여 적용하였다. 기존 연구결과에서 제시한 2000년도 산업연관표를 적용하여 산출된 원단위 DB 값과 비교한 결과 근소한 차이를 보이고 있어 본 연구의 산출방법이 적정한 것으로 판단하였다. 2005년, 2007년도 산업연관표를 이용하여 산출한 에너지소비량과 $CO_2$ 배출 원단위 값은 감소세를 보이고 있는 것으로 나타났으며, 시멘트와 철근을 주원료로 하는 자재에서 가장 많은 에너지소비량 및 $CO_2$ 배출 원단위 값을 나타났다. 본 연구의 결과를 통해 국내 실정에 적합한 건설자재 생산단계에서 발생되는 환경부하의 간접적인 예측이 가능할 것으로 사료된다.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.57-62
• /
• 2016

Purpose: A lot of active researches have addressed the impact of a building on global environment, but most of the researches focus on a residential building and a large office building. Hereupon, this study assessed the impact on environment quantitatively through the analysis of input materials targeting a school building. Method:This study calculated embodied energy of input materials suggested in a construction statement on a school building using the input-output analysis. This study finally carried out environmental impact assessment by applying LCIA DB shown in the preceding researches to the calculated embodied energy. Result: The analysis result revealed that the environmental impact per unit area(/$m^2$) at a school building was $4.11E-02PE{\cdot}yr$, among which Construction was found to be $3.59E-02PE{\cdot}yr$, being analyzed to account for about 87% of the total environmental impact. Also, as a result of detailed environmental impact, the impact on global warming among the total environmental impact was analyzed to be high, accounting for about 76%.