• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.93-101
• /
• 2006

This study examined whether there is a transfer effect to other joint angles and the angular specificity of muscle fatigue after 6 weeks of isometric training of the vastus medialis. Twenty subjects were randomly assigned to 30° and 90° knee flexion groups and were trained at 80% maximal voluntary isometric contraction(MVIC) three times a week for 6 weeks. The pre-and post-training values of the 80% holding time(endurance time) of MVIC, the Fatigue Index(FI), and the MVIC at 30°, 60°, and 90° were compared. After isometric training for 6 weeks, in the 30° knee flexion group, FI decreased significantly(p<0.05) only at 30°, which was the training angle; there was no change at other angles. By contrast, in the 90° knee flexion group, FI decreased significantly(p<0.05) at both the trained angle and at the other angles, indicating a transfer effect of training. MVIC did not increase significantly(p<0.05) at any trained angle in either the 30° or 90° knee flexion groups after 6 weeks of isometric training, neither did the 80% holding time of MVIC differ significantly compared with pre-training in either group. These findings suggest that training at 90° of knee flexion is more effective than training at 30° of knee flexion for obtaining a training transfer effect on muscle fatigue in the vastus medialis.

• Journal of Practical Engineering Education
• /
• v.8 no.1
• /
• pp.9-14
• /
• 2016

Depending on the college graduation project and graduation thesis regulations for the certification and graduation requirements, the quadcopter acting as a Li-Po battery that charges by solar energy are proposed a design method and improvements in theory. Quadcopter posture is balanced and confirmed by the position sensor, through a PID (Proportional Integral Differential) control. Battery switching circuit is composed of two Li-Po battery. Driving the quadcopter as one battery, and does not use other battery is charged by solar energy. A battery switching circuit is fabricated in a manner that uses two types of relays. Even if completely not charged to the battery is being driven a certain switch by the battery charging voltage from time to time, it proposes a method for increasing the endurance time and range.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.1 s.26
• /
• pp.13-26
• /
• 1988

As the culture develops, the body of children nowadays improves, but their physical fitness is weaker than that of children in the past. If physical fitness strengthens through clothing, this must be the easiest and the most efficient long-range training method. To find out the solutions on the above mentioned problems through clothing, this study was made for the analysis of the correlations of clothing weight and physical fitness. The children's endurance upon cold can be explained by the physical fitness, and has relation with the clothing insulation. Therefore, motor ability was measured as an index of physical fitness and clothing weight was measured as an index of insulation. This observation was made in Spring and Fall, 1985, in which 339 kindergartners and their mothers were the subject. The results of the study were as follows: Physical fitness of children decreased in proportion to the clothing weight, and especially this can be seen in boys rather than in girls, and in Fall rather than in Spring. In case of the children who spent more time outdoors rather than indoors, who played in larger space, and who didn't have meat frequently, it turned out that their clothing weight was surprisingly lessened and their physical fitness was highly food.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.433-438
• /
• 2005

Seven commercial lining fabrics normally used in a market were selected: plain-weave fabrics with polyester, nylon, rayon and acetate fiber, and polyester textured yarn, in addition, polyester fabrics with plain, twill and satin weave. Then seam strength, seam efficiency, resistance to slippage of yarns and type of seam destruction were examined related to endurance by textiles in sewing capability of the lining fabrics. In results, as tensile strength was greater, seam strength got greater, which shows tensile strength and seam strength have close relationship. Tensile and seam strength of acetate fabric were the least, but seam efficiency was the greatest. It presents that strong tensile and seam strengths do not show high seam efficiency at the same time. Various types of seam destruction have been shown. When tensile strength of the sewing thread was greater than tensile strength of fabric, fabric destruction was occurred before the sewing thread destruction. When tensile strength of the fabric was greater than seam strength, the sewing thread destruction was occurred. Resistance to slippage of yarns got greater as tensile strength of the fabric got greater. The plain-weave fabric, which tensile strength of fabric was smaller, showed the greater resistance to slippage of yarns than twill and satin weave fabrics. The stretch fabric revealed the optimal lining fabric with the greatest resistance to slippage of yarns.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.337-337
• /
• 2001

High voltage ceramic capacitors are widely applied in power electronic circuits, such as filters, snubbers, and resonant circuits, due to their excellent features of high voltage endurance and low aging. This paper presents a result of failure analysis and reliability evaluation for high voltage ceramic capacitors. The failure nodes and failure mechanisms were identified in order to understand the failure physics in a component. The causes of failure mechanisms for zero resistance phenomena under withstanding voltage test in high voltage ceramic capacitors molded by epoxy resin were studied by establishing an effective closed-loop failure analysis. Also, the condition for dielectric breakdown was investigated. Particular emphasis was placed on breakdown phenomena at the ceramic-epoxy interface. The validity of the results in this study was confirmed by the results of accelerated testing. Thermal shock test as well as pressure cooker test for high voltage ceramic capacitor mounted on a magnetron were implemented. Delamination between ceramic and epoxy, which, might cause electrical short in underlying circuitry, can occur during curing or thermal cycling. The results can be conveniently used to quickly identify defective lots, determine mean time to failure (MTTF) of each lot at the level of Inspection, and detect major changes in the vendors processes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.68-76
• /
• 2015

