• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.11
• /
• pp.427-438
• /
• 2016

Car blackboxes record the information and status of driving. Since blackboxes are commonly used in daily life, the usage of video data recorded from blackboxes is increasing for investigating. Investigators use a own analysis tool suitable for their blackbox provided by the manufacturer in order to check the data. But the tools are not enough to use in the digital forensic analysis because they are dependent on a specific model of blackbox and provides ungeneralized functions. Moreover, if the manufacturer is bankrupt, then their own tools can not be obtained also. Therefore, the way data are stored in the blackboxes which are now in the market are investigated and the features and limitations which have blackbox's own analysis tools are checked. And a comprehensive tool for the analysis of blackboxes is designed and implemented as in this paper.

• Advances in nano research
• /
• v.2 no.1
• /
• pp.1-14
• /
• 2014

Dislocations are basic crystal defects and represent one-dimensional native nanostructures embedded in a perfect crystalline matrix. Their structure is predefined by crystal symmetry. Two-dimensional, self-organized arrays of such nanostructures are realized reproducibly using specific preparation conditions (semiconductor wafer direct bonding). This technique allows separating dislocations up to a few hundred nanometers which enables electrical measurements of only a few, or, in the ideal case, of an individual dislocation. Electrical properties of dislocations in silicon were measured using MOSFETs as test structures. It is shown that an increase of the drain current results for nMOSFETs which is caused by a high concentration of electrons on dislocations in p-type material. The number of electrons on a dislocation is estimated from device simulations. This leads to the conclusion that metallic-like conduction exists along dislocations in this material caused by a one-dimensional carrier confinement. On the other hand, measurements of pMOSFETs prepared in n-type silicon proved the dominant transport of holes along dislocations. The experimentally measured increase of the drain current, however, is here not only caused by an higher hole concentration on these defects but also by an increasing hole mobility along dislocations. All the data proved for the first time the ambipolar behavior of dislocations in silicon. Dislocations in p-type Si form efficient one-dimensional channels for electrons, while dislocations in n-type material cause one-dimensional channels for holes.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.63-74
• /
• 2020

AI products are used 'AI assistants' as embedded in smart phones, speakers, appliances as agents. Studies on anthropomorphism, such as personality, voice with a weak AI are being conducted. Role and function of AI agents will expand from development of AI technology. Various attributes related to the agent, such as user type, usage environment, appearance of the agent will need to be considered. This study intends to categorize interaction factors related to agents from the user's perspective through analysis of concept videos which agents with strong AI. Framework for analysis was built on the basis of theoretical considerations for agents. Concept videos were collected from YouTube. They are analyzed according to perspectives on environment, user, agent. It was categorized into 8 attributes: viewpoint, space, shape, agent behavior, interlocking device, agent interface, usage status, and user interface. It can be used as reference when developing, predicting agents to be commercialized in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.293-298
• /
• 2009

In this contribution, a 193-bit elliptic curve cryptography coprocessor was implemented on an FPGA board. Optimized algorithms and numerical expressions which had been verified through C program simulation, should be analyzed again with HDL (hardware description language) such as Verilog, so that the verified ones could be modified to be applied directly to hardware implementation. The reason is that the characteristics of C programming language design is intrinsically different from the hardware design structure. The hardware IP which was double-checked in view of hardware structure together with algoritunic verification, was implemented on the Altera CycloneII FPGA device equipped with ARM9 microprocessor core, to a real chip prototype, using Altera embedded system development tool kit. The implemented finite field calculation IPs can be used as library modules as Elliptic Curve Cryptography finite field operations which has more than 193 bit key length.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.846-854
• /
• 2017

In this paper, we proposed a method to reduce the error of compass by combining the ceiling technique used in the past with modern IT technology. We combined an encoder and the Azimuth Circle for applying an algorithm. The algorithm is able to calculate the true north by using astronomical observation. Finally, we implemented the embedded system possible to indicate various situations and perform calculations. As a result, it isn't only able to calculate the true north with an error of about $0.2^{\circ}$ but also takes less than 5 seconds. Originally, using astronomical observation requires more than 5minutes. So it is analyzed as convenient by solving the problem of taking lots of time. Especially, we present the tolerance less than $0.5^{\circ}$ by the analysis of the existing gyrocompass and the bearing standard of IMO. In conclusion, we clearly confirm that the results of this paper are possible to reduce the error of various compasses in a real world.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.517-525
• /
• 2005

iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard ethernet switch and router for this kind of access, it can not only be applied to ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, focusing on this applicability, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the iSCSI initiator driver, which was originally designed for wired networks. Additionally, its potential with a wireless network is also evaluated.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1423-1429
• /
• 2019

Recently, a system that supports efficient interaction, a human machine interface (HMI), has become a hot topic. In this paper, we propose a new real time low-cost hand gesture control system as one of vehicle interaction methods. In order to reduce computation time, depth information was acquired using a time-of-flight (TOF) camera because it requires a large amount of computation when detecting hand regions using an RGB camera. In addition, fourier descriptor were used to reduce the learning model. Since the Fourier descriptor uses only a small number of points in the whole image, it is possible to miniaturize the learning model. In order to evaluate the performance of the proposed technique, we compared the speeds of desktop and raspberry pi2. Experimental results show that performance difference between small embedded and desktop is not significant. In the gesture recognition experiment, the recognition rate of 95.16% is confirmed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.983-988
• /
• 2016

Internet of Things Iranian people and things, things and things are connected through the Cloud. It can significantly save energy through a combination of LED lighting as a new ICT technologies and industry-to provide a human-centric, eco-friendly, and the content is embedded multifunction solutions that meet your needs, environment, implementation time according to user requirements, technology It can be systematized as converged next-generation lighting. In this paper, we have developed regarding whether the building in relation to the LED lighting control system using smart devices and Cloud-based user as a human connection through the board to the Arduino Yun lit LED lighting, wireless smart device or to the Cloud or off. After the Arduino Yun is connected to the Internet, taking the current date and time information from the Linux shell command used the way coming across the bridge (BRIDGE) its value.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.209-218
• /
• 2017

Healthcare services can be provided through a number of independent service platforms for measurement of vital signs, diagnosis and prevention of diseases, and Information and communication technology(ICT) such as internet and mobile are converged to provide health information to users at anytime and anywhere, and it is in the center of the IoT(Internet of things). Accordingly, in this paper, we designed IoT based urination management system and evaluate the performance. A low - power Zigbee network was constructed for the configuration of the urination management system. The implemented capacitive diaper sensor was operable for the duration of 2,000 hours. We also built a database server using Raspberry Pi, a tiny embedded device, and stored the collected data to verify the data through an Android-based mobile application. The proposed urination management system can be utilized not only for the older patients, but also for the infants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.5
• /
• pp.401-407
• /
• 2017

This paper describes wavenumber filtering for damage detection using single-frequency standing wave excitation and laser scanning sensing. An embedded piezoelectric sensor generates ultrasonic standing waves, and the responses are measured using a laser Doppler vibrometer and mirror tilting device. After scanning, newly developed damage detection techniques based on wavenumber filtering are applied to the full standing wave field. To demonstrate the performance of the proposed techniques, several experiments were performed on composite plates with delamination and aluminum plates with corrosion damage. The results demonstrated that the developed techniques could be applied to various structures to localize the damage, with the potential to improve the damage detection capability at a high interrogation speed.