• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.252.2-252.2
• /
• 2013

ZnO nanostructures have a lot of interest for decades due to its varied applications such as light-emitting devices, power generators, solar cells, and sensing devices etc. To get the high performance of these devices, the factors of nanostructure geometry, spacing, and alignment are important. So, Patterning of vertically- aligned ZnO nanowires are currently attractive. However, many of ZnO nanowire or nanorod fabrication methods are needs high temperature, such vapor phase transport process, metal-organic chemical vapor deposition (MOCVD), metal-organic vapor phase epitaxy, thermal evaporation, pulse laser deposition and thermal chemical vapor deposition. While hydrothermal process has great advantages-low temperature (less than $100^{\circ}C$), simple steps, short time consuming, without catalyst, and relatively ease to control than as mentioned various methods. In this work, we investigate the dependence of ZnO nanowire alignment and morphology on si substrate using of nanosphere template with various precursor concentration and components via hydrothermal process. The brief experimental scheme is as follow. First synthesized ZnO seed solution was spun coated on to cleaned Si substrate, and then annealed $350^{\circ}C$ for 1h in the furnace. Second, 200nm sized close-packed nanospheres were formed on the seed layer-coated substrate by using of gas-liquid-solid interfacial self-assembly method and drying in vaccum desicator for about a day to enhance the adhesion between seed layer and nanospheres. After that, zinc oxide nanowires were synthesized using a low temperature hydrothermal method based on alkali solution. The specimens were immersed upside down in the autoclave bath to prevent some precipitates which formed and covered on the surface. The hydrothermal conditions such as growth temperature, growth time, solution concentration, and additives are variously performed to optimize the morphologies of nanowire. To characterize the crystal structure of seed layer and nanowires, morphology, and optical properties, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and photoluminescence (PL) studies were investigated.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.963-969
• /
• 2014

본 연구는 고회분탄의 최적화된 연소 조건을 알아보기 위해 회분 함량이 각기 다른 네 종류 석탄의 연소시 배출되는 NOx및 미연분 특성을 알아보았다. 실험은 DTF(Drop Tube Furnace)를 통해서 다양한 입자크기조건 및 공기다단방식을 도입하여 수행하였다. 결과로 회분의 함량이 증가할수록 미연분이 증가하며, 입자크기가 증대될수록 미연분에 대한 회분의 영향이 명확해짐을 확인하였다. 또한, 회분의 함량이 증가할수록 Char-NOx가 감소하며, 입자크기가 감소할수록 NOx의 배출이 감소하는 것을 확인하였다. 본 연구는 고회분탄의 NOx를 저감하는 방법으로 공기다단방식의 적용을 제안하며 전단 연소 영역의 공기과잉률 변화를 통한 최적화된 연소조건을 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.152-159
• /
• 2010

최근 친환경 재료와 구조물에 대한 관심이 증대되면서 친환경 재료인 황토에 대한 연구가 활발히 진행되고 있다. 황토는 건설 및 마감 재료로 사용된 전통적인 친환경 건설 재료 중의 하나이다. 황토는 높은 축열성, 습도 조절 능력, 자정력, 탈취 및 항균성능, 인체에 유익한 다량의 원적외선이 방사되는 점 등 건설 재료로서 많은 장점을 갖고 있다. 그러나, 황토는 낮은 강도특성과 건조수축 균열 특성 때문에 현대 건설에 사용되지 않고 있는 실정이다. 최근 연구자들의 연구결과에 따르면, 황토는 플라이 애쉬나 포졸란 같은 천연 포졸란 재료로 사용될 수 있다. 본 논문에서는 황토와 슬래그, 재생 PET 섬유가 혼입된 콘크리트의 역학적 성질과 구조적인 휨 거동 실험을 수행하였다. 실험 결과 황토콘크리트의 압축강도와 탄성계수는 기준 시멘트 콘크리트 시편보다 상대적으로 낮게 평가되었으며, 철근 콘크리트 보의 휨 거동은 거의 유사하게 나타났다.