Phase-change memory (PCM) is a promising technology that is anticipated to be used in the memory hierarchy of future computer systems. However, its access time is relatively slower than DRAM and it has limited endurance cycle. Due to this reason, PCM is being considered as a high-speed storage medium (like swap device) or long-latency memory. In this paper, we adopt PCM as a virtual memory swap device and present a new page replacement policy that considers the characteristics of PCM. Specifically, we aim to reduce the write traffic to PCM by considering the dirtiness of pages when making a replacement decision. The proposed replacement policy tracks the dirtiness of a page at the granularity of a sub-page and replaces the least dirty page among pages not recently used. Experimental results with various workloads show that the proposed policy reduces the amount of data written to PCM by 22.9% on average and up to 73.7% compared to CLOCK. It also extends the lifespan of PCM by 49.0% and reduces the energy consumption of PCM by 3.0% on average.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.1 s.23
• /
• pp.107-113
• /
• 2007

This study investigates the filed application in Daebul Free Trade Zone applying both a flowing method using drying shrinkage-reducing superplasticizer(SRS) and an insulating curing method using double layer bubble sheet. Test results showed that fresh concrete satisfied target slump and air content. A structure adding SRS significantly decreased the total bleeding capacity and accelerated the setting time. As for the crack occurrence, the structure applying the flowing method and double bubble sheets simultaneously exhibited the most favorable crack endurance, while conventional concrete showed more than 1mm size of crack in overall. In addition, a structure applying the flowing concrete method partially presented the micro crack. For the area proportion of crack occurrence, the structure using the double bubble sheets indicated 9.8%, while others applying flowing concrete method was 28%, compared with that of conventional one. For the compressive strength of specimens, standard curing specimens indicated $3{\sim}33%$ higher value than that of specimens cured besides the field construction. The specimens containing SRS improved the strength of $2{\sim}6MPa$, which is $10{\sim}22%$ higher than that of conventional concrete.

• IE interfaces
• /
• v.17 no.1
• /
• pp.46-55
• /
• 2004

Various characteristics of the object being lifted are known to affect the biomechanical, physiological, and psychophysical stresses. The object characteristics to be considered in the design process of lifting tasks are weight, shape, stiffness, and availability of handles and similar coupling devices. In this study, a prototype Polypropylene laminated bag with carrying handles was designed to decrease the physical stress of people who handle these bags. Physiological and psychophysical approaches as well as subjective ratings were applied to evaluate the effects of handles provided on the designed PP laminated bag. Statistical analysis showed that the VO2, heart rate, blood pressure, and Borg-RPE score for PP laminated fertilizer bag with carrying handles were significantly lower than those bags without handles. Moreover, Maximum Acceptable Lifting Endurance Time(MALET) measure, newly developed in this study, for bags with handles was significantly higher than those for bags without handles. It is thus recommended that the various types of bags and boxes be equipped with handles to reduce the musculoskeletal, physiological, psychophysical, and subjective perceived stresses.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.1
• /
• pp.20-25
• /
• 2012

Gender differences have been studied by using spectral features such as median frequency (MDF) respectively. MDF is the most commonly used as a feature to describe muscle conduction velocity. The aim of this paper is to detect gender differences from surface EMG signals during isotonic contractions of the bicep Brachii. Eight volunteers participated in surface EMG recordings placed on the biceps brachii and each recording experiment continued until their exhaustion. We used feature values and regressive slopes and compared the feature changes from the onset to the endurance time to find gender differences. The result of experiments shows that the regressive slope of these features is valid to measure gender differences.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.1
• /
• pp.10-19
• /
• 2008

This paper focuses on the mackerel's visual ability and swimming capability, and aims to describe the behavior in capture and escape process by trawl. The visual sensory systems and reaction behavior based locomotory capability were analyzed and simulated. The ability of fish to see an object depends on the light intensity and the contrast and size of the object. Swimming endurance of the fish is dependent on the swimming speed and the size of the fish. Swimming speeds of the fish are simulated 3 types of the burst speed, the prolonged speed and the sustained speed according to the time they can maintain to swim. The herding and avoiding is typical reaction of the fish to the stimuli of trawl gear in the capture process. These basic behavior patterns of the virtual mackerel to the gear are simulated. This simulation will be helpful to understand the fishing processes and make high selectivity of fishing.