• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.335-340
• /
• 2008

Cutting performance and wear behavior were studied with the diamond micro-blade of Cu/Sn bond materials containing various amount of lubricant materials such as graphite and $MoS_2$. Measurement of instantaneous electric power consumption for cutting glass workpiece at the constant velocity was conducted and proposed as a method to assess cutting efficiency. The energy consumption of micro-blade for glass cutting decreased with the content of graphite and $MoS_2$ while wear amount of blade in volume increased with the amount of lubricant addition during the dicing test. It is because that hardness, flexural strength, and fracture toughness ($K_{IC}$) reduced with the amount of lubricant addition. Blades with $MoS_2$ additive showed higher mechanical properties than those with graphite additives when the same amount of the lubricant additive in wt.% was added. Due to the lower density of graphite than $MoS_2$, higher volume fraction of graphite could result in stronger effect on lowering electric power consumption by reducing the friction between blade and work piece however increasing wear rate due to the reduction in strength and fracture toughness. Adhesive wearing mode of micro blade could be remarkably improved by the addition of graphite as well as $MoS_2$.

• Asian Oncology Nursing
• /
• v.2 no.1
• /
• pp.17-26
• /
• 2002

Purpose: This study was conducted to evaluate the effects of aerobic dance on physical functionnings of women with mastectomy. The study was single group pre- & post-test time series design. The aerobic dance program was performed three times a week for eight weeks, 45${\sim}$60 minutes per session. Method: The research variables used in the study were the period(seconds) of exercise that was taken for target heart rate, activity systolic pressure, range of motion of shoulder joint in affected side, and flexibility for physical functionnings. The data were analyzed with repeated measure ANOVA and Bonferroni multiple comparisons. Results: Over the period of aerobic dance, the degree of all the research variables were changed significantly, and also differed significantly every 2 to 4 weeks. The period(seconds) of exercise that was taken for target heart rate (p <.000), systolic pressure in exercise(p =.019), range of motions of shoulder joint on the affected side(flexion, abduction, over-adduction, over-extension, external & internal rotation), and flexibility(sit & reach, back & reach) (p= .003; p=.001; p(.001; p<.001; p= .014; p<.001; p=.036; p<.001) were differed significantly respectively. Conclusion: The results suggest that the aerobic dance program for women with mastectomy can improve and recover cardiopulmonary endurance and ROM of shoulder joint and that the period of exercise had to be performed over six to eight weeks and three times a week at least.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.166-175
• /
• 2005

Health effects associated with metal working fluid (MWF) exposures include dermatitis, respiratory disease, hypersensitive pneumonitis, and asthma. Frequently, occupational exposures to MWFs are controlled by ventilating an enclosure with an air cleaning unit that includes a fan preceded by various kinds of filtration. There are several kinds of air cleaning units used in machining centers. But the associated troubles have hindered from efficiently using these devices. The main problem is the relatively short period of filter replacement. The reason is that the air cleaning units usually do not have the de-oiling systems, thus leading the earlier clogging of filters and reducing the flow rate of hood. Thus, the first stage of study was conducted to overcome this problem by developing the new oil mist collector equipped with the easy de-oiling system. The principle of de-oiling is that the centrifugal force generated by spinning the drum covered by filter fabric separates oils from the filter fabric. It would be very similar to the spin-dry laundry. By adopting this de-oiling technique, the problems associated with the conventional oil mist collectors could be solved. Several tests/analyses were performed to make the lab-scale oil mist collector. The collection efficiencies and the de-oiling efficiencies of commercially available filter fabrics were tested. Subsequently, the endurance test were conducted by observing SEM photos of filter fabrics and measuring tensile strength/expansion coefficient after spinning the filter drum for 20 minutes at the different rotation speeds. By doing these experiments, the most appropriate filter fabric and rotation speed/duration were selected. Finally, the new oil mist collector was designed. In the near future, this device must be tested in the real machining center.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.4
• /
• pp.223-230
• /
• 2019

