• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.49-53
• /
• 2016

A new large-signal model including the voltage-dependent extrinsic gate capacitance for RF channel distribution effect is developed for a high resistivity(HR) silicon-on-insulator(SOI) RF accumulation-mode MOS varactor. The data of voltage-dependent parameters are extracted by using accurate S-parameter optimization, and empirical model equations are constructed by data fitting process. The RF accuracy of this new model is validated by observing excellent agreements between modeled and measured Y11-parameter data in the wide voltage range up to 20 GHz.

• Geomechanics and Engineering
• /
• v.9 no.1
• /
• pp.101-113
• /
• 2015

Saturated soil hydraulic conductivity is a very important soil parameter in numerous practical engineering applications, especially rainfall infiltration and slope stability problems. This parameter is difficult to measure since it is very highly sensitive to various soil conditions. There have been many analytical and empirical formulas to predict saturated soil hydraulic conductivity based on experimental data. However, there have been few studies to investigate in-situ hydraulic conductivity of weathered granite soils, which constitute the majority of soil slopes in Korea. This paper introduces an estimation method to derive saturated hydraulic conductivity of Korean weathered granite soils using in-situ experimental data which were obtained from a variety of slope areas of South Korea. A robust regression analysis was performed using different physical soil properties and an empirical solution with an $R^2$ value of 0.9193 was suggested. Besides that this research validated the proposed model by conducting in-situ saturated soil hydraulic conductivity tests in two slope areas.

• Steel and Composite Structures
• /
• v.42 no.5
• /
• pp.657-669
• /
• 2022

Structural materials can experience large plastic deformation under extreme cyclic loading that is caused by events like earthquakes. To evaluate the seismic safety of a structure, accurate numerical material models should be used. For a steel structure, the cyclic strain hardening behavior of structural steel should be correctly modeled. In this study, a combined hardening model, consisting of one isotropic hardening model and three nonlinear kinematic hardening models, was used. To determine the values of the combined hardening model parameters efficiently and accurately, the improved opposition-based particle swarm optimization (iOPSO) model was adopted. Low-cycle fatigue tests were conducted for three steel grades commonly used in Korea and their modeling parameters were determined using iOPSO, which was first developed in Korea. To avoid expensive and complex low cycle fatigue (LCF) tests for determining the combined hardening model parameter values for structural steel, empirical equations were proposed for each of the combined hardening model parameters based on the LCF test data of 21 steel grades collected from this study. In these equations, only the properties obtained from the monotonic tensile tests are required as input variables.

• Journal of the Korean Data and Information Science Society
• /
• v.8 no.1
• /
• pp.21-30
• /
• 1997

In accelerated life tests, the failure time of an item is observed under a high stress level, and based on the time the performances of items are investigated at the normal stress level. In this paper, when the mean of the prior of a failure rate is known in the exponential lifetime distribution with censored accelerated failure time data, we utilize the empirical Bayesian method by using the moment estimators in order to estimate the parameters of the prior distribution and obtain the empirical Bayesian predictive density and predictive intervals for a future observation under the normal stress level.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.23-29
• /
• 2016

Rotary machine is major equipment in industry. The rotary machine is applied for a machine tool, ship, vehicle, power plant, and so on. But a spindle fault increase product's expense and decrease quality of a workpiece in machine tool. A turbine in power plant is directly connected to human safety. National crisis could be happened by stopping of rotary machine in nuclear plant. Therefore, it is very important to know rotary machine condition in industry field. This study mentioned fault diagnosis algorithm with statistical parameter and empirical mode decomposition. Vibration locations can be found by analyze kurtosis of data from triaxial axis. Support vector of data determine threshold using hyperplane with fault location. Empirical mode decomposition is used to find fault caused by intrinsic mode. This paper suggested algorithm to find direction and causes from generated fault.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.783-790
• /
• 2017

