• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.46-49
• /
• 2011

This paper is to implement MoIP platform to send and receive video and audio at the same time by using high-performance Dual Core Processor. Even if Wall-Pad key component of a home network system is released by using embedded processors, it's lacking of performance in terms of multimedia processing and feature of video telephony through which video and voice are exchanged simultaneously. The main reason could be that embedded processors currently being used do not provide enough performance to support both MoIP call features and various home network features simultaneously. In order to solve these problems, Dual processor could be used, but in the other hands it brings another disadvantage of high cost. Therefore, this study is to solve the home automation features and video telephony features by using Dual Core Processor based on ARM 11 Processor and implement the MoIP Wall-Pad which can reduce the board design costs and component costs, and improve performance. The platform designed and implemented in this paper verified performance of MoIP to exchange the video and voice at the same time under the situation of Ethernet network.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.20-26
• /
• 2019

This study was conducted on cooling systems in which, for the first time at home and abroad, cold water panels are embedded in the walls of small buildings for radiant cooling by heat absorption with cold water. In summer, cold water is circulated through cold water (chiller) circulation tubes embedded in three walls (two side walls and one rear wall) of a building to implement radiant cooling by the coldness of the water. From the results of this study, the experimental and theoretical natural convection heat transfer coefficients were relatively well-matched over the entire experimental range, thereby verifying the reliability of the experimental results. The surface temperature reduction rate of the walls in which cold water panels are embedded was large whereas that of the walls where no cold water panels are embedded was very small.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 2003

In this paper, we report the numerical and experimental results in a half-cylinder. In the numerical computation, we used the zonal embedded grid system. Flow visualization for the spin-up flows was used by PIV. The results show that at left hand side an cyclonic cell moves along a wall and separates into both cells at right hand side.

• 지질공학
• /
• 제32권4호
• /
• pp.671-684
• /
• 2022

본 연구에서는 고강도 결합 매입말뚝 흙막이 공법의 안정성을 검증하고 그에 따른 현장 적용성을 확인하고자 하였다. 따라서 C.I.P 흙막이 공법과 고강도 결합 매입말뚝 흙막이 공법을 수치해석으로 비교·분석하였으며, 고강도 결합 매입말뚝 흙막이 공법이 적용된 현장의 계측 Data와 수치해석 결과를 비교·분석하여 지반거동 및 고강도 결합 매입말뚝 흙막이 공법의 안정성 및 현장 적용성을 검증하고자 하였다. 실험결과, 단면력의 경우 고강도 결합 매입말뚝 흙막이벽이 C.I.P 흙막이벽보다 변위는 최소 13.6%~최대 19.7%가 감소하였고, 전단력은 최소 0.7%~최대 4.7% 정도 증가하였다. 또한 휨모멘트의 경우 최소 4.5%~최대 8.8%정도 증가하는 경향을 보였다. 굴착주변 지반의 침하량을 검토한 결과, C.I.P 흙막이벽이 최대 46.89 mm, 고강도 결합 매입말뚝 흙막이벽이 39.37 mm로 산정되었으며, 고강도 결합 매입말뚝이 C.I.P 흙막이벽에 비해 최대 침하량이 약 17% 정도 작게 산정되었다. 현장지반을 대상으로 탄소성보법에 의해 산정된 최대 휨모멘트와 전단력을 적용하여 고강도 결합 매입말뚝 흙막이벽체를 설계한 결과, 모두 탄성영역 내에서 부재력이 발생되어 안전한 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제16권7호
• /
• pp.23-33
• /
• 2015

본 연구는 차수가 요구되는 현장에 Sheet Pile을 적용하려고 하나 풍화암 등의 지반조건으로 인해 항타관입성의 제한이 있을 때 H-Pile로 보강된 Sheet Pile 흙막이 벽체를 적용하기 위한 수치해석 연구이다. Sheet Pile을 H-Pile로 보강한 S/H 복합파일의 거동을 규명하기 위하여 Sheet Pile의 규격 2종류와 H-Pile 3종류의 부재조건 변화, Sheet Pile과 H-Pile의 설치 근입심도 변화, H-Pile의 설치간격, 굴착조건 등을 변화시킨 101개의 경우에 대해 광범위한 수치해석을 실시하였다. 수치해석 결과, Sheet Pile SP-IIIA와 H-Pile H250, Sheet Pile SP-IV와 H-Pile H350의 조합에서 두 부재가 동시에 허용응력에 도달하거나 같은 응력비를 갖는 것으로 나타나 이 기성제품 조합이 효율적임을 알 수 있었으며, S/H 복합파일의 강성이 증가할수록 벽체의 수평변위가 감소하였고 S/H 복합파일 중 Sheet Pile의 근입심도가 안정성에 미치는 영향은 작은 것으로 나타나 Sheet Pile은 지지층 내 관입이 가능한 위치까지만 설치하여도 차수 및 벽체강성 증가의 목적을 달성할 수 있을 것으로 분석되었다.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.11-16
• /
• 2006

A new method to fabricate metal electrodes on side wall of the microchannel is presented. Electrical signal can be measured by the metal electrodes on channel side wall when microparticles pass through a polymer microchannel. 3 dimensional metal electrodes on channel side wall could be fabricated by local deposition of metal through a shadowmask and inclined evaporation. The polymer microchannel with side wall electrodes could be precisely aligned onto metal contact patterns on pyrex glass. The impedance measurement test showed possibility of electrical signal measurement using the fabricated device.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.113-116
• /
• 2004

No specific guidelines are for computing the shear strength of steel coupling beam connections embedded in the reinforced concrete shear wall. In this paper, a theoretical study of the strength of hybrid coupled shear wall connections is achieved. The bearing stress at failure in the concrete below the steel coupling beam section is related to the concrete compressive strength and the ratio of the width of the steel coupling beam section to the thickness of the hybrid coupled shear wall. To revise factor affecting shear transfer strength across connections between coupled shear walls and steel coupling beam, experimental studies are achieved. The main test variables were auxiliary details of stud bolts. In this studies, these proposed equations are shown to be in good agreement with the test results reported in the paper and with other test data in the literature.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.1147-1170
• /
• 2015

In this paper, the behavior of underground strutted retaining structure under seismic condition in non-liquefiable dry cohesionless soil is analyzed numerically. The numerical model is validated against the published results obtained from a study on embedded cantilever retaining wall under seismic condition. The validated model is used to investigate the difference between the static and seismic response of the structure in terms of four design parameters, e.g., support member or strut force, wall moment, lateral wall deflection and ground surface displacement. It is found that among the different design parameters, the one which is mostly affected by the earthquake force is wall deflection and the least affected is the strut force. To get the best possible results under seismic condition, the embedment depth of the wall and thickness of the wall can be chosen as around 100% and 6% of the depth of final excavation level, respectively. The stiffness of the strut may also be chosen as $5{\times}105kN/m/m$ to achieve best possible performance under seismic condition.

• 한국건축시공학회지
• /
• 제6권2호
• /
• pp.81-89
• /
• 2006

A down construction method is frequently used in these days to reduce popular discontent and to assure sufficient working space at early stage in downtown area. There are two main problems in the existing down construction method. One is a confliction between frame works and excavation works, and the other is a cold joint in retaining wall which is unavoidable due to a sequence of concrete placement and induces a water leakage. Therefore, a new method is needed to overcome these problems. The CWS (buried wale Continuous Wall System) method was developed by authors. By replacing RC perimeter beam with embedded steel wale, the steel frame works of substructure can be simplified and the water leakage can be prevented using continuous retaining wall. Consequently, the improved qualify and reduction of construction period can be obtained from CWS method.