• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.306-310
• /
• 2009

Packed-bed reactor for removing ammonia was tested at different loading rates. Nitrifiers for ammonia removing was encapsulated in gel media which consisted of polyethlene glycol, alginate and activated carbon. The removal efficiency was nearly 100% when ammonia loading was $12g/m^3/hr$, and the maximum elimination capacity (EC) achieved on this study was $18g/m^3/hr$. The initial microbial portion of nitrifiers in the media was about 82% and it was increased to more than 90% at the end of the operation. Short-term shock loading test was carried out to survey the stability of the media. The inlet loading rates were varied from 2 to $20g/m^3/hr$. The packed-bed reactor overcame the shock loading i.e. removal efficiency recovered rapidly from about 80% to almost 100% within 6 hrs. The results of Live/Dead cell test showed that nitrifiers maintained there activity in the encapsulated media during the test and also against ammonia shock load.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.362-365
• /
• 2015

Silica encapsulated ZnSe quantum dots (QDs) were prepared by employing two microemulsion systems: AOT/water/cyclohexane microemulsions containing ZnSe quantum dots with NP5/water/cyclohexane microemulsions containing tetraethylorthosilicate (TEOS). Using this method, cubic zinc blende nanoparticles (3 nm in diameter) were synthesized and encapsulated by silica nanoparticles (20 nm in diameter). The temperature dependence of photoluminescence (PL) for silica-encapsulated ZnSe QDs was investigated to evaluate this material as a temperature sensor media. The fluorescence emission intensity of silica-encapsulated ZnSe nanoparticles (NPs) was decreased with an increase of ambient temperature over the range from $30^{\circ}C$ to $60^{\circ}C$ and a linear relationship between the temperature and the emission intensity was observed. In addition, the temperature dependence of PL intensity for silica-encapsulated ZnSe NPs showed a reversible pattern on ambient temperature. A reversible temperature dependence of the luminescence combined with its insensitivity toward quenching by oxygen due to silica coating established this material as an attractive media for temperature sensor applications.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.29-35
• /
• 2012

A bio-encapsuled media was developed to apply on reducing odors produced from organic waste treatment process. The microorganism, candida tropicalis, was encapsulated in sponge media consisted of polyurethane material. Sodium alginate as a natural polymer which does not affect to hydrophilic microbes and PEGDA(poly ethylene glycol diacrylate) as a artificial polymer were used for the encapsuled media. The media was evaluated with TMEDA (N,N,N',N'-tetramethylethylenediamine, 0.02~0.1%) as a catalyst at different temperature 25 and $35^{\circ}C$. The best performance was achieved with 0.02% of TMEDA at $25^{\circ}C$. The microbes' activity in the media was examined by Live/Dead cell method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.825-827
• /
• 2002

The polymer encapsulation of white inorganic $TiO_2$ pigment particles was prepared by a two stage dispersion polymerization technique for applications in electrophoretic displays (EPDs). In order to give functionality for inorganic pigment particles in the EPD, we have investigated the density of the polymer encapsulated $TiO_2$ particles. The average density of the polymer encapsulated $TiO_2$ particles was 2.2 at 25$^{\circ}C$. The average density of the polymer encapsulated $TiO_2$ particles is suitable to 1.7, due to density matching with suspending media. Therefore, we will attempt density compatibility of dispersion polymerization technique for encapsulation of $TiO_2$ particles in suspending media.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.328-331
• /
• 2011

ZnSe quantum dots (QDs) were prepared by employing water-containing Dioctyl sodium sulfosuccinate (AOT) reversed micelles (microemulsions) and the silica-encapsulated ZnSe QDs were obtained by a direct injection of tetraethyl orthosilicate (TEOS) into the microemulsion system. When the QDs were coated by silica, well-defined spherical shapes were formed and the average size of the QDs was near 7 nm. In addition, the photoluminescence (PL) efficiency of the QDs was reduced from 8.0 to 1.1% as they were encapsulated by silica. However, the solid layers of the silica-encapsulated ZnSe QDs on gold surfaces showed the excellent photostability. In particular, they are cadmium free and thus, less toxic. Moreover, the present method does not require a hot reaction temperature or extremely toxic H2Se gas as a Se precursor. Accordingly, the method can be a safer and more economical process for producing silica-encapsulated ZnSe QDs, which may be a potential media for biosensors.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.635-641
• /
• 2016