• 한국식품영양과학회지
• /
• 제27권5호
• /
• pp.980-986
• /
• 1998

The effects of mungbean sprout juice on cadmium-induced hepatotoxicity in rats were investigated. Sprague-Dawley rats weighing about 90g were divided into 4 groups and raised for 6 weeks. ; control group(CON), mungbean sprouts juice-administered group(MSJ), cadmium-administered group(CAD) fed water containing 40 ppm cadmium chloride and mung bean sprouts juice and cadmium-administered group(MCD). The diet was supplied every day for the measurement of feed efficiency ratio(FER) and net weight gain was measured every 3 days. The activities of serum glutamic oxaloactic transaminase(GOT) and glutamic pyruvic transaminase(GPT), superoxide dimutase(SOD), catalase and glutathione peroxidase(GSH-Px) in the liver and the hepatic contents of glutathione were examined. The contents of Cd in liver and kidney of the rats were determined by using ICP(Inductively Coupled Plasma Emission Spectrophotometer). Growth rate and FER were decreased in CAD group, compared with CON group but the changes were not significant in MCD group. The activities of serum GOT and GPT, SOD, catalase and GSH-Px in the liver were increased by Cd administration, but the alterations were decreased by supplementation with mungbean sprouts juice. The level of glutathione decreased in CAD group(26.8$\pm$9.0mg/g liver), whereas it increased in MCD group(36.4$\pm$15.8mg gliver). The content of Cd in the liver and kidney in MCD group(9.57 ppm, 4.88 ppm) was decreased, compared with CAD group(12.81 ppm, 5.46 ppm). This result suggested that mungbean sprout juice has a lowering effect on the accumulation of Cd in the liver and kidney and it is believed that the juice has some protective effects to Cd-induced hepatotoxicity in rats, but the mechanism of these effects was obscure.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권12호
• /
• pp.1864-1872
• /
• 2019

Objective: This study was conducted to evaluate the effects of Ecklonia stolonifera (E. stolonifera) extract addition on in vitro ruminal fermentation characteristics, methanogenesis and microbial populations. Methods: One cannulated Holstein cow ($450{\pm}30kg$) consuming timothy hay and a commercial concentrate (60:40, w/w) twice daily (09:00 and 17:00) at 2% of body weight with free access to water and mineral block were used as rumen fluid donors. In vitro fermentation experiment, with timothy hay as substrate, was conducted for up to 72 h, with E. stolonifera extract added to achieve final concentration 1%, 3%, and 5% on timothy hay basis. Results: Administration of E. stolonifera extract to a ruminant fluid-artificial saliva mixture in vitro increased the total gas production. Unexpectedly, E. stolonifera extracts appeared to increase both methane emissions and hydrogen production, which is contrasts with previous observations with brown algae extracts used under in vitro fermentation conditions. Interestingly, real-time polymerase chain reaction indicated that as compared with the untreated control the ciliate-associated methanogen and Fibrobacter succinogenes populations decreased, whereas the Ruminococcus flavefaciens population increased as a result of E. stolonifera extract supplementation. Conclusion: E. stolonifera showed no detrimental effect on rumen fermentation characteristics and microbial population. Through these results E. stolonifera has potential as a viable feed supplement to ruminants.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.505-513
• /
• 2005

We measured the time-dependent concentration of VOCs emitted from Ondol floor, furniture, and the wall made of various building materials. After obtaining results from the previous measurement, we developed the estimation equations of the concentration decay, and obtained the estimated graphs for the concentration decay under different air change rates and loading factor conditions by using the estimated equations. We conducted our tests by applying our measurements to real residences for 110 days in the case of furniture and for 40 days in the case of the floor. We also conducted experiments in the cases of various wall materials for 7 days which totaled 10 times. We used the GC/FID for experiments for real residences accord-ing to the specified procedures of the NIOSH 1501, and carried out experiments for wall materials according to the specified procedures of the ASTM 5116-97. When conducting experiments for wall materials, we set the temperature and relative humidity at $23^{\circ}C$ and $50\%$, respectively. We also set the air change rate and loading factor at 0.7/h and $1.617 m^2/m^3$, respectively. Our results showed that it is possible to predict proplrly the time-dependent concentration decay of VOCs by using logarithmic functions in both cases of experiments for real residences and for wall materials. Furthermore, we found that the concentration decay rate of VOCs increased rapidly as the air exchange rate increased while the concentration decay rate decreased as the loading factor increased.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.256-260
• /
• 2014

Columnar-structured cesium iodide (CsI) scintillators doped with thallium (Tl) are frequently used as x-ray converters in medical and industrial imaging. In this study we investigated the imaging characteristics of CsI:Tl films with various reflective layers-aluminum (Al), chromium (Cr), and titanium dioxide ($TiO_2$) powder-coated on glass substrates. We used two effusion-cell sources in a thermal evaporator system to fabricate CsI:Tl films on substrates. The scintillators were observed via scanning electron microscopy (SEM), and scintillation characteristics were evaluated on the basis of the emission spectrum, light output, light response to x-ray dose, modulation transfer function (MTF), and x-ray images. Compared to control films without a reflective layer, CsI:Tl films with reflective layers showed better sensitivity and light collection efficiency, and the film with a $TiO_2$ reflective layer showed the best properties.

