• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.57-63
• /
• 2011

Dielectric Barrier Discharge (DBD) reactor with sinsodual AC type of power supply is very widely adopted for its compact size and effective discharging mechanism to generate high density of ozone radicals. However, at the aspect of design on power supply, its optimal switching conditions and topology is achieved by empirical test. Therefore, throughout this paper, it is proposed a design method of DBD power supply to guarantee a maximum ozone yield rate in accordance with DBD reactor modification and impedance variation when rapid gas discharging in the DBD reactor is proceeded.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권12호
• /
• pp.589-594
• /
• 2000

The fuzzy controllers have been applied to the power system stabilizer due to its excellent properties on the nonlinear systems. But the design process of fuzzy controller requires empirical and heuristic knowledge of human experts as well as many trial-and-errors in general. This process is time consuming task. This paper presents an parameters tuning method of the fuzzy power system stabilizer using the genetic algorithm and simulated annealing(SA). The proposed method searches the local minimum point using the simulated annealing algorithm. The proposed method is applied to the one-machine infinite-bus of a power system. Through the comparative simulation with conventional stabilizer and fuzzy stabilizer tuned by genetic algorithm under various operating conditions and system parameters, the robustness of fuzzy stabilizer tuned by proposed method with respect to the nonlinear power system is verified.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1554-1560
• /
• 2017

Prepare a lose of 765kV transmission route in power system operation condition, there are some Special Protection Scheme(SPS)s in Korean power system. These SPS can make some preselected generators are tripped to avoid generator overspeed. Because of many of the new large power plants are installed to existing power generation sites due to the siting problem, the number of generator tripped by SPS should be increased. But that can be a cause of system frequency change under the Under Frequency Relay(UFR) 1st pickup level 59.0Hz. Therefore generation constraint should be considered until new transmission lines are installed. In this paper, we propose the ESS application for generation constraint mitigation by frequency damping control of ESS. To analysis an effect of ESS application, we use PSS/E dynamic simulation tool, CBEST model and controller model. The proposed ESS application is applied to the empirical Korean power system.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.307-315
• /
• 2019

Condition monitoring has been recognized as an effective and low-cost method to enhance the reliability and improve the maintainability of power electronic converters. In power electronic converters, high-frequency oscillation occurs during the switching transients of power transistors, which is known as ringing. The ringing frequency mainly depends on the values of the parasitic capacitance and stray inductance in the oscillation loop. Although circuit stray inductance is an important factor that leads to the ringing, it does not change with transistor aging. A shift in either the inside inductance or junction capacitance is an important failure precursor for power transistors. Therefore, ringing frequency can be used to monitor the health of power transistors. However, the switching actions of power transistors usually result in a dynamic behavior that can generate oscillation signals mixed with background noise, which makes it hard to directly extract the ringing frequency. A frequency extraction method based on empirical mode decomposition (EMD) and Fast Fourier transformation (FFT) is proposed in this paper. The proposed method is simple and has a high precision. Simulation results are given to verify the ringing analysis and experimental results are given to verify the effectiveness of the proposed method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.604-604
• /
• 2005

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.278-281
• /
• 1998

This paper examines the mutlivariate nearest neighbor forecasting model which considers the volume traded as well as the stock price. The empirical results using the data from KOSPI indicate that the predictive power of the nearest neighbor model increases as the model becomes mutlivariate.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1989년도 추계학술발표회 발표논문초록집; 이화여자대학교, 서울; 23 Sep. 1989
• /
• pp.88-88
• /
• 1989

• 한국터널지하공간학회 논문집
• /
• 제20권4호
• /
• pp.687-699
• /
• 2018

해저터널의 시공은 육상터널의 시공과 몇 가지 다른 부분이 존재하는데 지하수 이외에 해수가 존재하여 고수압을 받으며, 시공 중 지반보강이 육상터널보다 매우 어려운 점 등이 대표적이다. 그러므로 해저터널 시공 시 시공트러블 발생의 예방은 매우 중요하다. 본 고에서는 서해안 해저 약 60 m에 시공한 소형 슬러리 TBM의 굴진 성능을 분석하기 위하여 대상 지반의 지질학적 특성들과 기계적 특성들을 DB로 구축하였다. 구축한 DB 중 추력, 토크 및 RPM 등이 순굴진율에 주는 영향을 확인하고자 각 변수들 간의 상관분석을 실시하였다. 또한 구축된 DB로부터 비에너지와 FPI와의 상관관계를 분석하고 순 굴진율을 예측할 수 있는 경험식을 제시하였다.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.59-64
• /
• 2023

본 논문은 전자기기에 사용되는 전원의 노이즈 저감을 위한 전도성(Conducted) EMI 필터의 경험적 설계를 통하여 제안하였다. 제안된 구조는 A형, B형, C형, D형의 구조를 설계하였으며, 다양한 X-커패스터와, Y-커패스터, Air-인덕터로 LC 네트워크 사용으로 전도성 노이즈 저감을 확인하였다. L1, L2는 10[μH]를 사용하였으며, C1, C2는 4.7[nF]를 사용하였다. 공통모드(Common Mode)용 L3는 13[μH]를 사용하였으며, C5, C6, C7은 10[nF]을 사용하여 설계하였다. 설계된 EMI 필터의 측정된 삽입손실 값은 3.2MHz에서 -74.4[dB], 4MHz에서 -75.4[dB], 13.56MHz에서 -75.3[dB]로 나타났다. 따라서 제안한 EMI 필터는 다양한 전자기기에 사용되는 전원 노이즈 저감에 이용될 것이다.

• 한국경영과학회지
• /
• 제40권3호
• /
• pp.1-21
• /
• 2015

Customer firms exercise various sources of power to influence their suppliers' behaviors or decisions. In this study we aim to examine the effects of customers' sources of power on their supplier's performance improvement. This study posits that a customer's expert, referent, and reward power positively influence a supplier's performance directly as well as indirectly through increased supplier-customer integration. On the contrary, the customer's coercive power is expected to worsen the supplier's operational performance because of increasing distrust, dissatisfaction, and conflict with the customer. Data collected from 1,229 firms from Korea, China, Hong Kong, Taiwan, and the U.S. are used to test the hypotheses. Expert power proves to be the most effective source of customer power in improving a supplier's inventory cost, delivery, and flexibility performance. In contrast, coercive power deteriorates significantly all supplier performance variables. Academic and managerial implications are presented and future research directions are also discussed.