Sweet potato (Ipomoea batatas L.) shoot tips grown in vitro were successfully cryopreserved by encapsulation-vitrification. Encapsulated explants are very easily manipulated, due to the relatively large size of the alginate beads, and a large number of samples can be treated simultaneously. In this study, the effects of sucrose preculture, cryoprotectant preculture, and post-warm recovery media on regrowth, following liquid nitrogen (LN) exposure, were investigated to establish an efficient encapsulation-vitrification protocol for sweet potato. Shoot tips of plants grown in vitro were precultured in 0.3 M sucrose for 2 d before encapsulation. Encapsulated shoot tips were pre-incubated in liquid MS (Murashige and Skoog) medium containing 0.5 M sucrose for 16 h, before preculturing in sucrose-enriched medium (0.7 M sucrose) for 8 h. Shoot tips were osmoprotected with 35% plant vitrification solution 3 (PVS3) for 3 h, before being dehydrated with PVS3 for 2 h at $25^{\circ}C$. The encapsulated and dehydrated shoot tips were transferred to 2 mL cryotubes, suspended in 0.5 mL PVS3, and plunged directly into liquid N. High levels of shoot formation were obtained for the cv. Yeulmi (65.7%) and Yeonwhangmi (80.3%). The regrowth rates of cryopreserved samples in Yeulmi (78.9%) and Yeonwhangmi (91.3%), following culture on ammonium-free MS medium for 5 d, were much higher than those cultured on standard MS medium (65.7% and 80.3%, respectively). This encapsulation-vitrification is a promising method for the long-term preservation of sweet potato.

• Macromolecular Research
• /
• v.16 no.1
• /
• pp.45-50
• /
• 2008

This study examined the swelling behavior and in vitro release of a model drug, tetracycline-HCl, from alginate and alginate-polyaspartate (Alg-PASP) composite gel beads. The alginate and Alg-PASP composite beads were prepared using an ionic crosslinking method with aqueous $Ca^{2+}$. Their microporous morphology was observed by scanning electron microscopy. The swelling ratio of the beads in different media varied according to their composition, cross-linking density ($Ca^{2+}$ concentration), and pH of the aqueous medium. The in vitro release experiment of the tetracycline-HCl encapsulated beads in different media suggests that the release of the drug is governed mainly by the swelling properties of the polymer network. The presence of PASP was found to significantly influence the swelling properties and drug release profile.

• Journal of Aquaculture
• /
• v.12 no.1
• /
• pp.71-77
• /
• 1999

The potential utility of injection media (sucrose, PEG, and liposome) was demonstrated for direct gene transfer into olive flounder (Paralichthys olivaceus) muscles. Based on the use of sucrose (final cone. 20%), PEG 8,000 (final cone. 10%) or liposome (twice us of DNA injected), the present injection strategy significantly improved the level of transgene expression as well as persistent duration of expression. The increased amounts of expression in DNA injection with sucrose, PEG, and liposome were as high as from 2.1 to 4.9-folds of conventional TE-based DNA injection. The best result was obtained from injections of liposome-encapsulated DNA in which the expression was detectable at least 32 days after injection when compared to only 8-16 days from TE-based injections.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3121-3135
• /
• 2015

Owing to the increase in consumption of multimedia content and the improvement of device capacity, user demand for high-quality content has increased. However, it is difficult to transport such large amounts of content over the existing broadcasting network with limited bandwidth. To provide high-definition broadcasting, some studies suggest methods of transporting multimedia over heterogeneous networks after encoding content hierarchically. MPEG Media Transport (MMT), standardized by Moving Picture Experts Group (MPEG), is a solution that enables large-volume media transport over heterogeneous networks such as digital broadcasting networks and packet-switched networks. In the case of delivering a scalable encoded video over different networks, synchronization of each stream is an important issue. MMT defines a synchronization scheme, but does not contain sufficient functions to implement it. In this paper, we propose a synchronization scheme for media streams that are encoded hierarchically, divided into layers, and transported over heterogeneous networks. We implement our scheme using MMT and HTTP, and experimented using three encapsulated video streams with different durations. As a result, we show that the proposed scheme can reduce the waiting time to display high-quality video, relative to Dynamic Adaptive Streaming over HTTP-Scalable Video Coding (DASH-SVC) by requesting segments of enhanced layers after calculating the transmission time. Additionally, we find out that the selection of durations have a relation to the characteristics of the video.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.349-362
• /
• 1997

In order to make a meaningful multi-media object,it is usually necessary to apply a number of non-trival operations.If multi-media data can be encapsulated in a standaridized form and stored in a database,it is poss-ible to share and reuse multi-media data among users without repeating the same or similar operations. Based on the OLE component object model,this paper proposes the integrated computing enviroment for naive user to share and reuse of Ole objects.Various types of multi- media objects that are created by their appropriate OLE application programs can be aggreagated to form a multi-media document.In addition,the OLE objects can also be stored in database by a controlled manner.TheOLE object in a database can be retrieved by a visual query interface and reused to make a new document.This paper describes the common Platform to integrate various ment of OLE appfication programs,the separation process of an OLE object form a document,and the overall management of OLE object in a database.