• 대한의생명과학회지
• /
• 제25권1호
• /
• pp.99-106
• /
• 2019

Amyloid positron emission tomography (PET) allows early and accurate diagnosis in suspected cases of Alzheimer's disease (AD) and contributes to future treatment plans. In the present study, a method of implementing a diagnostic system to distinguish ${\beta}$-Amyloid ($A{\beta}$) positive from $A{\beta}$ negative with objectiveness and accuracy was proposed using a machine learning approach, such as the Principal Component Analysis (PCA) and Support Vector Machine (SVM). $^{18}F$-Florbetaben (FBB) brain PET images were arranged in control and patients (total n = 176) with mild cognitive impairment and AD. An SVM was used to classify the slices of registered PET image using PET template, and a system was created to diagnose patients comprehensively from the output of the trained model. To compare the per-slice classification, the PCA-SVM model observing the whole brain (WB) region showed the highest performance (accuracy 92.38, specificity 92.87, sensitivity 92.87), followed by SVM with gray matter masking (GMM) (accuracy 92.22, specificity 92.13, sensitivity 92.28) for $A{\beta}$ positivity. To compare according to per-subject classification, the PCA-SVM with WB also showed the highest performance (accuracy 89.21, specificity 71.67, sensitivity 98.28), followed by PCA-SVM with GMM (accuracy 85.80, specificity 61.67, sensitivity 98.28) for $A{\beta}$ positivity. When comparing the area under curve (AUC), PCA-SVM with WB was the highest for per-slice classifiers (0.992), and the models except for SVM with WM were highest for the per-subject classifier (1.000). We can classify $^{18}F$-Florbetaben amyloid brain PET image for $A{\beta}$ positivity using PCA-SVM model, with no additional effects on GMM.

• 한국환경보건학회지
• /
• 제45권2호
• /
• pp.154-163
• /
• 2019

Objectives: The hazardous heavy metal contents of cosmetics were investigated and the resulting values were compared by type of cosmetics: skin care preparations (SCP), hair preparations (HP), makeup preparations (MP), and eye makeup preparations (EMP). Methods: The hazardous heavy metal contents (Pb, As, Cd, Sb, Ni and Hg) were analyzed for 358 cosmetics products (187 SCP, 82 HP, 56 MP, and 33 EMP). Hg was measured by the amalgamation method, and other hazardous heavy metals were measured by inductively coupled plasma optical emission spectrometer (ICP-OES) after decomposition using the microwave method. Results: The mean contents of Pb, As, Cd, Sb, Ni, and Hg in cosmetics were 0.424, 0.068, 0.024, 0.398, $0.567{\mu}/g$, and Not Detected, respectively. All of the hazardous heavy metals were detected in most products, but below the recommended maximums of the Ministry of Food and Drug Safety. The level of Cd was the lowest at 14.8%, and Sb was the highest at 41.2%. Pb, Sb and Ni showed the highest mean value and detection rate in EMP. As, Cd, and Hg showed the highest in SCP, HP, and MP, respectively. Conclusion: Hazardous heavy metals were detected in most products. In particular, Pb, Sb, and Ni were broadly detected in EMP, meaning more stringent quality control is required.

• 대한의용생체공학회:의공학회지
• /
• 제39권6호
• /
• pp.237-242
• /
• 2018

$^{18}F$-fludeoxyglucose PET (FDG-PET) can help finding an abnormal metabolic activity in brain. In this study, we evaluated an efficiency of volume- and cortical surface-based analysis which were used to determine whether standardized uptake value ratio (SUVR) of FDG-PET was different among Alzheimer's disease (AD), mild cognitive impairment (MCI), and healthy control (HC). Each PET image was rigidly co-registered to the corresponding magnetic resonance imaging (MRI) using mutual information. All voxels of the co-registered PET images were divided by the mean FDG uptake of the cerebellum cortex which was thresholded by partial volume effect (>0.9). Also, the SUVR value of each vertex was linearly interpolated from volumetric SUVR image which was thresholded by gray matter partial volume effect (>0.1). Lobar mean values were calculated from both volume- and cortical surface-based SUVRs. Statistical analysis was conducted to compare two measures for AD, MCI and HC groups. Even though the results of volume (SUVR_vol) and cortical surface-based SUVR (SUVR_surf) analysis were not significantly different from each other, the latter would be better for detecting group differences in SUVR of PET.