Browse > Article
http://dx.doi.org/10.12989/scs.2022.42.5.657

Efficient determination of combined hardening parameters for structural steel materials  

Han, Sang Whan (Department of Architectural Engineering, Hanyang University)
Hyun, Jungho (Department of Architectural Engineering, Hanyang University)
Cho, EunSeon (Department of Architectural Engineering, Hanyang University)
Lee, Kihak (Department of Architectural Engineering, Sejong University)
Publication Information
Steel and Composite Structures / v.42, no.5, 2022 , pp. 657-669 More about this Journal
Abstract
Structural materials can experience large plastic deformation under extreme cyclic loading that is caused by events like earthquakes. To evaluate the seismic safety of a structure, accurate numerical material models should be used. For a steel structure, the cyclic strain hardening behavior of structural steel should be correctly modeled. In this study, a combined hardening model, consisting of one isotropic hardening model and three nonlinear kinematic hardening models, was used. To determine the values of the combined hardening model parameters efficiently and accurately, the improved opposition-based particle swarm optimization (iOPSO) model was adopted. Low-cycle fatigue tests were conducted for three steel grades commonly used in Korea and their modeling parameters were determined using iOPSO, which was first developed in Korea. To avoid expensive and complex low cycle fatigue (LCF) tests for determining the combined hardening model parameter values for structural steel, empirical equations were proposed for each of the combined hardening model parameters based on the LCF test data of 21 steel grades collected from this study. In these equations, only the properties obtained from the monotonic tensile tests are required as input variables.
Keywords
combined hardening model; empirical equation; inelastic cyclic; low cycle fatigue test; model parameter; optimization; regression; structural steel;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Shi, G., Wang, M., Bai, Y., Wang, F., Shi, Y. and Wanf, Y. (2012), "Experimental and modeling study of high-strength structural steel under cyclic loading", Eng. Struct., 37, 1-13. https://doi.org/10.1016/j.engstruct.2011.12.018.   DOI
2 Versaillot, P.D. (2017), Effects of Cyclic Loading on the Mechanical Properties of Steel, Ph.D. Dissertation, University of Politehnica Timisoara, Romania.
3 Zhou, F., Chen, Y. and Wu, Q. (2015), "Dependence of the cyclic response of structural steel on loading history under large inelastic strains", J. Constr. Steel. Res., 104, 64-73. https://doi.org/10.1016/j.jcsr.2014.09.019.   DOI
4 Omran, M.G.H. and Al-Sharhan, S. (2008), "Using opposition-based learning to improve the performance of particle swarm optimization", Proceedings of the 2008 IEEE Swarm Intelligence Symposium, U.S.A.
5 Mao, C., Ricles, J., Lu, L. and Fisher, J. (2001), "Effect of local details on ductility of welded moment connections", J. Struct. Eng., ASCE, 127(9), 1036-1044. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1036).   DOI
6 Mahmoudi, A.H., Pezeshki-Najafabadi, S.M. and Badnava, H. (2011), "Parameter determination of Chaboche kinematic hardening model using a multi objective Genetic Algorithm", Comput. Mater. Sci., 50(3), 1114-1122. https://doi.org/10.1016/j.commatsci.2010.11.010.   DOI
7 Uang, C. (1991), "Establishing R (or Rw) and Cd factors for building seismic provisions", J. Struct. Eng., ASCE, 117(1), 19-28. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(19)   DOI
8 Yamada, S., Lee, D., Jiao, Y., Ishida, T. and Kishiki, S. (2019), "A concise hysteresis model of high performance 590MPa steel grade considering the bauschinger effect", Proceeding of the 10th International Symposium on Steel Structures, Korea.
9 Shi, Y., Wang, M. and Wang, Y. (2011), "Experimental and constitutive model study of structural steel under cyclic loading", J. Constr. Steel. Res., 67(8), 1185-1197. https://doi.org/10.1016/j.jcsr.2011.02.011.   DOI
10 Silvestre, E., Mendiguren, J., Galdos L. and De Argandona, E.S. (2015), "Comparison of the hardening behaviour of different steel families: from mild and stainless steel to advanced high strength steels", Int. J. Mech. Sci., 101, 10-20. https://doi.org/10.1016/j.ijmecsci.2015.07.013.   DOI
11 Chaparroa, B.M., Thuillier, S., Menezesc, F., Manach, P.Y. and Fernandes, J.V. (2008), "Material parameters identification: Gradient-based, genetic and hybrid optimization algorithms", Comput. Mater. Sci., 44(2), 339-346. https://doi.org/10.1016/j.commatsci.2008.03.028.   DOI
12 Yu, Y., Wang X. and Chen Z. (2017), "Evaluation on steel cyclic response to strength reducing heat treatment for seismic design application", Construct. Build. Mater., 140, 468-484. https://doi.org/10.1016/j.conbuildmat.2017.02.088.   DOI
13 NIST (2017), Guidelines for Nonlinear Structural Analysis for Design of Buildings, National Institute of Standards and Technology, Research Report No. GCR 17-917-46v1, Gathisburgh, MD, U.S.A.
