• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.464-471
• /
• 2013

With the advance of wireless sensor networks, WMSN(Wireless Multimedia Sensor Networks) researches to transfers multimedia data have been studied actively. First of all, three basic protocols, End-to-end, Hop-by-hop, and Unreliable transmission method, are compared to transfer multimedia data using simulations. This paper presents an efficient protocol to transfer multimedia data by overhearing messages of nodes and by transmitting next packets during the unused time interval. The proposed method is verified its performance by simulations and experiments. The results shows that the transmission rate of the proposed method 22% higher than that of End-to-end protocol with half of transmission time. Also the performance of the proposed method is compared with that of PIGAB(Packet Interval Gap based on Adaptive Backoff).

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.149-152
• /
• 2000

In the Internet, multimedia data transfer is hard to guarantee the characteristics of the Real-Time because of the Best-Effort of the nature of IP, then additional mechanism is applied to multimedia application for real-time data. In this paper, we introduce the nature of multimedia and the necessary facility for real-time protocol. We propose protocol layer, which has necessary function above mentioned and offer the end-to-end transfer far real-time data. Also, the proposed protocol perform a next low operation: 1) a required information for QoS control by using Feedback mechanism is obtained from sender, 2) divided a transferred packet by delay and loss priority. 3) recognized the low service models, and 4) decided a bandwidth and QoS according to a network state

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.168-172
• /
• 2010

The Network-based handover still has problems such as the transmission delays and the packet losses in the case of macro mobility, though technological advances have been made in the wireless and mobile communication. For end-to-end handover, the link bandwidth has been reduced in the wireless network due to its burst errors and congestion control. To overcome such problems, we propose a new scheme of the macro handover according to the protocol layer. The proposed macro handover is implemented on the network layer to partially substitute wired signaling for wireless signaling, to flexibly employ buffers, and on the transport layer to postpone its retransmission time. We have performed extensive simulation using ns-2 and the result shows that our proposed scheme outperforms the other existing schemes in terms of transmission delay, packet loss, and data transfer rate during the handovers.

• Journal of Communications and Networks
• /
• v.12 no.3
• /
• pp.275-284
• /
• 2010

The current multihome-aware protocols (like stream control transmission protocol (SCTP) or parallel TCP for concurrent multipath data transfer (CMT) are not designed for high-capacity and large-latency networks; they often have performance problems transferring large data files over shared long-distance wide area networks. It has been shown that SCTP-CMT is more sensitive to receive buffer (rbuf) constraints, and this rbuf-blocking problem causes considerable throughput loss when multiple paths are used simultaneously. In this research paper, we demonstrate the weakness of SCTP-CMT rbuf constraints, and we then identify that rbuf-blocking problem in SCTP multihoming is mostly due to its loss-based nature for detecting network congestion. We present a simulation-based performance comparison of FAST TCP versus SCTP in high-speed networks for solving a number of throughput issues. This work proposes an end-to-end transport layer protocol (i.e., FAST TCP multihoming as a reliable, delaybased, multihome-aware, and selective ACK-based transport protocol), which can transfer data between a multihomed source and destination hosts through multiple paths simultaneously. Through extensive ns-2 simulations, we show that FAST TCP multihoming achieves the desired goals under a variety of network conditions. The experimental results and survey presented in this research also provide an insight on design decisions for the future high-speed multihomed transport layer protocols.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.111-118
• /
• 2012

When broadcasters want immediately a variety of VOD files in a distributed server of them data centers and away contents provider, CPs of different platform to exchange high-quality HD, 3DTV video and other video files over the IP networks of high-performance that can be transferred quickly and must be configured quickly. This paper, by using an optional encryption method to complement a QoS and security of public network, suggests high speed and secure content transmission protocol such as VPN(Virtual Private Network) for large video files and big data. As configured high performance VPN, end to end devices use the best of available resources over public network by parallel transfer protocol and the secure content delivery network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.367-374
• /
• 2007

