• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.501-508
• /
• 2019

In this paper, a study on a wireless check-up method of test equipment for captive flight test(CFT) was conducted. For CFT, test equipment is mounted on a POD, and check-up is carried on the test equipment's. For check-up the POD wirelessly, battery, power distribution unit, wireless communication devices were designed within the POD, and a check-up device is designed outside of the POD. Once the external check-up device sends a 'start signal' to the POD, it performs the overall check-up procedures and transmits the 'end signal' to the external check-up device. Detailed check-up results are stored in an internal storage device, and are possible to read from external check-up device if necessary, thereby improving the reliability of the wireless check-up. By implementing and applying these wireless check-up system, the reliability of the check-up was enhanced by dynamical and movable check-up, and safety is guaranteed as the check-up was carried without access to the aircraft.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.2
• /
• pp.25-30
• /
• 2018

Sn-Pb solder has been used in automotive electronics for decades. However, recently, due to the environmental and health concerns, some international environmental organizations such as the end-of-life vehicle (ELV) enacted legislation banning of the Pb usage in automotive electronics. For this reason, many studies to develop and promote Pb-free soldering have been significantly reported. Meanwhile, because of flexibility and lightweight, flexible printed circuit boards (FPCBs) have been increasingly used in automotive electronics for lightweight to improve fuel efficiency and space utilization. Although the properties of lead-free solders for automotive electronics have been widely studied, there is a lack of research on the reliability performance of the lead-free solder joint on FPCB under user conditions. This study reported the properties of solder joints between Pb-free solders such as Sn3.0Ag0.5Cu, Sn0.7Cu and Sn0.5Cu0.01Al (Si), and various FPCBs finished with organic solderability preservative (OSP) and electroless nickel immersion gold (ENIG). To evaluate on joint properties and reliabilities with different solder compositions and surface-finishing materials, pull strength test, thermal shock test, and bending cycle test were performed and analyzed. After the bending cycle test of solder joint on OSP-finishing, the fractures were occurred in solder and the lifetime of Sn3.0Ag0.5Cu solder joint was the longest.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.4
• /
• pp.14-24
• /
• 2023

The purpose of this study is to develop a prototype curtain wall with improved seismic performance and to verify the seismic performance by conducting an inter-floor displacement test. To this end, a prototype of the curtain wall was manufactured and a displacement similar to the earthquake load was induced, and then the damaged state of the curtain wall was checked. As a result of the first test, the frame and glass of the curtain wall were not damaged, but the Weather Sealant was partially damaged. As a result of the second test, there was no problem of glass breakage in seismic class (special), seismic class (I), seismic class (II), and AAMA 501.6. Through this experiment, the seismic performance of the curtain wall prototype was verified.

• Journal of the Korean School Mathematics Society
• /
• v.26 no.2
• /
• pp.137-158
• /
• 2023

This study aimed to analyze the shifts in the mathematics domains of the College Scholastic Ability Test (CSAT) since its inception in 1993, with the intent of identifying improvements for the future. The goal is to provide insights for exploring the direction of assessment in Korean high school mathematics education. To this end, we focused on the test system, content area, and behavioral area within the CSAT mathematics domains. Key findings include: first, the test structure influences the assessment factors and item types, in addition to the examination time and number of items. Second, by analyzing the content area, we established a correlation between the national curriculum and assessment area, and confirmed the importance of setting the assessment area. Third, the examination of the behavioral area tended to the item-type fixation, demonstrating the necessity of the ongoing modifications in evaluation item types. Building upon these findings, we discuss the direction of an evaluation that considers the evolving demands and shifts within mathematics education.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.s01
• /
• pp.64-85
• /
• 1988

Peanut seeds are characterized by high oils and proteins with good quality, and are utilized as an edible oil source and a protein-rich food products. The end products, being peanut butter, salted seed, confections, roasting stock and other by-products are favored in world-wide because of their unique roasted peanut flavor. As with many other foods, interest in the composition and chemistry of peanut is largely a result of thier use as human food. Thus, a more complete knowledge of thier chemical and food quality and flavor properties is desired. Literatures are reviewed mainly focucing on the physicochemical properties and nutritional quality of oil, protein and flavor in peanuts. Chemical properties of protein and oil, and volatile flavor component in peanut seeds are studied extensively in view point of chemical and food nutritional value. But in crop base, the synthesis and genetic studies of the chemicals could not provide valuable informations on the breeding for quality improvement. Some essential amino acids are limiting in peanut seeds and the tocopherols are very important in oil stability and for dietary adequacy ratio in high linoleic acid peanut oil, but it is thought to be quite difficult to improve by breeding technique as their lack information of gene actions. However, the selections of high protein and oil, and some essential amino acids and linoleic acid rich genotypes could be helpful for the quality improving. Research studies are also needed to elucidate the relationships between flavor components and consumer perception of peanut flavor.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.79-85
• /
• 2010