The energy band gaps and the bowing parameters of zincblende GaP1-xNx on the variation of temperature and composition are determined by using an empirical pseudopotential method with another virtual crystal approximation, which includes the disorder effect. The bowing parameter calculated is 13.1eV and the energy band gaps are decreased rapidly for GaP1-xNx ($0{\leq}x{\leq}0.05$, 300K). A refractive index n and a function of real dielectric constant ${\varepsilon}$ are calculated by the results of energy band gaps and the calculation results of energy band gaps are consistent with experimental values.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.145-153
• /
• 2004

Based on the previous studies proposed by many researchers about the evaluation method of replacement depth, a modified formula which incorporates the effect factors such as embanked height and load, replacement depth, cohesive force of original ground and unit weight of embankment etc, was suggested in this study. The new proposed formula was applied in the three construction sites of Kwangyang-Bay Area (Yeocheon, Youlchon, and Kwangyang) constructed by the compulsion replacement method. The application of the new method was investigated through these case studies in domestics. A modified bearing capacity parameter was estimated form the relationship of modified embankment loading and ultimate bearing capacity resulted from the site investigation, and the replacement depth was predicted by using this parameter. In addition, through the relationship analyses between each effect factors to the replacement depth in two areas, Yeocheon and Youlchon, an empirical prediction method which can evaluate the replacement depth in adjoining area was proposed. The predicted value obtained by new method is approximately similar to the measured replacement depth in Kwangyang area.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.107-115
• /
• 1999

In order to develop a convenient method for the estimation of transport distance of settling stones in quiescent water or flowing water, introduced was the simple but relatively accurate equation of drag coefficient. The equation of drag coefficient introduced was confirmed to give relatively accurate evaluation for the drag force of smooth-surface sphere, and the effects of surface roughness and shape can be considered by adjusting empirical parameters. A theoretical equation has been developed for the settling velocity or settling distance of smooth-surface sphere in quiescent fluid, and the computation results have been obtained by adjusting the empirical parameter for the settling distance of stone in quiescent water. The 2nd order ordinary differential equation has been developed for the case of settling stones in flowing fluid, and a numerical model has been developed by using Runge-Kutta method for its solution. A number of cases have been tested by adjusting the empirical parameter.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.125-130
• /
• 2009

Storage function method which considers the non-linearity of the relationship between rainfall and runoff has been frequently used to predict runoff in a basin and a flood pattern. However, it is time-consuming to estimate appropriate parameters of every basin and rainfall event, which requires the empirical parameter equation applicable in Korea. In this study, multiple regression analysis is used to develop empirical equations to estimate parameters of Storage Function method using basin characteristics. The basin area, maximum stream length, and stream slope are considered as the basin characteristics as the result of the regression analysis. Collinearity is removed and trial-and-error method is used to choose the most descriptive parameters to the dependent variables in Han River basin which is divided into 30 subbasins. The developed equations are validated using the rainfall events in MunMak gauging station and named as 'Han River equation'. The equation could provide the useful information about Storage Function method parameter to calculate runoff from a basin and predict river stage.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1680-1686
• /
• 2009

Flow characteristics of a differential pressure flow meters which have a shape of triangular separate bar (TSB) was investigated according to machining conditions in pressure tapping holes. Size of pressure tapping holes is machined with either 1.0 mm or 1.5 mm in diameter. Also, number of pressure tapping holes are drilled either 9 or 17. The mass flow rate of the TSB flow meters are calibrated with a laminar flow meter by connecting them in line. The mass flow rate in the TSB flow meters are plotted with a non-dimensional parameter H which includes the gas temperature, exhaust gas pressure and differential pressure at the flow meters, and atmospheric pressure. An empirical correlation between the mass flow rate at the TSB flow meter and the non-dimensional parameter H was obtained. The empirical correlation showed highly linear relationship between the mass flow rate and the non-dimensional parameter H. The hole size of the pressure tapping holes has a bigger effect on the flow rate than the number of the tapping holes.