• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1604-1618
• /
• 1995

In the process of mechanical assembly design, assembly modeling systems have been used mainly for the design verification before manufacturing by enabling to check the interference and/ or the dynamic and kinematic performance. However, the conventional assembly modeling systems have a shortcoming that they can not be used in the initial design stage but can be used only after the design is fully completed. In other words conventional assembly modeling systems provide bottom-up modeling which means that the detailed modeling of components must precede the definition of relationships between them. To resolve this problem, an assembly modeling system is proposed to provide a top-down modeling environment in which components and assembly can be modeled simultaneously. To this end, an assembly data structure suitable for top-down assembly modeling has been established. Feature positioning Module(FPM) using geometric constraints has been also developed. The Sekective Solving Method proposed for FPM is based on the priority between the constraint equations and enables the designer's intent expressed by geometric constraints to be maintained throughout the whole modeling process. Finally, the feature based modeling technique using two-level features has been developed. Two-level features include an abstract model and a detailed model in a merged form in non-manifold data frame.

• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.611-621
• /
• 2018

Compared with the highway bridges, the relatively higher requirement on the safety and comfort of vehicle makes the high-speed railway (HSR) bridges need to present enhanced dynamic performance. To this end, installing a health monitor system (HMS) on selected key HSR bridges has been widely applied. Typically, the HSR takes fully enclosed operation model and its skylight time is very short, which means that it is not easy to operate the acquisition devices and download data on site. However, current HMS usually involves manual operations, which makes it inconvenient to be used for the HSR. Hence, a HMS named DASP-MTS (Data Acquisition and Signal Processing - Monitoring Test System) that integrates the internet, cloud computing (CC) and virtual instrument (VI) techniques, is developed in this study. DASP-MTS can realize data acquisition and transmission automatically. Furthermore, the acquired data can be timely shared with experts from various locations to deal with the unexpected events. The system works in a Browser/Server frame so that users at any places can obtain real-time data and assess the health situation without installing any software. The developed integrated HMS has been applied to the Xijiang high-speed railway arch bridge. Preliminary analysis results are presented to demonstrate the efficacy of the DASP-MTS as applied to the HSR bridges. This study will provide a reference to design the HMS for other similar bridges.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2004년도 정기총회 및 학술대회
• /
• pp.107-111
• /
• 2004

본 논문에서는 PC 기반 지상파 DMB(Terrestrial Digital Multimedia Broadcasting, T-DMB) 수신기를 위한 오류에 견고한 SW 구현에 대해 설명한다. 이 수신기는 PC 외부에 T-DMB 신호를 안테나로 수신하여 복조하고 채널 복호하는 프론트 엔드(front-end) 수신 모듈을 이용, USB를 통하여 RS(Reed-Solomon) 부호화된 MPEG-2 TS(Transport Stream) 데이터를 읽어 들여 RS 복호, TS 역다중화, 비디오 보호, 오디오 복호 등의 SW 처리 과정을 거쳐 디스플레이 상에 수신 내용을 표시하게 된다. 수신기가 실용적으로 동작하기 위해서는, 수신된 비트스트림이 예상하지 못한 형태일 때도 오동작하거나 멈춰 서지 않아야 한다. 수신된 비트스트림에는 채널 비트 오류로 인해 훼손된 부분이 있을 수 있으며, 송출 시에 잘못 제작된 비트스트림도 있을 수 있다. 본 논문에서는 우선 RS 복호를 수행하여 정정 가능한 범위까지 오류를 정정하고, 검출되었으나 정정하지 못한 오류 또는 비트스트림 제작 시의 오류로 인한 비트스트림 구문 오류를 검출하여 오류 처리를 수행하며, 이로 인한 화질 손상을 숨기기 위해 프리즈 프레임(freeze-frame)을 수행하도록 하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권1호
• /
• pp.38-42
• /
• 2002

A chitinase gene (pCHi58) encoding a 58 kDa chitinase was isolated from the Serratia marcescens KCTC 2172 cosmid library. The chitinase gene consisted of a 1686 bp open reading frame that encoded 562 amino acids. Escherichia coil harboring the pChi58 gene secreted a 58 kDa chitinase into the culture supernatant. The 58 kDa chitinase was purified using a chitin affinity column and mono-S column. A nucleotide and N-terminal amino acid sequence analysis showed that the 58 kDa chitinase had a leader peptide consisting of 23 amino acids which was cleaved prior to the 24th alanine. The 58 KDa chitinase exhibited a $98\%$ similarity to that of S. marcescens OMB 1466 in its nuclotide sequence. The chitinolytic patterns of the 58 kDa chitinase released N,N'-diacetyl chitobiose (NAG2) as the major hydrolysis end-product with a trace amount of N-acetylglucosamine. When a 4-methylumbellyferyl-N-acetylglucosamin monomer, dimmer, and tetramer were used as substrates, the 58 kDa chitinase did not digest the 4-Mu-NAG monomer $(analogue\;of\;NAG_2)$, thereby indicating that the 58 kDa chitinase was likely an endochitinase. The optimum reaction temperature and pH of the enzyme were $50^{\circ}C$ and 5.0, respectively.

