• The Korea Journal of Herbology
• /
• v.34 no.6
• /
• pp.25-32
• /
• 2019

Objectives : Ephedra regeliana, although similar to the other E. sinica, E. intermedia, and E. equisetina, is not authorized by The Korean Pharmacopoeia and yet has also been imported under the name of 'Ma-Hwang'. The aim of this study was to perform a comparative anatomical evaluation of Ephedrae Sinicae Herba (ESH), Ephedrae Intermedicae Herba (EIH), Ephedrae Equisetinae Herba (EEH) and Ephedrae Regelianae Herba (ERH). Methods : Permanent paraffin-embedded specimens were produced using the paraffin-tertiary butyl alcohol (TBA) method, to visualize their anatomical features via light microscopy. Results : ESH and ERH transverse sections were in the shape of a long ellipse, while those of EIH and EEH were in the shape of a circle. These anatomical characteristics substantiated the results of external morphological examination. The sections revealed that each of the four samples showed significantly different cortexes. The cortex of ESH was wider than two thirds of the section, unlike that of the other samples which was relatively narrow. The xylems of ERH, EIH, and EEH demonstrated interconnectivity with other adjacent xylems, contrary to those in ESH. Therefore, the characteristic development of the xylems over time was used to distinguish ERH from the other. Furthermore, parenchymal morphology in the central cylinder was also a good criterion to differentiate between EIH and EEH, since EIH demonstrated parenchymal cells that were shaped like a rounded-triangle, whereas EEH parenchymal cells were chrysanthemum-shaped. Conclusions : The identification-keys established in this study would facilitate the accurate identification of microscopic features of the four varieties of 'Ma-Hwang'.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.699-706
• /
• 2022

In this study, Directed energy deposition (DED) among additive manufacturing is applied to repair damaged spindle key parts of planner miller. The material of the spindle key is SCM415, and the P21 Powder is used. In order to find the optimal deposition conditions for DED equipment, a single-line deposition experiment is conducted to analysis five parameters. The laser power affects the width, and the height is a parameter affected by coaxial gas and powder gas. In addition, laser power, powder feed rate, coaxial gas, and powder gas are parameters that affect dilution. Otimal deposition is that 400 W of laser power, 4.0 g/min of powder feed rate, 6.5 L/min of coaxial gas, 3.0 L/min of powder gas and 4.5 L/min of shield gas. By setting the optimum conditions, a uniform deposition cross section in the form of an ellipse can be obtained. Damage recovery process of spindle key consists of 3D shape design of the base and deposition parts, deposition path creation and deposition process, and post-processing. The hardness of deposited area with P21 powder on the SCM415 spindle key is 336 HV for the surface of the deposition, 260 HV for the boundary area, and 165 HV for the base material.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.1976-1995
• /
• 2023

The anchor-free object detector CenterNet regards the object as a center point and predicts it based on the Gaussian circle region. For each object's center point, CenterNet directly regresses the width and height of the objects and finally gets the boundary range of the objects. However, the critical range of the object's center point can not be accurately limited by using the Gaussian circle region to constrain the prediction region, resulting in many low-quality centers' predicted values. In addition, because of the large difference between the width and height of different objects, directly regressing the width and height will make the model difficult to converge and lose the intrinsic relationship between them, thereby reducing the stability and consistency of accuracy. For these problems, we proposed a center point prediction method based on the Gaussian elliptic region and a size component regression method based on the small solution space. First, we constructed a Gaussian ellipse region that can accurately predict the object's center point. Second, we recode the width and height of the objects, which significantly reduces the regression solution space and improves the convergence speed of the model. Finally, we jointly decode the predicted components, enhancing the internal relationship between the size components and improving the accuracy consistency. Experiments show that when using CenterNet as the improved baseline and Hourglass-104 as the backbone, on the MS COCO dataset, our improved model achieved 44.7%, which is 2.6% higher than the baseline.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.159-167
• /
• 2009

The vehicles play a significant role in modern people's life as economy grows. The development of car navigation system(CNS) provides various convenience because it shows the driver where they are and how to get to the destination from the point of source. However, the existing map-based CNS does not consider any environments such as traffic congestion. Given the same starting point and destination, the system always provides the same route and the required time. This paper proposes a path planning method with traffic prediction by applying historical driving information to the Fuzzy theory and Bayesian update. Fuzzy theory classifies the historical driving information into groups of leaving time and speed rate, and the traffic condition of each time zone is calculated by Bayesian update. An ellipse area including starting and destination points is restricted in order to reduce the calculation time. The accuracy and practicality of the proposed scheme are verified by several experiments and comparisons with real navigation.

