1 |
Asmar, G.H. and Jabbour, T.G. (2007), "Stress analysis of anisotropic plates containing rectangular holes", Int. J. Mech. Sol., 2, 48-59.
|
2 |
Banerjee, M., Jain, N.K. and Sanyal, S. (2013), "Stress concentration in isotropic and orthotropic composite plates with center circular hole subjected to transverse static loading", Int. J. Mech. Ind. Eng., 3, 109-113.
|
3 |
Batista, M. (2011), "On the stress concentration around a hole in an infinite plate subject to a uniform load at infinity", Int. J. Mech. Sci., 53, 254-261.
DOI
|
4 |
Derrac, J., Garci, A.S., Molina, D. and Herrera, F. (2011), "A practical tutorial on the use of nonparametric statistical tests as a methodology for comparing evolutionary and swarm intelligence algorithms", Swarm Evolut Comput., 1, 3-18.
DOI
|
5 |
Emary, E., Zawbaa, H.M., Grosan, C. and Hassenian, A.E. (2015), "Feature subset selection approach by gray wolf optimizer", Adv. Intell. System. Comput., 334, 1-13.
|
6 |
Holland, J.H. (1992), Adaptation in Natural and Artificial Systems, MIT Press, Cambridge.
|
7 |
Jafari, M. and Rohani, A. (2016), "Optimization of perforated composite plates under tensile stress using genetic algorithm", J Compos Mater., 50, 2773-2781.
DOI
|
8 |
Jafari, M., Hoseynia, S.A. and Bayati, M.H. (2016), "Determination of optimal parameters for perforated plates with quasi-triangular cutout by PSO", Struct. Eng. Mech., 60(5), 795-807.
DOI
|
9 |
Jong, T.D. (1981), "Stresses around rectangular holes in orthotropic plates", J. Compos. Mater., 15, 311-328.
DOI
|
10 |
Kennedy, J. and Eberhart, R. (1995), "Particle swarm optimization", Proc. ICNN'95 - Int. Conf. Neural Networks, 4, 1942-8, doi: 10.1109/ICNN.1995.488968.
DOI
|
11 |
Lekhnitskii, S.G. (1968), Anisotropic Plates, Gordon and Breach Science, New York.
|
12 |
Louhghalam, A., Igusa, T., Park, C., Choi, S. and Kim, K. (2011), "Analysis of stress concentrations in plates with rectangular openings by a combined conformal mapping-finite element approach", Int. J. Solid. Struct., 48, 1991-2004.
DOI
|
13 |
Mirjalili, S. (2015), "How effective is the Grey Wolf Optimizer in training multi-layer perceptrons", Appl. Intell., 43, 150-161.
DOI
|
14 |
Mirjalili, S., Mirjalili, S.M. and Lewis, A. (2014), "Grey Wolf Optimizer", Adv. Eng. Softw., 69, 46-61.
DOI
|
15 |
Muskhelishvili, N.I. (1954), Some Basic Problems of the Mathematical Theory of Elasticity, Springer Netherlands, Dordrecht.
|
16 |
Rezaeepazhand, J. and Jafari, M. (2005), "Stress analysis of perforated composite plates", Compos. Struct., 71, 463-468.
DOI
|
17 |
Myung, J., Jhung, H.J. and Kyeong, H.J. (2016), "Modal characteristics of partially Perforated rectangular Plate with triangular penetration pattern", Struct. Eng. Mech., 55(3), 583-603.
DOI
|
18 |
Nageswara Rao, D.K., Ramesh Babu, M., Raja Narender Reddy, K. and Sunil, D. (2010), "Stress around square and rectangular cutouts in symmetric laminates", Compos. Struct., 92, 2845-2859.
DOI
|
19 |
Ratnaweera, A., Halgamuge, S.K. and Watson, H.C. (2004), "Selforganizing hierarchical particle swarm optimizer with timevarying acceleration coefficients", IEEE Tran. Evol. Comput., 8, 240-55.
DOI
|
20 |
Rezaeepazhand, J. and Jafari, M. (2010), "Stress concentration in metallic plates with special shaped cutout", Int. J. Mech. Sci., 52, 96-102.
DOI
|
21 |
Savin, G.N. (1970), Stress Distribution Around Holes, NASA Technical Translation, Pergamon Press, New York.
|
22 |
Romeo, G. (2001), "Analytical behavior of laminates with rectangular opening under biaxial tension, compression and shear loads", J. Compos. Mater., 35, 639-664.
DOI
|
23 |
Sancho, J. and Miravete, A. (2006), "Design of composite structures including delamination studies", Compos. Struct., 76, 283-290.
DOI
|
24 |
Saremi, S., Mirjalili, S.Z. and Mirjalili, S.M. (2015), "Evolutionary population dynamics and grey wolf optimizer", Neural Comput. Appl., 26, 1257-1263.
DOI
|
25 |
Sburlati, R. (2013), "Stress concentration factor due to a functionally graded ring around a hole in an isotropic plate", Int. J. Solid. Struct., 50, 3649-3658.
DOI
|
26 |
Sivanandam, S.N. and Deepa, S.N. (2008), Introduction to Genetic Algorithms, Springer Berlin Heidelberg, New York.
|
27 |
Song, H.M., Sulaiman, M.H. and Mohamed, M.R. (2014), "Anapplication of grey wolf optimizer for solving combined economic emission dispatch problems", Int. Rev. Model. Simula., 2, 838-844.
|
28 |
Song, X., Tang, L., Zhao, S., Zhang, X., Li, L., Huang, J. and Cai, W. (2015), "Grey wolf optimizer for parameter estimation in surface waves", Soil Dyn. Earthq. Eng., 75, 147-157.
DOI
|
29 |
Ukadgaonker, V.G. and Kakhandki, V. (2005), "Stress analysis for an orthotropic plate with an irregular shaped hole for different in-plane loading conditions", Compos. Struct., 70, 255-274.
DOI
|
30 |
Timoshenko, S.P. and Goodier, J.N. (1986), Theory of Elasticity, McGraw-Hill, Book Company, New York.
|
31 |
Ukadgaonker, V.G. and Rao, D.K.N. (1999), "Stress distribution around triangular holes in anisotropic plates", Compos. Struct., 45, 171-183.
DOI
|
32 |
Vigdergauz, S. (2001), "The effective properties of a perforated elastic plate Numerical optimization by genetic algorithm", Int. J. Solid. Struct., 38, 8593-8616.
DOI
|
33 |
Yang, X., Yuan, J., Yuan, J. and Mao, H. (2007), "A modified particle swarm optimizer with dynamic adaptation", Appl. Math. Comput., 189, 1205-13.
DOI
|
34 |
Ukadgaonker, V.G. and Rao, D.K.N. (2000), "A general solution for moments around holes in symmetric laminates", Compos. Struct., 49, 41-54.
DOI
|