• 한국통신학회논문지
• /
• 제27권12C호
• /
• pp.1282-1287
• /
• 2002

본 논문에서는 가정 내의 전화선을 이용한 홈 네트워크 기술인 10Mbps HomePNA(Home Phoneline Networking Alliance) 20 PHY 회로의 설계 및 그에 대한 검증방법을 보여 준다. HomePNA 2.0 PHY 회로는 MII(Media Independent Interface)와 AFE 인터페이스에 의해 외부와 연결된다. 설계된 10Mbps HomePNA 2.0 PHY의 회로의 전체 구조는 Management block IEEE 802.3 CSMA/CD MAC(Media Access Control) block, 변조 및 복조 block으로 크게 구성된다. 설계된 회로는 프로토타입 FPGA PCB 보드를 이용하여 검증하였다. 또한, Linux 기반의 드라이버 프로그램을 개발하여 HomePNA 프레임 데이터 전송의 기본적인 동작을 확인하였으며, HomePNA 2.0 링크 계층 프로토콜의 RNCF(Rate Negotiation Control Function)에 의하여 전송속도의 변화를 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1067-1071
• /
• 2006

Prior to destructive testing, diagnostic tests were performed in ten high voltage motors. Diagnostic tests included polarization infer, ac current, dissipation factor$(tan{\delta})$ and partial discharge magnitude. The rewind of motet slater insulation at rated voltage is assessed by the results of these tests. After completing the diagnostic tests, the stator windings of motors were subjected to gradually increasing ac voltage, until the insulation punctured. No. 8 motor failed near rated voltage of 19.0 kV. The breakdown voltage of No. 4 motet was 7.0 kV which is lower that expected for good quality coils in 6.6 kV class motors. The failure was located in a line-end coil at the exit from the core slot. These two motors began operation in 1994. While testing No. 7 motor, flashover occurred between the stator winding and the stator frame at 15 kV. The relationship between the diagnostic test and the drop in insulation breakdown voltage was analyzed.

• Structural Engineering and Mechanics
• /
• 제50권1호
• /
• pp.1-17
• /
• 2014

In this paper, overstrength, ductility and response modification factors are calculated for frames braced with a different type of buckling restrained braces, called reduced yielding segment BRB (Buckling Restrained Brace) in which the length of its yielding part is reduced and placed in one end of the brace element in comparison with conventional BRBs. Forthermore, these factors are calculated for ordinary BRBF and the results are compared. In this regard incremental dynamic analysis (IDA) method is used for studying 17 records of the most known earthquakes happened in the world. To do that, the considered buildings have different stories and two bracing configurations: diagonal and inverted V chevron, the most ordinary configurations of BRBFs. Static pushover analysis, nonlinear incremental dynamic analysis and linear dynamic analysis have been performed using OpenSees software. Considering the results, it can be seen that, overstrength, ductility and response modification factors of this type of BRBF(Buckling Restrained Braced Frame) is greater than those of conventional types and it shows better seismic performance and also eliminates some of conventional BRBF's disadvantages such as low post-yield stiffness.

• 한국임상약학회지
• /
• 제29권4호
• /
• pp.286-294
• /
• 2019

Background: At the end of the'Waste Drug Disposal Project', collection and disposal of waste drugs remain a social issue. Objective: This study aimed to provide suggestions to improve the drug waste management system in Korea by comparing domestic and overseas relevant programs. Methods: This is a comparative study between South Korea, Australia, Canada, France, and the US. These overseas countries were selected because they have been operating waste drug management programs continuously to date. Comparison was conducted by a pre-determined analysis frame including legal regulation, enforcement program and its performance. Results: All selected countries except Australia had legal regulations on drug wastes. The US had the largest variety of drug waste disposal methods. Canada had recommended that pharmacies actively participate in drug waste withdrawal programs. France had the largest variety of methods to promote relevant programs, including window sticker, SNS, and app, as well as the highest level of awareness and participation. Australia had the lowest level of awareness and participation in pharmaceutical waste management programs. Pharmaceutical companies took responsibility of paying for these programs in the selected overseas countries. Conclusion: Further efforts should be made to establish a clear guideline including the role of pharmaceutical companies, and to develop various methods for the public to be aware of appropriate ways of disposing drug wastes in Korea.

• 한국공간구조학회논문집
• /
• 제13권2호
• /
• pp.57-66
• /
• 2013

There are a number of construction methods to build spatial structures such as erection method, Element method, Block method, Sliding method, Lift-up method and Push-up method. These methods are uneconomical and low accuracy, and require long construction duration because of a need of a scaffold or a tower crane to build spatial roof frame. In this study, the construction method to erect a truss structure was proposed as an economical and easy installation method. The proposed method has end hinges of keel truss and winches with horizontal cable. This method makes safe and accurate production and reduces construction duration because trusses are built on the floor or supporter. The goal of this study is to verify the validity of construction method by building scale model using the proposed method.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.209-214
• /
• 2016

This paper analyzes the magnetic property according to the machined shape of steel material with non-oriented silicon steel (50PN470/50A470), that is most commonly used in the design of electrical equipment. Toward this end, specimens were produced and divided into Bar-Specimen (Epstein Frame Tester) and Ring-Specimen (Toroidal Ring Tester). The characteristics of the electrical Silicon steel were measured using the instruments solely dedicated to measuring each specimen. The core loss of the Bar-Specimen, which is commonly used, was found to be less than that of the Ring-Specimen. This is a very important design factor in achieving the objectives of improving the product efficiency and predicting the performance of electrical equipment. It serves as a critical point of view in order to reduce the error between design value and product value. A comparative analysis was conducted regarding various characteristics (Hysteresis, B-H characteristic, Iron loss, Minor loop, Coercive force, Residual magnetic flux density, etc.) of the electrical silicon steel considered in the design of the electrical equipment according to the specimen.