DOI QR코드

DOI QR Code

Efficient determination of combined hardening parameters for structural steel materials

  • Han, Sang Whan (Department of Architectural Engineering, Hanyang University) ;
  • Hyun, Jungho (Department of Architectural Engineering, Hanyang University) ;
  • Cho, EunSeon (Department of Architectural Engineering, Hanyang University) ;
  • Lee, Kihak (Department of Architectural Engineering, Sejong University)
  • 투고 : 2020.10.20
  • 심사 : 2022.01.02
  • 발행 : 2022.03.10

초록

Structural materials can experience large plastic deformation under extreme cyclic loading that is caused by events like earthquakes. To evaluate the seismic safety of a structure, accurate numerical material models should be used. For a steel structure, the cyclic strain hardening behavior of structural steel should be correctly modeled. In this study, a combined hardening model, consisting of one isotropic hardening model and three nonlinear kinematic hardening models, was used. To determine the values of the combined hardening model parameters efficiently and accurately, the improved opposition-based particle swarm optimization (iOPSO) model was adopted. Low-cycle fatigue tests were conducted for three steel grades commonly used in Korea and their modeling parameters were determined using iOPSO, which was first developed in Korea. To avoid expensive and complex low cycle fatigue (LCF) tests for determining the combined hardening model parameter values for structural steel, empirical equations were proposed for each of the combined hardening model parameters based on the LCF test data of 21 steel grades collected from this study. In these equations, only the properties obtained from the monotonic tensile tests are required as input variables.

키워드

과제정보

It is acknowledged that this research was financially supported by the National Research Foundation of Korea (2020R1A2C2010548).

