• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.404-410
• /
• 2002

Dynamic compaction is an efficient ground improvement technique for loose soils and waste landfill. The improvement is obtained by controlled high energy tamping and its effects vary with the soil properties and energy input. This study demonstrated the application of dynamic compaction method for the improvement of waste landfill in construction site. Various tests and measurements such as standard penetration test, bore hole loading test, crater settlement, ground settlement, pore water pressure were peformed during dynamic compaction field test. From the field test results, the efficiency of dynamic compaction method for the improvement of waste landfill was proved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.696-703
• /
• 2005

Since most autonomous mobile robots are powered by a battery, it is important to increase the continuous operating time without recharging. This can be achieved by improving the energy efficiency of a mobile robot, but little research on energy efficiency has been performed. This paper proposes two methods for improving the energy efficiency of an omnidirectional mobile robot.. One method is to realize a continuously variable transmission (CVT) by adopting the mechanism of steerable omnidirectional wheels. The other is the proposed steering algorithm in which wheel arrangement of the mobile robot is continuously adjusted so as to obtain the maximum energy efficiency of the motors during navigation. In addition, new omnidirectional wheels which can be transformed to the conventional wheels depending on the driving conditions are proposed to compensate for less efficient omnidirectional drive mode. Various tests show that motion control of the OMR-SOW works satisfactorily and the proposed steering algorithm for CVT can provide higher energy efficiency than the algorithm using a fixed steering angle. In addition, it is shown that the differential drive mode can give better energy efficiency than the omnidirectional drive mode.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.522-528
• /
• 2012

Currently, the energy consumption of electric lighting in an office building is accounted for more than 30% of the total energy consumption. In order to reduce the energy consumed by the indoor lighting, the daylight as a natural energy resource can play an important role in energy savings. The daylight can have positive impacts on improvement of work efficiency and productivity, and also make people feel more psychologically stable. Moreover, by using the daylight, we can definitely reduce the energy consumption in office buildings. Thus, the purpose of this study is to determine the LED dimming ratio depending on the ratio by calculating the amount of artificial illumination required according to the change of daylight by using the light simulation software that can quantify and visualize the performance of daylight. As a result, the energy savings could be obtained up to 30%.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.99-105
• /
• 2012

ZigBee is the low power, low cost and low data rate wireless personal area network(LR-WPAN) standard. The Directed-Messaging is the protocol which improves the energy efficiency through reducing the redundant message transmission by transmitting messages with directional information toward the specified sub-network area in wireless sensor network using broadcasting. In this paper, we design and implement the experimental grid sensor network using ZigBee modified by the Directed-Messaging for the energy efficiency improvement. The experimental sensor network in this paper is configured with Nano24 supporting the ADV message and the routing management module modified to use the directional information. The energy efficiency improvement of the experimental sensor-network by evaluating the experimental results according to transmitting ADV message.

• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.99-117
• /
• 2009

Energy is essential factor of production for a firm to produce goods and services. If so, what is the condition of maintaining profit of a firm when energy price is going up? In conclusion, the condition is that the rate of productivity improvement should be greater than the rate of energy price increase. To put this concretely, when the elasticity of energy price as to the productivity improvement is greater than the weight of the energy cost on to the total revenue of the firm, the firm can escape the negative effect of energy price increase. This is that, saying that once more, the firm have to reduce the energy cost or promote energy efficiency to maintain appropriate or sufficient profit when energy price is going up fast. Therefore, in this study we will analyze the effect of the oil price increase on the energy saving investment and that of energy saving investment on the energy efficiency in the field of Korean manufacturing industry. In doing so, this study could show that the effect of energy price increase on the energy efficiency of the firm and the factor of that mechanism.

• Journal of Navigation and Port Research
• /
• v.40 no.4
• /
• pp.165-171
• /
• 2016

SEEMP (Ship Energy Efficiency Management Plan) has entered into force since 2013 for the reduction of GHG emission of operating ships. SEEMP guidelines include the hardware modification or installation of energy-saving device on ship. It also includes software based energy-saving technology such as optimum routing, speed optimization, etc. Hardware based technologies are not easy to apply to ongoing vessel due to the operational restriction. Therefore, IT based energy-saving technology was applied and its energy efficiency was evaluated using before and after energy-saving system applied voyage data. SEEMP advises a voluntary participation of EEOI (Ship Energy Efficiency Operation Indicator) use as an indicator of ship energy efficiency operation, and those results were also shown to evaluate the improvement efficiency of energy-saving system.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.721-725
• /
• 2001

The main reason for applying pulverizer classifier-rotary type in fossil power plant is boiler high efficiency and energy saving movement in the government. This study intends to analyze the boiler efficiency through the pulverizer classifier-rotary type improvement in thermal power plant and makes its comparison to that of the used fixed type.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.715-720
• /
• 2001

The main reason for applying positive pressure variable clearance packing in fossil power plant is high efficiency and energy saving movement in the government. This study intends to analyze the turbine efficiency through the shaft packing improvement in thermal power plant and makes its comparison to that of the used packing.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2001.11a
• /
• pp.177-182
• /
• 2001

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.05a
• /
• pp.165-170
• /
• 2004