• 한국안전학회지
• /
• 제24권4호
• /
• pp.104-110
• /
• 2009

In this driving simulation study, the impairing effects of various types of electronic devices usage(i. e., destination search by using in-vehicle navigation system, TV watching and dialing cellular phone) during driving on front-to-rear-end collision avoidance were investigated. Percentage of collisions, driving speeds when the drivers collided, and initial reaction time for collision avoidance were analyzed and compared as the dependent measures. The results indicated that (1) any types of electronic devices usage during driving induced more serious collision-related impairment than control condition where no additional task was required, and (2) in general, destination search task appeared to impair drivers collision avoidance performance more than the other task requirements in terms of percentage of collisions and initial reaction time for collision avoidance, but TV watching induced most serious collision impact. These results suggested that any types of electronic device usage could distract drivers attention from the primary task of driving, and be resulted in serious outcome in potentially risky situation of front-to-rear-end collision. In particular, mandatory use of eye-hand coordination and receiving feedback seemed to one of essential factor leading the drivers visual attentional distraction.

• 한국조경학회지
• /
• 제40권6호
• /
• pp.60-69
• /
• 2012

전주시 건지산 UD 숲길은 2008년 한국토지공사 초록사회 만들기 공모사업의 일환으로 전북생명의 숲이 주관하여 설계 및 시공이 추진되었다. 이 연구는 이용자 만족도, 이용자 수 조사의 이용후 평가를 통해 UD 숲길 설계의 적정성을 평가하는데 목적이 있다. 연구결과, 건지산 UD 숲길의 주이용자는 60대 이상의 지역주민이 전체이용자의 37%를 차지하며, 이용목적은 산책과 휴식 51.5%, 운동 및 재활치료 40.6%로 나타났다. UD 숲길 만족도는 5점 리커트 척도에서 3.91로 나타났고, 전체 만족도에 영향을 미치는 주요 요소는 관리, 이용충돌, 폭과 경사에 대한 만족도 순서로 나타났다. 이용자수 조사에서 교통약자는 UD 숲길 45명, 기존 숲길 6명으로 나타났다. 연구결과를 통해 건지산 UD 숲길은 교통약자의 이용을 유도하고, 일반인과 교류할 수 있는 기회를 제공하는 것으로 나타났다. 또한 UD 숲길 주변의 높은 경관만족도는 기존지형과 수목을 가능한 보존하고, 목재 데크를 설치함으로써 기존 자연경관이 잘 유지된 점을 나타냈다. 건지산 UD 숲길의 이용후 평가는 도시숲길 조성시 장애인, 노인, 약자, 임산부, 어린이 등 다양한 신체조건의 이용자들이 안전하고 편리하게 이용할 수 있도록 유니버설 디자인 개념의 도입 필요성을 나타내주고 있다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.109-119
• /
• 2018

The purpose of this study is to evaluate the structural safety of the front-end loader for the 90 kW class of agricultural tractors in impact test conditions. Deformation and stress on the loader under the impact test conditions are analyzed using the commercial finite element analysis software ANSYS. In previous research dealing with the initial design of the loader, the maximum stress occurred in the mount and exceeded the yield strength of the material. In this paper, an improved design of the mount of the loader was proposed to reduce the stress concentration in the initial design. The safety of the improved design was verified by performing rigid-body dynamics analysis, transient structural analysis, and static structural analysis under three impact test conditions: a drop and catch test, a corner pull test, a corner push test. It was found that the local stress concentration in the mount that appeared in the initial design was greatly reduced in the improved design, and that the maximum stresses occurred in the three impact test conditions are smaller than the yield strength. It is expected that the design improvement of the mount proposed in this study and the method of analysis may be effectively used to enhance structural safety in the development of new model front loaders in the future.

• 한국정밀공학회지
• /
• 제33권3호
• /
• pp.191-198
• /
• 2016

Traceability is essential in modern automotive manufacturing. Among existing technologies, RFID is the most promising choice for this purpose. However, due to the harsh conditions of production lines, especially in the paint shop, automobile OEMs would require expensive dedicated RFID tags and readers, which are incompatible with standard RFID technologies. Unlike the manufacturing industry, the logistics industry uses UHF label tags for track and trace, which provides high performance and a low price. Recently, this technology has improved to the extent that it can be used in harsh conditions such as on metal parts or in liquid. Herein, we assess the technical, operational, and economic feasibility of UHF label-tag technology for seamless end-toend traceability. Based on prototyping, lab/field tests, and cost-benefit analysis, we have proven that the single disposable UHF tags can successfully replace the problematic and expensive tags used in most domestic automobile OEMs today.

• 한국식생활문화학회지
• /
• 제27권4호
• /
• pp.383-390
• /
• 2012

This study was conducted to investigate the physicochemical and sensory changes of 6 kinds of commercial Makgeolli (A, B, C, D, E, and F) during storage at $4{\pm}1^{\circ}C$ for 30 days. The initial pH was 3.50~4.23, but it increased to 3.65~4.37 by the end of the storage period (p<0.05) There were no significant differences in titratable acidity between the beginning and end of the storage period. The reducing sugar content of A and B increased, whereas C, D, E, and F decreased with increasing storage time. A decrease in lightness (L values) was observed in all samples with increasing storage time (p<0.05). The alcohol content increased from beginning values of 5.90~6.10% to ending values of 6.30~7.35% at the end of storage, of which sample B exhibited the highest value. A sensory evaluation test revealed that the overall acceptability of samples A, B, D, and E were still within acceptable limits, but samples C and F showed undesirable changes during 30 days of storage at $4^{\circ}C$.