• Communications of Mathematical Education
• /
• v.36 no.1
• /
• pp.23-38
• /
• 2022

The study provided a perspective on which readers can see Newton's proof heuristically in order to overcome the difficulty of proof showing 'QT²/QR converges to the latus rectum of ellipse' in the proof of the inverse square law of Newton's Principia. The heuristic perspective is as follows: The starting point of the proof is the belief that if we transform the denominators and numerators of QT²/QR into expression with respect to segments related to diameter and conjugate diameter, we may obtain some constant, the desired value, by their relationship PV × VG/QV² = PC²/CD² in Apollonius' Conic sections. The heuristic perspective proposed in this study is meaningful because it can help readers understand Newton's proof more easily by presenting the direction of transformation of QT²/QR.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.145-155
• /
• 2023

Objectives: A fit test panel is needed to identify the fit performance of a respirator and its face seal. This is a criterion for selecting subjects that can represent the facial characteristics of users. Although anthropometry data has been developed for people in United States and China it is not yet present in Korea. This study aimed to develop a Korean fit test panel and test headform. Methods: For the 7th and 8th waves of the Size Korea anthropometry data, facial measurements of 11,429 people aged 15 to 69 years were used for analysis. PCA and bivariate panel were classified using the ISO16976-2:2022(E) anthropometrics analysis method. Based on this result, a static headform was developemed and a fit test chamber was constructed. Results: Of the 11,429 Korean people used for principal component analysis, 11,300 were included in the ellipse, marking an acceptance rate of 98.87% on PCA panel. The face types were classified into five types. Among them, a large, medium, and small static headform were printed using a 3D printer. In addition, 10,985 people (96.12%) were included in the bivariate panel based on face length and face width. The y-axis (face length) boundary was 97.87 to 134.59 mm, and the x-axis (face width) boundary was 120.75 to 158.23 mm. Conclusions: Compared to the ISO analysis, the Korean principal component was narrower in the width item (PC1) and longer in the length item (PC2). For the future, it is necessary to conduct a fit test using the developed headform and chamber device to confirm the usefulness of this Korean test panel. Therefore, this study is considered valuable as basic research for Korean test panels.

• The Korean Journal of Zoology
• /
• v.15 no.3
• /
• pp.133-147
• /
• 1972

Ultrastructures of spermiogeneis in other invertebrates were investigated by several workes (Anderson, et al., 1967; Bloch, et al., 1964; Christen, 1961; Gatenby, et al., 1959; Paik, et al., 1968; Silveira, 1964; Yasuzumi, 1957) but spermiogenesis of dragonfly has not been reported previously. Testes and vass deferentia of the Korean dragonfly, Crocothemis servilia, were used for electron microscopic study of spermiogenesis. Materials were prefixed for 1-2 hours at $3^{\circ}C$ in 1.25% glutaraldehyde buffered to pH 7.2 with 0.2M sodium cacodylate buffer. Fixed tissue was washed twice in 0.2M cacodylate buffer and was subsequently postfixed for 2 hours at $3^{\circ}C$ in 1% osmium tetroxide buffered to pH 7.2 with 0.4M sodium cacodylate buffer solution. Specimens were dehydrated in graded ethyl alcohol, and finally embedded in epoxy Epon resin. Thin sections prepared from all the blocks were doubly stained; first in uranyl acetate and then in lead citrate. All thin sectios were examined with a Hitachi HS-7S electron microscope. The results of this study were summarized as follows. 1. Along the condensation of chromatin in nucleus, the shpae of nucleus was changed from spherical shpae to ellipse and cone cell type. 2. During the elongation of nucleus and the migration of cytoplasm, the nucleus removed to the one side of spermatid and began to invaginate from the posterior portion of nucleus. 3. There are ring centrioles in invaginated portion and axial filaments derived from centriole extend to the tail through the tailward half of spermatid. 4. In the cross sections the axial filament consisted of a central sheath, a central fibril, and 9 peripheral doublets.

