Semiconductor chip encapsulation process is employed to protect the chip and to achieve optimal performance of the chip. Expert decision-making to obtain the appropriate package design or process conditions with high yields and high productivity is quite difficult. In this paper, an expert system for semiconductor chip encapsulation has been constructed which combines a knowledge-based system with CAE software.
본 연구에서는 일액형 이방 도전성 페이스트(anisotropic conductive paste, ACP) 혼합 조성의 상온 보관성을 향상시키기 위해 2-methyl imidazole 경화 촉매제를 5종의 각기 다른 물질로써 encapsulation하였다. Encapsulation용 분말 물질들은 DSC를 통해 그 융점을 관찰하였으며, 이를 통해 encapsulation용 분말 물질들을 액상으로 용융시켜 encapsulation하는 공정이 가능함을 확인할 수 있었다. Encapsulation된 2-methyl imidazole 분말을 포함한 ACP 혼합물질의 상온 보관성을 평가하기 위하여 시간에 따른 점도 변화가 관찰되었다. 그 결과, stearic acid와 carnauba wax로 encapsulation된 2-methyl imidazole 분말을 포함한 혼합물질에서 향상된 상온 보관성을 관찰할 수 있었으며, 이러한 formulation은 기본 혼합물질과도 유사한 경화 거동을 보임을 확인할 수 있었다. 최종적으로 stearic acid와 carnauba wax로 encapsulation된 2-methyl imidazole 분말을 포함한 혼합물질을 사용하여 RFID 칩을 제조된 안테나 패턴이 형성된 PET 기판에 고속 플립칩 본딩을 실시하였다. 이 경우 측정된 접합 강도는 기본 혼합물질에 비해 약 37%의 수준인 것으로 측정되었다.
This study investigated the impact of inulin (INL) on viability of L. plantarum D-2 (LPD2) by encapsulation through spray drying (SD) and its commercialization potential to alternative of conventional wall material maltodextrin (MD). LPD2, derived from sea tangle (Saccharina japonica) kimchi, is probiotics exhibiting significant attributes like cholesterol reduction, antioxidant properties, and resilience to acidic and bile environments. To enhance storage viability and stability of LPD2, encapsulation was applied by SD technology. The optimum encapsulation condition with MD was 10% MD concentration (MD10) and inlet temperature (96℃). The optimum concentration ratio of MD and INL was 7:3 (INL3) for alternative of MD with similar encapsulation yield and viability of LPD2. Viability of LPD2 with INL3 exhibited almost 8% higher than that with MD10 after 50 days storage at 25℃. Physicochemical characteristics of the encapsulated LPD2 (ELPD2) with MD10 and INL3 had no significant different between flowability and morphology. But, ELPD2 with INL3 had lower water solubility and higher water absorption resulting in extension of viability of LPD2 compared to that with MD10. The comprehensive study results showed that there was no significant difference in the encapsulation yield and physicochemical properties between ELPD2 with MD10 and INL3, except of water solubility index (WSI) and water absorption index (WAI). INL have the potential to substitute of MD as a commercial wall material with prebiotic functionality to enhance the viability of LPD2 by encapsulation.
최근 플렉서블 OLED, 플렉서블 반도체, 플렉서블 태양전지와 같은 유연전자소자의 개발이 각광을 받고 있다. 유연소자에 밀봉 혹은 봉지(encapsulation) 기술이 매우 필요하며, 봉지 기술은 유연소자의 응력을 완화시키거나, 산소나 습기에 노출되는 것을 방지하기 위해 적용된다. 본 연구는 봉지막(encapsulation layer)이 반도체 칩의 내구성에 미치는 영향을 고찰하였다. 특히 다층 구조 패키지의 칩의 파괴성능에 미치는 영향을 칩의 center crack에 대한 파괴해석을 통하여 살펴보았다. 다층구조 패키지는 폭이 넓어 칩 위로만 봉지막이 덮고있는 "wide chip"과 칩의 폭이 좁아 봉지막이 칩과 기판을 모두 감싸고 있는 "narrow chip"의 모델로 구분하였다. Wide chip모델의 경우 작용하는 하중조건에 상관없이 봉지막의 두께가 두꺼울수록, 강성이 커질수록 칩의 파괴성능은 향상된다. 그러나 narrow chip모델에 인장이 작용할 때 봉지막의 두께가 두껍고 강성이 커질수록 파괴성능은 악화되는데 이는 외부하중이 바로 칩에 작용하지 않고 봉지막을 통하여 전달되기에 봉지막이 강하면 강한 외력이 칩내의 균열에 작용하기 때문이다. Narrow chip모델에 굽힘이 작용할 경우는 봉지막의 강성과 두께에 따라 균열에 미치는 영향이 달라지는데 봉지막의 두께가 작을 때는 봉지막이 없을 때보다 파괴성능이 나쁘지만 강성과 두께의 증가하면neutral axis가 점점 상승하여 균열이 있는 칩이 neutral axis에 가까워지게 되므로 균열에 작용하는 하중의 크기가 급격히 줄어들게 되어 파괴성능은 향상된다. 본 연구는 봉지막이 있는 다층 패키지 구조에 다양한 형태의 하중이 작용할 때 패키지의 파괴성능을 향상시키기 위한 봉지막의 설계가이드로 활용될 수 있다.