• 한국소음진동공학회논문집
• /
• 제25권9호
• /
• pp.620-627
• /
• 2015

Long continuous bridge deck can become contracted considerably as temperature drops, which can lead to a large expansion of sleeper span at the end of it. Since this huge sleeper span then can cause problems both with safety of train operation and structural stability of tracks, it is necessary to take the issue into consideration systematically in the designing process of the bridge. In this paper, an evaluation process through the analysis of train-track interaction was presented which can basically review the effects of the expansion of sleeper span at the end of long continuous bridge deck on the safety of the train and the structural stability of the track. The analyses of the interaction between the light rail train and tracks were carried out targeting the sleeper span as a main parameter. The safety of train operation and structural stability of tracks in a light rail system due to the expansion of the sleeper span were evaluated by comparing the numerical results with the related criteria.

• 한국컴퓨터정보학회논문지
• /
• 제16권3호
• /
• pp.229-236
• /
• 2011

본 논문에서는 스마트폰용 경량화된 영한, 한영 모바일 번역기를 설계 및 구현한다. 번역 엔진은 자연스러운 번역과 높은 번역 품질을 위해 번역 메모리와 규칙기반의 번역 엔진으로 이중화를 한다. 개발된 번역 엔진의 사용자의 사용성 (Usability)을 극대화하기 위해 스마트폰에 내장된 카메라를 통한 문자인식(OCR; Optical Character Recognition) 엔진과 음성 합성 엔진(TTS; Text-to-Speech)을 각각 Front-End와 Back-end에 접목하였다. 실험결과 번역 품질은 BLEU와 NIST 평가치를 기준으로 구글번역기 대비 영한 번역은 72.4%, 한영 번역은 77.7%로 평가되었다. 이러한 평가결과는 본 논문에서 개발한 모바일 자동번역기가 서버 기반의 번역기의 성능에 근접하며 상업적으로 유용함을 보여준다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제14권2호
• /
• pp.215-236
• /
• 2005

The purpose of this paper is to examine the differences in the critical success factors for ERP adoption suggested by the system managers and the ERP consultants. The survey results indicated the following findings. First, there was no significant difference in the relative importance of the critical success factors between the system managers and the ERP consultants. Both groups agree that 'top manager's concern and support' is the most critical factor and that 'user involvement' is the second. However, the system managers tend to think 'training and education of end users' and 'cooperations among the project participants' more important than the consultants do. Second, both groups agree that the most important ERP contribution should be 'improvements in the business processes.' They also agree that the least important aspect is 'ERP's contribution to the individual's productivity.' In overall, the ordered lists of ERP evaluation criteria according to their importances were of no significant difference between the groups. Third the two groups showed differences when they were asked to evaluate the importance of the critical success factors for each of the ERP evaluation criterion. In general, the system managers tend to put more emphasis on 'training and education of end users' and 'adaptation of end users to the changed processes,' whereas the consultants tend to emphasize more on 'top managers' interest and supports' and 'project manager's capabilities and performance.' The differences in the critical success factors presented by the two groups indicated that more efforts need to be devoted to understanding other participant's interests and concerns in an ERP project team. Better coordinations based on the mutual understandings could improve the chance of achieving a success in adopting ERP packages.

• 한국컴퓨터정보학회논문지
• /
• 제8권4호
• /
• pp.47-56
• /
• 2003

이동 단말기와 이동 통신망이 급격하게 발전함에 따라 멀티미디어 자료를 재생하는 환경에서 종단간 서비스 품질이 다른 경우들이 발생하고 있다. 따라서 주어진 트랜스코더와 통신망을 고려하여 근원지 데이터를 목적지에서 요구하는 재생 서비스 품질에 맞게 변환하여 재생하기 위한 트랜스코딩 경로를 생성하는 알고리즘이 연구되었다. 그러나 이 방법은 멀티미디어 스트림이 트랜스코더에서 처리될 때 필요한 매개 변수인 워크로드와 처리량 중에서 워크로드만을 고려하였다. 그러므로 이 방법에 의하여 생성된 트랜스코딩 경로는 목적지에서 요구하는 서비스 품질에 맞게 재생 가능한지 검사하기 위하여 추가적인 계산을 필요로 한다. 이를 해결하기 위하여 본 논문은 멀티미디어 스트림이 목적지에 도착할 때 필요한 등시성 성질을 평가 함수에 이용한 T 알고리즘을 제안하였다. 즉, 여러 트랜스코딩 경로들 중에서 등시성 성질을 근거로 한 경험적 탐색으로 추적 재생 가능한 경로를 선택하는 방법이다. 제안된 알고리즘을 사용하면 종단간 상이한 서비스 품질로 실시간 전송되는 멀티미디어 데이터를 재생할 수 있는 트랜스코딩 경로를 좀 더 빠르게 생성할 수 있다.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.979-984
• /
• 2015

본 논문에서는 국내 가동 중인 원자력발전소의 안전주입노즐을 대상으로 안전단의 길이와 동종금속용접부의 두께가 이종금속용접부의 응력분포에 미치는 영향을 평가하였다. 이를 위해 4가지의 서로 다른 안전단 길이와 4가지의 서로 다른 동종금속용접부 두께를 고려한 상세 2차원 유한요소 열해석 및 응력해석을 수행하였다. 유한요소해석 결과 동종금속용접부의 두께는 안전단의 길이가 짧은 경우 축방향 응력에 어느 정도 영향을 미쳤으나 원주방향 응력에는 거의 영향을 미치지 않았다. 안전단의 길이는 길이가 증가함에 따라 내면에서의 축방향 및 원주방향 응력값이 증가하는 것으로 나타났으나 특정 안전단 길이를 기준으로 응력분포가 구분되는 경향을 나타냈다.