Purpose : Wellness tourism is defined as travel for the purpose of promoting health and well-being through physical, psychological, or spiritual activities. The development and verification of a comprehensive wellness program for health care for workers is needed. The purpose of this study is to investigate the wellness and skin health effects of skin health programs in order to develop high-value health care services. Methods : The subjects were 15 middle-aged women who understood the research and volunteered and participated in the two-day skin health wellness program. Participants were measured to determine their wellness index and skin health twice: before and after participating in the program. Wellness index measures include comprehensive wellness, physical wellness, mental wellness, emotional wellness, social/cultural wellness, financial wellness, and environmental wellness. Skin health measurement items consisted of skin oil, skin water, skin pore, skin elasticity, skin wrinkle, and skin pigment. The skin wellness program included aerobic exercise, endurance exercise, functional food, cosmetics, herbal tea, massages, spa treatments, meditation, and marine leisure sports. The t-test analysis was used to compare the difference between wellness index and skin health measurement items before and after the program. Results : Among the wellness index items, the comprehensive wellness index (p<.05), mental wellness index (p<.05) and environmental wellness index (p<.05) showed statistically significant differences. Among skin health items, skin oil (p<.05), skin elasticity (p<.01) and skin wrinkle (p<.01) all showed statistically significant differences. There was no statistically significant difference in physical wellness, emotional wellness, social/cultural wellness, financial wellness, skin water, skin pore and skin pigment. Conclusion : This study confirmed that the two-day complex wellness program is an effective program for some items of wellness index and skin health.

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.71-78
• /
• 2005

This study focuses on finding out engineering characteristics of asphalt concrete mixtures using mineral fillers with recycled waste lime, which is a by-product in the Soda Ash(Na2CO3) production course. The materials tested in this study were made with 25%, 50%, 75% and 100% of mixing ratio based on the conventional mineral filler ratio to analyze the recycle possibility of the waste lime. The asphalt concrete mixtures with recycled waste lime and hydrated lime, and conventional asphalt concrete mixtures were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete mixtures at the wide range of temperatures. It is also found that the mixtures with recycled waste lime show higher resistance against stripping than conventional asphalt concrete mixtures. It is concluded from various test results that the waste lime can be used as mineral fillers and especially can greatly improve resistance to permanent deformation of asphalt concrete mixtures at high temperatures.

• Ceramist
• /
• v.21 no.2
• /
• pp.4-18
• /
• 2018

Lastly, neuromorphic computing chip has been extensively studied as the technology that directly mimics efficient calculation algorithm of human brain, enabling a next-generation intelligent hardware system with high speed and low power consumption. Three-terminal based synaptic transistor has relatively low integration density compared to the two-terminal type memristor, while its power consumption can be realized as being so low and its spike plasticity from synapse can be reliably implemented. Also, the strong electrical interaction between two or more synaptic spikes offers the advantage of more precise control of synaptic weights. In this review paper, the results of synaptic transistor mimicking synaptic behavior of the brain are classified according to the channel material, in order of silicon, organic semiconductor, oxide semiconductor, 1D CNT(carbon nanotube) and 2D van der Waals atomic layer present. At the same time, key technologies related to dielectrics and electrolytes introduced to express hysteresis and plasticity are discussed. In addition, we compared the essential electrical characteristics (EPSC, IPSC, PPF, STM, LTM, and STDP) required to implement synaptic transistors in common and the power consumption required for unit synapse operation. Generally, synaptic devices should be integrated with other peripheral circuits such as neurons. Demonstration of this neuromorphic system level needs the linearity of synapse resistance change, the symmetry between potentiation and depression, and multi-level resistance states. Finally, in order to be used as a practical neuromorphic applications, the long-term stability and reliability of the synapse device have to be essentially secured through the retention and the endurance cycling test related to the long-term memory characteristics.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.1 s.20
• /
• pp.51-54
• /
• 2004

In recently days, the breed fish farm is increased in the beach side for farming fish. In such a farm, the heater is requested for preventing freezing in cold season. The heating material are requested high corrosion resistance and strength for endurance high corrosive salt and pressure. In case of low corrosion resistance and/or strength, the heating element shall be broke down and eventually make spillage or leaking contaminated salt. In the most cases, crevice corrosion is localized form of corrosion usually associated with a stagnant solution on the micro-environmental level. In this study, the crevice corrosion of Ferritic type 430 stainless steel is investigated. The size of specimen is $15{\times}20{\times}3mmt$. Test solution is 1N H2SO4 + 0.05N NaCl. The artificial crevice gap size is $0.24{\times}3{\times}15mmL$. Crevice corrosion is measured under applied voltage 300mV(SCE) to the external surface. the result of this study showed that 1) the induced time for initiation of crevice is 750seconds, 2) potential is dropped in the crevice from the top of gap opening from -320 to -399mV. The result confirmed that the potential drop(IR mechanism) in the crevice is one of mechanism for crevice corrosion.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.4
• /
• pp.631-642
• /
• 2015

