• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.90-95
• /
• 2005

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints with various shapes of cutouts. It is important to study these connected structures under dynamic forces for evaluation of stress concentration. In this paper, a FQI(fatigue quality index) analysis using the concept of SF(severity factor) is performed to various shape of elliptical hole. The SF is affected by the location of cutout in plate and radius ratio, static SF is analyzed with finite element analysis and the equation of FQI for predicting a dynamic SF is formed.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.811-831
• /
• 2015

This paper focuses on the strengthening methods used for improving the compression behaviors of perforated box-section walls as provided in the anchorage zones of steel pylons. Rectangular plates containing double-row continuous elliptical holes are investigated by employing the boundary condition of simple supporting on four edges in the out-of-plane direction of plate. Two types of strengthening stiffeners, named flat stiffener (FS) and longitudinal stiffener (LS), are considered. Uniaxial compression tests are first conducted for 18 specimens, of which 5 are unstrengthened plates and 13 are strengthened plates. The mechanical behaviors such as stress concentration, out-of-plane deformation, failure pattern, and elasto-plastic ultimate strength are experimentally investigated. Finite element (FE) models are also developed to predict the ultimate strengths of plates with various dimensions. The results of FE analysis are validated by test data. The influences of non-dimensional parameters including plate aspect ratio, hole spacing, hole width, stiffener slenderness ratio, as well as stiffener thickness on the ultimate strengths are illustrated on the basis of numerous parametric studies. Comparison of strengthening efficiency shows that the continuous longitudinal stiffener is the best strengthening method for such perforated plates. The simplified formulas used for estimating the compression strengths of strengthened plates are finally proposed.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1671-1677
• /
• 2001

Cracks at mechanical fastener holes usually nucleate as elliptical comer cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks. The weight function method for elliptical arc through cracks at mechanical fastener holes has been developed and verified in the part I of this study. In part H, applying the weight function method, the effects of the amount of clearance on the mixed-mode stress intensity (actors are investigated and the change of crack shape is predicted from the analysis for various crack shapes. The stress intensity factors leer inclined crack are analyzed and critical angle at which mode I stress intensity factor becomes maximum is determined.

• Steel and Composite Structures
• /
• 제34권2호
• /
• pp.227-239
• /
• 2020

The aim of this study is to obtain the nonlinear and post-buckling responses of relatively thick functionally graded plates with oblique elliptical cutouts using a new semi-analytical approach. To model the oblique elliptical hole in a FGM plate, six plate-elements are used and the connection between these elements is provided by the well-known Penalty method. Therefore, the semi-analytical technique used in this paper is known as the plate assembly technique. In order to take into account for functionality of the material in a perforated plate, the volume fraction of the material constituents follows a simple power law distribution. Since the FGM perforated plates are relatively thick in this research, the structural model is assumed to be the first order shear deformation theory and Von-Karman's assumptions are used to incorporate geometric nonlinearity. The equilibrium equations for FGM plates containing elliptical holes are obtained by the principle of minimum of total potential energy. The obtained nonlinear equilibrium equations are solved numerically using the quadratic extrapolation technique. Various sets of boundary conditions for FGM plates and different cutout sizes and orientations are assumed here and their effects on nonlinear response of plates under compressive loads are examined.

• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1211-1226
• /
• 2016

In this study, free vibration and damping characteristics of composite beams with holes are investigated, experimentally and numerically. Two types of samples with different fabrics are used: unidirectional and woven. The effects of diameter, number and location of circular holes on the vibration characteristics of composite beams are examined. The effects of rotation angle and minor to major diameter ratio of the elliptical hole are also investigated numerically. Moreover, the mode shapes of all types of beams are obtained numerically. According to the results, the natural frequency decreases with increasing hole diameter but increases very little with increasing the distance between the hole center and the clamped end. Damping ratio decreases by increasing the diameter of hole. But it fluctuates by increasing the diameters of holes of beam having three holes. Furthermore it decreases by increasing the distance between hole center and clamped end except for the range 50 mm to 100 mm.

• 천문학회보
• /
• 제40권2호
• /
• pp.51.2-51.2
• /
• 2015

Gravitational lensed quasar systems are usually explained by a source quasar lensed by a galaxy that can be approximated by an isothermal sphere. But most galaxies have a supermassive black hole (SMBH) at its center. We study the lensing by an isothermal sphere with a central SMBH. The additional lensing effects of a SMBH on the number, position, and magnification of lensed images are investigated. We apply the analysis to observed lens systems including Q0957+561. We also study the lensing by an elliptical mass distribution with a SMBH.