• Geomechanics and Engineering
• /
• v.31 no.3
• /
• pp.249-263
• /
• 2022

The specially-shaped Polycrystalline Diamond Compact (PDC) cutter is widely used in drill bit design due to its advantages of high rock cutting efficiency, strong impact resistance and long service life in hard and abrasive formation drilling. A detailed understanding of rock cutting behavior of worn specially-shaped PDC cutter is essential to improve the drilling efficiency and decrease the drilling costs. In this paper, the theoretical models of two new principles (loading performance (LP) and cutting performance (CP)) are derived for evaluating the cutting process of worn specially-shaped cutter, the theoretical models consider the factors, such as cutter geometry, aggressiveness, stress state, working life, and rock cutting efficiency. Besides, the numerical model of heterogeneous granite is developed using finite element method combined with Voronoi tessellation, the LP and CP of 12 kinds of worn specially-shaped PDC (SPDC) cutters are analyzed. The results found that the mechanical specific energy (MSE) of worn cutters first increase and then decrease with increasing the cutting depth, and the MSE increase with the increase of back rake angle except for Conical cutter and Wedge-shaped cutter. From the perspective of CP, the worn PDC cutters are more suitable for the smaller cutting depths, and the back rake angle has little effect on the CP of the specially-shaped worn PDC cutters. Conical cutter, Saddle-shaped cutter and Ellipse-shaped cutter have the highest CP value, while Rhombus-shaped cutter, Convex cutter and Wedge-shaped cutter have the lowest value in selecting cutters. This research leads to an enhanced understanding of rock-breaking mechanisms of worn SPDC cutters, and provides the basis to select of specially-shaped PDC cutters for the specific target formation.

• The Journal of Korean Physical Therapy
• /
• v.35 no.5
• /
• pp.156-161
• /
• 2023

Purpose: This study examined the effects of subjective visual vertical perception and head orientation on static balance control. Methods: The subjects were 25 young and healthy adults. The vertical perception was measured using a subjective visual vertical (SVV), and the Center of pressure (COP) parameter was analyzed by continuously measuring the movement of the COP to determine the changes in static postural control. The group was divided based on a deviation of 3° in SVV (11 of SVV≥3°, 14 of SVV<3°) and measured with different head orientations: front, up, down, left, and right in the upright and tandem positions, respectively. Results: In the upright position, the SVV≥3° group had significantly larger values for all COP parameters (Sway length, Surface, Delta X, Delta Y, and Average speed) compared to the SVV<3° group (p<0.05). In the tandem stance, only the Ellipse Surface value was significantly larger among the COP parameters in the group with SVV≥3° compared to the group with SVV<3°(p<0.05). In contrast, the other COP parameters were not significantly different (p>0.05). The effects of static balance control on the head orientation were not statistically significant (p>0.05), and the interactions between the subjective vertical perception and head orientation were not significant (p>0.05). Conclusion: These results suggest that pathological deviations in SVV are associated with impaired static balance performance. This study can provide a therapeutic rationale for using visuospatial cognitive feedback training to improve the static balance.

• Korean Journal of Radiology
• /
• v.1 no.2
• /
• pp.110-113
• /
• 2000

Objective: The purpose of this study was to determine, when measuring prostate volume by TRUS, whether height is more accurately determined by transaxial or midsagittal scanning. Materials and Methods: Sixteen patients who between March 1995 and March 1998 underwent both preoperative TRUS and radical prostatectomy for prostate cancer were included in this study. Using prolate ellipse volume calculation (height × length × width × 𝜋/6), TRUS prostate volume was determined, and was compared with the measured volume of the specimen. Results: Prostate volume measured by TRUS, regardless of whether height was determined transaxially or midsagittally, correlated closely with real specimen volume. When height was measured in one of these planes, a paired t test revealed no significant difference between TRUS prostate volume and real specimen volume (p = .411 and p = .740, respectively), nor were there significant differences between the findings of transaxial and midsagittal scanning (p = .570). A paired sample test, however, indicated that TRUS prostate volumes determined transaxially showed a higher correlation coefficient (0.833) and a lower standard deviation (9.04) than those determined midsagittally (0.714 and 11.48, respectively). Conclusion: Prostate volume measured by TRUS closely correlates with real prostate volume. Furthermore, we suggest that when measuring prostate volume in this way, height is more accurately determined by transaxial than by midsagittal scanning.