참고문헌

  1. Applied Technology Council in Cooperation with the Pacific Earthquake Engineering Research Center (PEER/ATC 72-1) (2010), Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings, PEER/ATC.
  2. ASCE 7-16 (2016), Minimum Design Loads and Associated Criteria for Buildings and Other Structures, American Society of Civil Engineers, Reston, VA, U.S.A.
  3. ASTM E606/E606M (2012), Standard Test Method for Strain-Controlled Fatigue Testing, American Society for Testing and Materials, West Conshohocken, PA, U.S.A.
  4. ASTM E8/E8M (2016), Standard Test Methods for Tension Testing of Metallic Materials, American Society for Testing and Materials, West Conshohocken, PA, U.S.A.
  5. Badnava, H., Farhoudi, H.R., Fallah Nejad, Kh. and Pezeshki, S.M. (2012), "Ratcheting behavior of cylindrical pipes based on the Chaboche kinematic hardening rule", J. Mech. Sci. Technol., 26, 3073-3079. https://doi.org/10.1007/s12206-012-0834-4.
  6. Chaboche, J.L., Dang-Van, K. and Cordier, G. (1979), "Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel", Proceedings of the 5th International Conference on SMiRT, Berlin, Germany, August.
  7. Chaboche, J.L. (1986), "Time-independent constitutive theories for cyclic plasticity", Int. J. Plast, 2(2), 149-188. https://doi.org/10.1016/0749-6419(86)90010-0.
  8. Chaparroa, B.M., Thuillier, S., Menezesc, F., Manach, P.Y. and Fernandes, J.V. (2008), "Material parameters identification: Gradient-based, genetic and hybrid optimization algorithms", Comput. Mater. Sci., 44(2), 339-346. https://doi.org/10.1016/j.commatsci.2008.03.028.
  9. Chen, X. and Chen, X. (2016), "Effect of local wall thinning on ratcheting behavior of pressurized 90° elbow pipe under reversed bending using finite element analysis", Steel Compos. Struct., 20(4), 931-950. https://doi.org/10.12989/scs.2016.20.4.931.
  10. Eberhart, R. and Kennedy, J. (1995), "A new optimizer using particle swarm theory", Proceedings of the Sixth International Symposium on Micro Machine and Human Science, 39-43.
  11. Han, S.W., Kim, N.H. and Cho, S.W. (2016), "Prediction of cyclic behavior of WUF-W connections with various weld access hole configurations using nonlinear FEA", Int. J. Steel. Struct., 16, 1197-1208. https://doi.org/10.1007/s13296-016-0057-0.
  12. Hilditch, T.B., Timokhina, I.B., Robertson, L.T., Pereloma, E.V. and Hodgson, P.D. (2009), "Cyclic deformation of advanced high-strength steels: mechanical behavior and microstructural analysis", Metallurgic. Mater. Transactions A, 40A, 342-353. https://doi.org/10.1007/s11661-008-9732-x.
  13. Ho, H.C., Liu, X., Chung, K.F., Elghazouli, A.Y. and Xiao, M. (2018), "Hysteretic behavior of high strength S690 steel materials under low cycle high strain tests", Eng. Struct., 165, 222-236. https://doi.org/10.1016/j.engstruct.2018.03.041.
  14. Hu, F., Shi, G. and Shi, Y. (2016), "Constitutive model for fullrange elasto-plastic behavior of structural steels with yield plateau: calibration and validation", Eng. Struct., 118, 210-227. https://doi.org/10.1016/j.engstruct.2016.03.060.
  15. Jabeen, H., Jalil, Z. and Baig, A.R. (2009), "Opposition based initialization in particle swarm optimization (O-PSO)", Proceedings of the 11th Annual Conference Companion on Genetic and Evolutionary Computation Conference: Late Breaking Papers, 2047-2052.
  16. Jia, L.J. and Kuwamura, H. (2014), "Prediction of cyclic behaviors of mild steel at large plastic strain using coupon test results", J. Struct. Eng., 140. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000848.
  17. Kaufmann, E.J., Metrovich, B. and Pense, A.W. (2001), "Characterization of cyclic inelastic strain behavior on properties of A572 Gr. 50 and A913 Gr. 50 rolled sections", Report No. 01-13, ATLSS, PA, U.S.A.
  18. Kolasangiani, K., Farhangdoost, M., Shariati, M. and Varvani-Farahani, A. (2018), "Local ratcheting behavior in notched 1045 steel plates", Steel Compos. Struct., 28(1), 1-11. https://doi.org/10.12989/scs.2018.28.1.001.
  19. KS D 3503 (2018), Rolled Steels for General Structure, Korean Agency for Technology and Standards, Seoul, Korea.
  20. KS D 3515 (2018), Rolled Steels for Welded Structures, Korean Agency for Technology and Standards, Seoul, Korea.
  21. KS D 5994 (2018), High-Performance Rolled Steel for Building Structures, Korean Agency for Technology and Standards, Seoul, Korea.
  22. Li, J., Li, Q. and Jiang, D. (2108), "Particle swarm optimization procedure in determining parameters in Chaboche kinematic hardening model to assess ratcheting under uniaxial and biaxial loading cycles", Fatigue Fract. Eng. Mater. Struct. 41, 1637-1645. https://onlinelibrary.wiley.com/doi/full/10.1111/ffe.12802.
  23. Mao, C., Ricles, J., Lu, L. and Fisher, J. (2001), "Effect of local details on ductility of welded moment connections", J. Struct. Eng., ASCE, 127(9), 1036-1044. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1036).
  24. Mahmoudi, A.H., Pezeshki-Najafabadi, S.M. and Badnava, H. (2011), "Parameter determination of Chaboche kinematic hardening model using a multi objective Genetic Algorithm", Comput. Mater. Sci., 50(3), 1114-1122. https://doi.org/10.1016/j.commatsci.2010.11.010.
  25. NIST (2017), Guidelines for Nonlinear Structural Analysis for Design of Buildings, National Institute of Standards and Technology, Research Report No. GCR 17-917-46v1, Gathisburgh, MD, U.S.A.
  26. Omran, M.G.H. and Al-Sharhan, S. (2008), "Using opposition-based learning to improve the performance of particle swarm optimization", Proceedings of the 2008 IEEE Swarm Intelligence Symposium, U.S.A.
  27. Prager, W. (1949), "Recent developments in the mathematical theory of plasticity", J. Appl. Phys., 20(3), 235-241. https://doi.org/10.1063/1.1698348.
  28. Shi, Y., Wang, M. and Wang, Y. (2011), "Experimental and constitutive model study of structural steel under cyclic loading", J. Constr. Steel. Res., 67(8), 1185-1197. https://doi.org/10.1016/j.jcsr.2011.02.011.
  29. Shi, G., Wang, M., Bai, Y., Wang, F., Shi, Y. and Wanf, Y. (2012), "Experimental and modeling study of high-strength structural steel under cyclic loading", Eng. Struct., 37, 1-13. https://doi.org/10.1016/j.engstruct.2011.12.018.
  30. Silvestre, E., Mendiguren, J., Galdos L. and De Argandona, E.S. (2015), "Comparison of the hardening behaviour of different steel families: from mild and stainless steel to advanced high strength steels", Int. J. Mech. Sci., 101, 10-20. https://doi.org/10.1016/j.ijmecsci.2015.07.013.
  31. Uang, C. (1991), "Establishing R (or Rw) and Cd factors for building seismic provisions", J. Struct. Eng., ASCE, 117(1), 19-28. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(19)
  32. Versaillot, P.D. (2017), Effects of Cyclic Loading on the Mechanical Properties of Steel, Ph.D. Dissertation, University of Politehnica Timisoara, Romania.
  33. Yamada, S., Lee, D., Jiao, Y., Ishida, T. and Kishiki, S. (2019), "A concise hysteresis model of high performance 590MPa steel grade considering the bauschinger effect", Proceeding of the 10th International Symposium on Steel Structures, Korea.
  34. Yu, Y., Wang X. and Chen Z. (2017), "Evaluation on steel cyclic response to strength reducing heat treatment for seismic design application", Construct. Build. Mater., 140, 468-484. https://doi.org/10.1016/j.conbuildmat.2017.02.088.
  35. Zhou, F., Chen, Y. and Wu, Q. (2015), "Dependence of the cyclic response of structural steel on loading history under large inelastic strains", J. Constr. Steel. Res., 104, 64-73. https://doi.org/10.1016/j.jcsr.2014.09.019.