• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2373-2379
• /
• 2023

In sodium systems, leakage is one of the safety concerns; it can cause chemical reactions, which may result in fires. There are contact and non-contact types of leak detectors, and the conventional method of non-contact type detection is by gas sampling. Because of the complexity of this method, there has always been a need for a simple gas sensor, and the resistive-type nanostructure ZnO sensor is a promising option with various advantages. In this study, a ZnO sensor was fabricated, and the concept was tested as a leak detector using a dedicated experiment facility. The experiment results showed distinctive changes in resistance with the presence of sodium aerosol under various conditions. Replacing the conventional gas sampling with the ZnO sensors is expected to enable identification of the leakage location if used as a point-wise instrumentation and to greatly reduce the total cost, making the system simple, light, and effective. For further study, more tests will be performed to evaluate the sensitivity of key parameters under various conditions.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.1087-1088
• /
• 2004

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.65-65
• /
• 2001

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.3018-3025
• /
• 2021

The authors developed a volumetric dosimetry detector system using in-house 3D-printable plastic scintillator resins. Three tumor model scintillators (TMSs) were developed using magnetic resonance images of a tumor. The detector system consisted of a TMS, an optical fiber, a photomultiplier tube, and an electrometer. The background signal, including the Cherenkov lights generated in the optical fiber, was subtracted from the output signal. The system showed 2.1% instability when the TMS was reassembled. The system efficiencies in collecting lights for a given absorbed energy were determined by calibration at a secondary standard dosimetry laboratory (k_SSDL) or by calibration using Monte Carlo simulations (k_sim). The TMSs were irradiated in a Gamma Knife® Icon^TM (Elekta AB, Stockholm, Sweden) following a treatment plan. The energies absorbed to the TMSs were measured and compared with a calculated value. While the measured energy determined with k_SSDL was (5.84 ± 3.56) % lower than the calculated value, the energy with k_sim was (2.00 ± 0.76) % higher. Although the TMS detector system worked reasonably well in measuring the absorbed energy to a tumor, further improvements in the calibration procedure and system stability are needed for the system to be accepted as a quality assurance tool.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1091-1097
• /
• 2019

After the Fukushima accident in 2011, there has been increased public concern about radioactive contamination of water resources through fallout in neighboring countries. However, there is still no available initial response system that can promptly detect radionuclides. The purpose of this research is to develop the most efficient gamma spectrometer to monitor radionuclides in an aquatic environment. We chose a thallium-doped sodium iodide (NaI(Tl)) scintillator readout with a silicon photo multiplier (SiPM) due to its compactness and low operating voltage. Three types of a scintillation detector were tested. One was composed of a scintillator and a photomultiplier tube (PMT) as a reference; another system consisted of a scintillator and an array of SiPMs with a light guide; and the other was a scintillator directly coupled with an array of SiPMs. Among the SiPM-based detectors, the direct coupling system showed the best energy resolution at all energy peaks. It achieved 9.76% energy resolution for a 662 keV gamma ray. Through additional experiments and a simulation, we proved that the light guide degraded energy resolution with increasing statistical uncertainty. The results indicated that the SiPM-based scintillation detector with no light guide is the most efficient design for monitoring radionuclides in an aquatic environment.

• 한국의학물리학회지:의학물리
• /
• 제21권1호
• /
• pp.93-98
• /
• 2010

본 연구에서는 I-125 (35 keV) 와 Tc-99m (140 keV)에 대해 고해상도를 지닌 SPECT 영상을 동일한 검출기로 획득하는 방법을 제시하였고, 이를 몬테칼로 시뮬레이션 코드인 DETECT2000과 GATE를 이용하여 검증하였다. 제안된 검출기는 두께 3.0 mm의 CsI (Tl) 블록형 섬광체와 하마마츠사의 H8500C PSPMT로 이루어져 있다. 35 keV 감마선을 방출하는 I-125 핵종을 영상화할 때는 두꺼운 섬광체를 사용 할 경우, 일반적인 앵거방법으로는 빛 퍼짐이 많아지기 때문에 내인성 공간분해능이 저하되지만, 최대우도 함수와 색인테이블을 사용하여 감마선 반응 위치를 추적하면 내인성 공간분해능을 향상시킬 수 있다. DETECT2000 시뮬레이션 결과 1.0 mm 이내의 내인성 공간분해능을 획득하였다. 140 keV를 방출하는 Tc-99m를 영상화할 경우에는 I-125 전용인 1.0 mm 두께의 섬광체를 사용하였을 경우보다 3.0 mm 두께의 섬광체를 사용하였을 때 2.3배 이상 향상된 민감도를 보였다. 본 연구에서 제안한 검출기의 장점은 저에너지의 I-125 선원에 대해 상대적으로 두꺼운 섬광체를 사용하더라도 최대우도함수를 사용하기 때문에 분해능의 감소가 없다는 점과 Tc-99m 선원에 대해 민감도의 저하가 적다는 점이다. 본 연구에서 제안한 검출기를 사용하면 고에너지와 저에너지를 가진 핵종을 모두 영상화할 수 있다.