A simplified technique which cryoprotects zygotic embryos by encapsulation-dehydration was developed for the germplasm conservation of herbaceous peony (Paeonia lactiflora Pall.). The highest survival rate $(85\%)$ was obtained from embryos treated by encapsulation-dehydration. The zygotic embryos were precultured on MS medium containing 0.3mg/L $GA_3$ for 1 day. The precultured embryos were encapsulated in $3\%$ (w/v) alginate beads and immersed for 1 h in MS medium containing 2 M glycerol and 0.5 M sucrose. The encapsulated embryos were dehydrated for 5h by air drying prior to direct immersion in liquid nitrogen. This encapsulation-dehydration method appears to be a promising technique for germplasm cryopreservation of a herbaceous peony.
Individual solar cells must be connected together to give the appropriate current and voltage levels and they must also be protected from damage by the environment. [1] PV module consists of a glass/ polymer encapsulation/ solar cell string/ polymer encapsulation/ back sheet. Usually, encapsulation materials is used EVA(ethylene vinyl acetate), PVB(polyvinyl butyral), PO(polyolefin)sheet. This study is about fabrication of module using silicone material instead of above them. We got to know advantage that is fabrication time and efficiency of modules.
Initial burst is one of the major challenges in protein-encapsulated microparticle systems. Since protein release during the initial stage depends mostly on the diffusional escape of the protein, major approaches to prevent the initial burst have focused on efficient encapsulation of the protein within the microparticles. For this reason, control of encapsulation efficiency and the extent of initial burst are based on common formulation parameters. The present article provides a literature review of the formulation parameters that are known to influence the two properties in the emulsion-solvent evaporation/extraction method. Physical and chemical properties of encapsulating polymers, solvent systems, polymer-drug interactions, and properties of the continuous phase are some of the influential variables. Most parameters affect encapsulation efficiency and initial burst by modifying solidification rate of the dispersed phase. In order to prevent many unfavorable events such as pore formation, drug loss, and drug migration that occur while the dispersed phase is in the semi-solid state, it is important to understand and optimize these variables.
We fabricated an organic-inorganic nano laminated encapsulation layer using molecular layer deposition (MLD) combined with atomic layer deposition (ALD). The $Al_2O_3$ inorganic layers as an effective single encapsulation layer were deposited at 80 degree C using ALD with alternating surface-saturation reactions of TMA and $H_2O$. A self-assembled organic layers (SAOLs) were fabricated at the same temperature using MLD. MLD and ALD deposition process were performed in the same reaction chamber. The prepared SAOL-$Al_2O_3$ organic-inorganic nano laminate films exhibited good mechanical stability and excellent encapsulation property. The measurement of water vapor transmission rate (WVTR) was performed with Ca test. We controlled thickness-ratio of organic and inorganic layer, and specific ratio showed a lowest WVTR value. Also this encapsulation layer contained very few pin-holes or defects which were linked in whole area by defect test. To apply into real OLEDs panels, we controlled a film stress from tensile to compressive and flexibility defined as an elastic modulus with organic-inorganic ratio. It has shown that OLEDs panel encapsulated with nano laminate layer exhibits better properties than single layer encapsulated in acceleration conditions. These results indicate that the organic-inorganic nano laminate thin films have high potential for flexible display applications.
In the research, we have proposed a novel encapsulation with simple process and steady film for external environment in comparison with conventional encapsulation method. This was designed to cover the emitting organic material from air. Silicon 야oxide was used for thin film of encapsulation and the deposition thickness of the organic film was 220 nm. Operating voltage of green OLED with encapsulation was 5.5 V and luminance was 7.370 cd/$m^2$ at the applied voltage of 14.5 V. Luminance was measured in 10 hour intervals at the air-exposed condition. After 110 hours and 300 hours, luminances of green OLED were 7,368 and 7,367 cd/$m^2$, respectively. Luminance of green JLED doesn't decrease until 300 hours. As a results, proposed encapsulation can increase the life time of green OLED.
Previously, we have reported that PLGA nanoparticles were prepared for sustained release of water-soluble blue dextran and the particle size, in vitro release pattern and encapsulation were modulated by varying polymers. This study was designed to encapsulate plasmid DNA in PLGA nanoparticles and to investigate the effect of Polymers and temperatures. PLGA nanoparticles were fabricated with poloxamer 188 (P188) or poloxamer 407 (P407) by using spontaneous emulsification solvent diffusion method. As a model plasmid DNA, pCMV-Taq2B/1L-18 was encapsulated in PLGA nanoparticles. Then, the particle size, zeta potential and encapsulation efficiency of nanoparticles containing plasmid DNA were investigated. Particle sizes of PLGA nanoparticles prepared with P188 and P407 were in the range of 200-330 nm and 250-290 nm, respectively. Zeta potentials of nanoparticles were negative regardless of nanoparticle compositions. Encapsulation efficiency of P407 nanoparticles prepared at $30^{\circ}C$ was higher than those at other preparation condition. From the results, the PLGA nanoparticles prepared with poloxamers at different temperature, could modulate the particles size of nanoparticles, and encapsulation efficiency of plasmid DNA.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.