• 천문학회보
• /
• 제41권1호
• /
• pp.64.3-64.3
• /
• 2016

Gravitational lensed quasar systems are usually modelled by a source quasar lensed by an isothermal sphere galaxy. But most galaxies are elliptical and have a supermassive black hole (SMBH) at its center. We study lensing by an ellipsoid with a central SMBH to investigate the additional lensing effects of a SMBH on the number, position, and magnification of lensed images. We apply the analysis to the observed lens system Q0957+561, and explore the possibility of testing the existence of SMBH at the center of the lensing galaxy.

• 수산해양기술연구
• /
• 제19권1호
• /
• pp.51-56
• /
• 1983

경계요소법에 의하여 U자형 홈(groove)을 가진 평판이 측면 분포하중을 받을 때 끝부에 위치할 원형 Hole의 최적 위치의 해석을 행하고 동일한 모델(model)에 대하여 실험결과를 비교하여 다음과 같은 결론을 얻게 되었다. 1. 원형 Hole이 U자형 홈(groove)에 가까이 접근하게 됨에 따라 초기의 원형 Hole은 c.-c.선에 수직방향이 그 장축이 되는 타원형으로 변화됨을 알 수 있다. 2. 원형 Hole이 U-groove에 접근함에 따라 Hole 과 Groove 사이의 Neck부는 그 횡단면응력이 인장 및 압축이 동시에 존재하다가 점점 전체가 인장역이 됨을 알 수 있다. 3. 원형 Hole이 Groove에 접근함에 따라 판재경계와 Hole 사이의 목(neck)부분은 계속적인 압축상태를 유지한다. 4. U-groove쪽의 Neck area의 응력분포는 그 최대응력치가 Hole로 접근함에 따라 가속적으로 증가하고 Hole의 찌그러짐(distortion)의 방지를 위한 Hole의 최적중심의 위치는 Neck부의 Hole 측면의 압축응력치가 0이 되지 않는 범위가 한계임을 알 수 있다.

• Structural Engineering and Mechanics
• /
• 제63권3호
• /
• pp.269-280
• /
• 2017

One major concern that has occupied the mind of the designers is a structural failure as result of stress concentration in the geometrical discontinuities. Understanding the effective parameters contribute to stress concentration and proper selection of these parameters enables the designer get to a reliable design. In the analysis of perforated isotropic and orthotropic plates, the effective parameters on stress distribution around holes include load angle, curvature radius of the corner of the hole, hole orientation and fiber angle for orthotropic materials. This present paper tries to examine the possible effects of these parameters on stress analysis of infinite perforated plates with central quasi-square hole applying grey wolf optimizer (GWO) inspired by the particular leadership hierarchy and hunting behavior of grey wolves in nature, and also the present study tries to introduce general optimum parameters in order to achieve the minimum amount of stress concentration around this type of hole on isotropic and orthotropic plates. The advantages of grey wolf optimizer are stout, flexible, simple, and easy to be enforced. The used analytical solution is the expansion of Lekhnitskii's solution method. Lekhnitskii applied this method for the stress analysis of anisotropic plates containing circular and elliptical holes. Finite element numerical solution is employed to examine the results of present analytical solution. Results represent that by selecting the aforementioned parameters properly, fewer amounts of stress could be achieved around the hole leading to an increase in load-bearing capacity of the structure.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.177-182
• /
• 1997

The purpose of this study is to analyze how tools, guide bush type and the change of cutting speed have effects on the diameter of cutting hole, surface roughness of workpiece and roundness during the deep hole machining of SM55C with solid BTA drill by using BTA drilling system through experiment. Conclusion reached is as follows. (1) The diameter was expanded for 25${\mu}{\textrm}{m}$ at the first section and then was reduced 0${\mu}{\textrm}{m}$ and 15${\mu}{\textrm}{m}$ respectively at the 10m and 20m section comparing to the diameter of tool with respect to the variation of cutting length. (2) It was proved that roughness was below 12S for the whole section of cutting length. (3) The roundness has been below 12${\mu}{\textrm}{m}$. Regarding the polygon phenomenon, it has bee proved that not only uneven number of angle but also even number (quadrilateral, elliptical) of angle were made. (4) Variation of diameter, surface roughness of workpiece and roundness turned out to ve the best at 70m/min of cutting speed, 0.15mm/rev of feed.