The purpose of the study was to examine health status and mini nutritional assessment (MNA) according to self-esteem status of elderly in care hospital. The survey was carried out from $13^{th}$ to $31^{st}$ of September, 2014 in five care hospitals. Analysis was performed for 226 subjects. Evaluation criteria included demographics, clinical status, MNA, health-related quality of life (EQ-5D) and self-esteem. The SE I, SE II and SE III groups were divided by self-esteem scores. Data were analyzed one-way ANOVA, Duncan' multiple range test and Pearson's correlation using SPSS 15.0. Education level, religion, dental condition and medical endurance type were significantly different in all groups. Many elderly people were normal BMI ($20.94{\sim}21.67kg/m^2$). Self-esteem significantly increased in order of SE I, SE II and SE III. Mobility, usual activity and anxiety or depression were significantly different in all groups, and EQ-5D of SE II and SE III groups were significantly higher than that of SE I group. Comparison of MNA screening score in elderly patients was as follows : Score for food intake, psychological stress or acute disease, neuropsychological problems, pressure scores or skin ulcer, protein intake, mode of feeding, nutritional status and health status in SE I group were significantly lower than those of SE II and SE III groups. Mobility and drug intake of SE I group were significantly lower than those of SE III groups. Fruit and vegetable intake SE I group were significantly higher than those of SE II and SE III groups. MIS (Malnutrition Indicator Score) was significantly different among the SE I, SE II and SE III groups. We conclude that self-esteem score is positively correlated with protein intake, nutrition status, health status and MIS in elderly care hospital. To improve nutritional status of elderly in care hospitals, systematic nutrition management and self-esteem education program should be implemented.

• YAKHAK HOEJI
• /
• v.51 no.3
• /
• pp.219-227
• /
• 2007

Ginsenoside Rgl (Rgl), the pharmacologically active constituent of ginseng (Panax ginseng C.A. Meyer), has a variety of biological activities. The present study was undertaken to evaluate a possibility of Rgl whether it can be used in treatment or prevention of stress disorders. Animals were stressed by immobilization for 2 hours or electroshocks for 20 minutes. The normal group was not exposed to any stress. Rgl was subcutaneously injected as dosages of 5 and 10 mg/kg and red ginseng (RG) was orally administered 200 mg/kg as the positive control. Animals were given supplements for 5 days without stress, and then were given supplements for 5 days with stress. We recorded stress-related behavioral changes of experimental animals using the Etho-vision system. Weight of adrenal gland and levels of corticosterone in plasma were measured and stress related behaviors (smelling, grooming, face washing, rearing) were observed. Rgl didn't make significant behavioral changes in total open field and elevated plus maze test. Rgl did not influence on behavioral changes induced by electroshock stress. Whereas, 10 mg/kg of Rgl alleviated the increment of the freezing and face washing time and the decrement of the smelling and rearing time induced by restraint stress. The administration of Rgl 10 mg/kg has significantly increased the endurance time on rotating rod and swimming pool tests compared to the control group. These results indicate that Rgl can alleviate the damage induced by physical stress. This result suggests that Rgl may bea new candidate for treating stress related disorder.

• Journal of the Korean Society for Railway
• /
• v.14 no.2
• /
• pp.100-108
• /
• 2011

This paper investigates the structural stability and reliability on improving performance of flexible brake pad used in high speed train. To this end, an improved model of flexible pad was obtained through structural analysis. Brake pad specimens were subjected to modal, stroke and endurance tests to examine the dynamic characteristics and mechanical stability. The hot spot generation with increasing rotational speed was observed on chassis dynamometer equipment and then the structurally uniform contact between the disc and pad was achieved. The temperature distribution of flexible pad was measured using the infrared camcorder. Hence, the proposed flexible pad showed the better structural stability and thermal energy emission.