In this paper, we investigate the features of scientific remote collaborative applications. The presented features are the high speed disk access, the high speed transportation protocol, and the dedicated light path, which are for the high performance of remote end-to-end collaboration. In the environment that satisfies the features, we achieve 4.7Gbps peak throughput between Korea and U.S.A.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5928-5947
• /
• 2019

Multicast Mesh based Mobile Ad-hoc NETworks (MANETs) provide efficient data transmission in energy restraint areas without a fixed infrastructure. In this paper, the authors present an improved version of protocol SLIMMER developed by them earlier, and name it SLIMMER-SN. Most mesh-based protocols suffer from redundancy; however, the proposed protocol controls redundancy through the concept of forwarding nodes. The proposed protocol uses remaining energy of a node to decide its energy efficiency. For measuring stability, a new metric called Stability of Node (SN) has been introduced which depends on transmission range, node density and node velocity. For data transfer, a weighted cost function selects the most energy efficient nodes / most stable nodes or a weighted combination of both. This makes the node selection criteria more dynamic. The protocol works in two steps: (1) calculating SN and (2) using SN value in the weighted cost function for selection of nodes. The study compared the proposed protocol, with other mesh-based protocols PUMA and SLIMMER, based on packet delivery ratio (PDR), throughput, end-to-end delay and average energy consumption under different simulation conditions. Results clearly demonstrate that SLIMMER-SN outperformed both PUMA and SLIMMER.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.63-73
• /
• 2015

In the end to end data transfer protocols, it is very important to correctly estimate available bandwidth. In UDT (UDP based Data Transfer), receiver estimates the MTR (Maximum Transfer Rate) of the current link using pair packets transmitted periodically from sender and, then sender finally decides the MTR through EWMA (Exponential Weighted Moving Average) algorithm. Here, MTR has to be exactly estimated because available bandwidth is calculated with difference of MTR and current transfer rate. However, when network is congested due to traffic load and where competing flows are coexisted, it bring about a severe fairness problem. This paper proposes a congestion degree based MTR estimation algorithm. Here, the congestion degree stands a relative index for current congestion status on bottleneck link, which is calculated with arriving intervals of a pair packets. The algorithm try to more classify depending on the congestion degree to estimate more actual available bandwidth. With the network simulation results, our proposed method showed that the fairness problem among the competing flows is significantly resolved in comparison with that of UDT.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.281-284
• /
• 2004

This paper presents the design and implementation of a QoS based enhanced collaboration system in MDO. This is an efficient distributed communication tool between designers. It supports text communication, audio/video communication, file transfer and XML data sending/receiving. Specially, this system supports a dynamic QoS self-adaptation by using the improved direct adjustment algorithm (DAA+). The original direct adjustment algorithm adjusts the transmission rate according to the congestion level of the network, based on the end to end real time transport protocol (RTP), and controls the transmission rate by using the information of loss ratio in real time transport control protocol (RTCP). But the direct adjustment algorithm does not consider when the RTCP packets are lost. We suggest an improved direct adjustment algorithm to solve this problem. We apply our improved direct adjustment algorithm to our of QoS (Quality of Service) [1] based collaboration system and show the improved performance of transmission rate and loss ratio.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.143-151
• /
• 2008

In this paper, we have implemented a ubiquitous healthcare system that can measure and check human's health in anytime and anywhere. The implemented prototype are composed of both front-end and back-end. The front-end have several groups: environment sensor group such as temperature, humidity, photo, voice sensor, health sensor group such as blood pressure, heart beat, electrocardiogram, spo2 sensor, gateway for wired/wireless communication, and RFID reader to identify personal. The back-end has a serial forwarder to propagate measurment results, monitor program, and medical information server The implemented sensor node constructs a sensor network using the Zigbee protocol and is ported the tinyOS. The data gathering base node is linux-based terminal that can transfer a sensed medial data through wireless LAN. And, the medical information server stores the processed medical data and can promptly notify the urgent status to the connected medical team. Through our experiments, we've confirmed the possibility of ubiquitous healthcare system based on sensor network using the Zigbee.