14 Prager, W. (1949), "Recent developments in the mathematical theory of plasticity", J. Appl. Phys., 20(3), 235-241. https://doi.org/10.1063/1.1698348.   DOI
15 Applied Technology Council in Cooperation with the Pacific Earthquake Engineering Research Center (PEER/ATC 72-1) (2010), Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings, PEER/ATC.
16 ASCE 7-16 (2016), Minimum Design Loads and Associated Criteria for Buildings and Other Structures, American Society of Civil Engineers, Reston, VA, U.S.A.
17 ASTM E606/E606M (2012), Standard Test Method for Strain-Controlled Fatigue Testing, American Society for Testing and Materials, West Conshohocken, PA, U.S.A.
18 ASTM E8/E8M (2016), Standard Test Methods for Tension Testing of Metallic Materials, American Society for Testing and Materials, West Conshohocken, PA, U.S.A.
19 Badnava, H., Farhoudi, H.R., Fallah Nejad, Kh. and Pezeshki, S.M. (2012), "Ratcheting behavior of cylindrical pipes based on the Chaboche kinematic hardening rule", J. Mech. Sci. Technol., 26, 3073-3079. https://doi.org/10.1007/s12206-012-0834-4.   DOI
20 Chaboche, J.L., Dang-Van, K. and Cordier, G. (1979), "Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel", Proceedings of the 5th International Conference on SMiRT, Berlin, Germany, August.
21 Chen, X. and Chen, X. (2016), "Effect of local wall thinning on ratcheting behavior of pressurized 90° elbow pipe under reversed bending using finite element analysis", Steel Compos. Struct., 20(4), 931-950. https://doi.org/10.12989/scs.2016.20.4.931.   DOI
22 Jia, L.J. and Kuwamura, H. (2014), "Prediction of cyclic behaviors of mild steel at large plastic strain using coupon test results", J. Struct. Eng., 140. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000848.   DOI
23 Han, S.W., Kim, N.H. and Cho, S.W. (2016), "Prediction of cyclic behavior of WUF-W connections with various weld access hole configurations using nonlinear FEA", Int. J. Steel. Struct., 16, 1197-1208. https://doi.org/10.1007/s13296-016-0057-0.   DOI
24 Hilditch, T.B., Timokhina, I.B., Robertson, L.T., Pereloma, E.V. and Hodgson, P.D. (2009), "Cyclic deformation of advanced high-strength steels: mechanical behavior and microstructural analysis", Metallurgic. Mater. Transactions A, 40A, 342-353. https://doi.org/10.1007/s11661-008-9732-x.   DOI
25 Jabeen, H., Jalil, Z. and Baig, A.R. (2009), "Opposition based initialization in particle swarm optimization (O-PSO)", Proceedings of the 11th Annual Conference Companion on Genetic and Evolutionary Computation Conference: Late Breaking Papers, 2047-2052.
26 Chaboche, J.L. (1986), "Time-independent constitutive theories for cyclic plasticity", Int. J. Plast, 2(2), 149-188. https://doi.org/10.1016/0749-6419(86)90010-0.   DOI
27 Eberhart, R. and Kennedy, J. (1995), "A new optimizer using particle swarm theory", Proceedings of the Sixth International Symposium on Micro Machine and Human Science, 39-43.
28 Hu, F., Shi, G. and Shi, Y. (2016), "Constitutive model for fullrange elasto-plastic behavior of structural steels with yield plateau: calibration and validation", Eng. Struct., 118, 210-227. https://doi.org/10.1016/j.engstruct.2016.03.060.   DOI
29 KS D 3503 (2018), Rolled Steels for General Structure, Korean Agency for Technology and Standards, Seoul, Korea.
30 Ho, H.C., Liu, X., Chung, K.F., Elghazouli, A.Y. and Xiao, M. (2018), "Hysteretic behavior of high strength S690 steel materials under low cycle high strain tests", Eng. Struct., 165, 222-236. https://doi.org/10.1016/j.engstruct.2018.03.041.   DOI
31 KS D 5994 (2018), High-Performance Rolled Steel for Building Structures, Korean Agency for Technology and Standards, Seoul, Korea.
32 Kaufmann, E.J., Metrovich, B. and Pense, A.W. (2001), "Characterization of cyclic inelastic strain behavior on properties of A572 Gr. 50 and A913 Gr. 50 rolled sections", Report No. 01-13, ATLSS, PA, U.S.A.
33 Kolasangiani, K., Farhangdoost, M., Shariati, M. and Varvani-Farahani, A. (2018), "Local ratcheting behavior in notched 1045 steel plates", Steel Compos. Struct., 28(1), 1-11. https://doi.org/10.12989/scs.2018.28.1.001.   DOI
34 KS D 3515 (2018), Rolled Steels for Welded Structures, Korean Agency for Technology and Standards, Seoul, Korea.
35 Li, J., Li, Q. and Jiang, D. (2108), "Particle swarm optimization procedure in determining parameters in Chaboche kinematic hardening model to assess ratcheting under uniaxial and biaxial loading cycles", Fatigue Fract. Eng. Mater. Struct. 41, 1637-1645. https://onlinelibrary.wiley.com/doi/full/10.1111/ffe.12802.   DOI