• Journal of Radiation Protection and Research
• /
• 제35권2호
• /
• pp.77-80
• /
• 2010

The spectroscopy toolkit has been developed and tested. The toolkit consists of a CsI(Tl)/PIN diode detector, integrated electronics, and a multi.channel.analyzer and its size was 40 cm(width) by 20 cm(length) by 6 cm(high). It is compact, very portable and simpler and cheaper compared to the conventional spectroscopy system. The gamma energy resolutions of the toolkit were 7.9% for the 660 keV of $^{137}Cs$ and 4.9% for 1,332 keV of $^{60}Co$ respectively. The linearity for gamma energies was good. When the energy spectrum of a ceramic sample containing $^{232}Th$ was measured with the spectroscopy toolkit for 20 minutes, there were significant peaks of the heavy metal. These results show that the resolution of the spectroscopy toolkit is sufficient to accumulate a quality spectrum in a few minutes by using weak, encapsulated commercial sources. Furthermore a toolkit experiment that how to measure energy spectra using the toolkit, and how to identify specific isotopes in a pottery piece, could be widely adopted for education and even for more sophisticated and higher level experiments.

• 한국의학물리학회지:의학물리
• /
• 제25권2호
• /
• pp.95-99
• /
• 2014

병원을 포함해서서 방사선 물질을 사용하는 모든 사업장에서 방사선 물질의 모니터링은 방사선 안전에 가장 중요한 요소의 하나이다. 본 연구는 방사선 모니터링 시스템에 있어서 GEM 검출기의 활용 가능성을 알아보기 위한 선행 연구로서, GEM 검출기를 제작하고 CdTe 검출기와의 상대적 효율을 구한 결과, 베타와 감마선에 대한 평균 상대 효율이 각각 72%와 4%로서 매우 우수한 성능을 나타냄을 보였다.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.841-845
• /
• 2020

An airborne alpha beta detection system using passivated implanted planar silicon (PIPS) detector was modeled with the MCNP6 code and its resolution and detection efficiency were analyzed. Simulation of the resolution performed using the Gaussian energy broadening (GEB) function showed that the full width at half maximum (FWHM) of 35.214 keV for alpha particles was within 34-38 KeV, which is the FWHM range of the actual detector, and the FWHM of 15.1 keV for beta particles was constructed with a similar model to 17 keV, which is the FWHM range of an actual detector. In addition, the detection efficiency and the resolution were simulated according to the distance between the detector and the air filter. When the distance was decreased to 0.2 cm from 0.8 cm, the efficiency of the alpha and beta particles detection decreased from 5.33% to 4.89% and from 5.64% to 4.27%, respectively, and the FWHM of the alpha and beta particles improved from 40.9 KeV to 29.84 keV and 25.76 keV-13.27 keV, respectively.

• 전자공학회논문지 IE
• /
• 제43권2호
• /
• pp.75-79
• /
• 2006

블라인드 기법은 훈련열 없이 검출하고자 하는 사용자의 최소한의 정보만을 가지고 정보 검출이 가능한 방법이다. 본 논문에서는 직접 대역 확산 코드 분할 다중 접속 시스템에서 다중사용자 간섭을 제거하기 위해서, 혼합된 비용함수를 사용하는 블라인드 다중사용자 검출기를 제안하였다. 제안된 블라인드 다중사용자 검출기의 비용함수는 LMS와 LMF를 혼합한 형태로 이루어져있으며, 제안된 다중사용자 검출기의 성능을 평가하기 위해서 가우시안 채널 하에서 BER을 비교 하였다. 모의실험 결과, 사용자가 20 명 존재하는 경우, 제안된 블라인드 검출기가 블라인드 MOE 다중사용자 검출기에 비해 약 3dB정도 더 나은 성능을 지님을 확인 할 수 있었다.