This study was investigated to review the potentials of irritation and skin sensitization of active ingredients and end-use products of pesticides for pesticide registration, prediction of irritation and sensitization, and data requirements for other purposes. Pesticide irritation and sensitization referred to the Pesticide Manual(14th edition), while toxicity was evaluated based on the data submitted by the pesticide registrant. Totally 148 active ingredients and 149 end-use products were analyzed to compare the positive response, formulation type, and correlation between active ingredients and products. Among active ingredients, ratio of positive response to skin irritation, eye irritation, and skin sensitization were 18.8, 47.0 and 20.6% respectively. While, positive response to skin irritation, eye irritation, and skin sensitization of the products were 14.9, 38.9 and 23.6%, respectively. Emulsifiable concentrate showed the highest positive response among formulation types showing skin irritation 31.3%, eye irritation 81.3%, and skin sensitization 31.3%. On the other hand granule type showed the lowest response with skin 4.8, eye 14.3 and sensitization 14.8%. There was no correlation by active ingredient content on irritation and sensitization of products. However, both active ingredients and products showed same positive response were skin 73.1%, skin sensitization 66.2%, and eye irritation 44.7%. By the these results, correlation between technical grade of active ingredients and end-use products would be use for pesticide management at the screening stage, especially skin irritation and skin sensitization.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.61-71
• /
• 1971

This study was conducted in order to investigate the effects of slaked lime and borax on the Akiochi paddy field. The pot trial(slaked lime was treated 0, 6, 10, 15g and borax 0, 0.75, 1.5g per pot) and the field trial(slaked lime was treated 0, 100, 200kg and borax 0, 10, 30, 50kg per 10are) respectively. The results are summarized as fo11ows. I. Pot Trial: 1. In a heavy treated of borax, appeared chlorosis on whole leaves(bottom) in early growing stage, However, in about 25 days after transplanting, these chlorosis were disappeared gradually. And in proportion to close by maturity after the ear-heading, changed to dark brown color and rolled at the end of upper leaves, finally withered. At the same time the part of the end of grains was also colored to dark brown. 2. Slaked lime effected to increase the ti1lering, hence increased the number of ear, on the other hand, borax showed the tendency of repression the tillering, conversely. 3. Borax effected to hurried up to heading date of rice plant, to which borax had been the plot of B$_1$ to 3 days and B$_2$ to 5 days, hurried up than control respectively, regardless of the quantities of slaked lime application. 4. According to the application of borax, the length of culm were shortened, otherwise the length of panicle were longished, then no recognized the. independent effect of slaked lime. 5. The number of grains per panicle were seemed like increased by treatment of slaked lime, but the grain were decreased in the heavy treatment of slaked lime and borax. These phenomena were showed in ratio of maturity likely tendency as above. 6. In the 1, 000 grains weight of brown rice, in the case of slaked lime was almost no significant, otherwise by increase the application of borax, increased the weight of 1, 000 grains and the size of the grains was greater. 7. The weight of rough rice and straw were showed the same tendency as the number of grains and maturity ratio. particularly, showed the phenomenon of the reduction by the heavy application of borax. II. Field trial: 1. In a heavy treated of borax, appeared chlorosis in a early growing stage, according to close by maturiting date after the ear-heading changed to dark brown the end of upper leaves, finally dried. 2. Slaked lime application accelerated the growth and increased the number of ear, but borax showed the tendency of repression the tillering. 3. Borax effected to hurried up to heading date of rice plant, according to heavy treatment of borax quickened heading date for 4 to 5 days. 4. As a whole, culm length was repressed by borax treatment. 5. Borax application 10kg per 10are advanced progress the maturity, but in the case of above 30kg per 10are of borax showed the tendency obstruction the maturity. 6. The yield of rough rice and brown rice recognized the independent effect of slaked lime and borax, respectively. the yield was decreased by the abundant of borax.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.53-61
• /
• 2017

In this study, specimens were produced with a column member and a wooden gusset only by inserting an wooden gusset which is a substitute for steel plate into the center of a slit-processed column member. The moment resistance performance of the specimens was compared with that of control specimens that used a steel plate. The measured maximum moments of the specimens produced with GFRP-reinforced wooden laminated gussets and pins were lower by 24% on average compared to the steel plate-inserted specimens, but they showed good toughness. The fracture shape suggests that it was fractured along the annual rings between the pin and the end of the column member. The rigid specimen that integrated a laminated wood and a wooden laminated gusset with adhesive showed 2.8 times greater initial rigidity and 40% greater maximum moment on average compared to the control specimen. The rigid specimens mainly fractured on a glulam around glue line.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.97-106
• /
• 2018

This paper summarizes the technical difficulties pertaining the double-compression ramp scramjet inlet model testing in a shock tunnel and their corresponding solutions. Four technical difficulties are identified: 1) test facility unstart, 2) flow disturbance and model damage due to the impact of diaphragm debris, 3) lack of fuel jet development due to multiple injection, and 4) short test time. After overcoming the identified technical difficulties, the improved results were confirmed through the results of shadowgraph images and shock tube end wall pressure.

• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.328-336
• /
• 1999

To characterize the hydro-mechanical behavior of a rock joint, a rotary shear testing apparatus was devised in this study. Shear stress was driven by twisting the end of a sample in the rotary shear testing apparatus. The test results show that the rotary shear test underestimates the peak shear strength of a rock joint. The torque is known as a function of the radial distance from the axis of rotation, resulting in the radial variation of the shear stress. Fluid flow through rock joints is mainly dependent on the Joint roughness, contact area, initial aperture. To examine the dependency, the relationship between the hydraulic and the mechanical apertures for shear-flow was established by measuring the initial aperture. It shows that the mechanical aperture and the hydraulic aperture increase linearly with the dilatancy. The difference between the hydraulic and mechanical apertures describes the deviation from the behavior predicted by the parallel plate model.