• 분석과학
• /
• 제18권3호
• /
• pp.241-249
• /
• 2005

기기 중성자방사화분석법을 이용하여 대전시 도로변 대기분진(PM2.5)을 대상으로 As, Mn, Se, V, Zn 등의 독성금속을 포함하여 약 30여종의 미량성분을 분석하였다. 도로변 PM 2.5내 미량성분들의 농도는 자연적 발생원에 기인한 원소가 높게 나타났으며, 특히 K과 Fe이 671과 $653ng/m^3$으로 높은 농도를 보였다. 반면, Lu과 Dy는 0.01과 $0.04ng/m^3$으로 가장 낮은 농도를 보여 최대농도와 최소농도 간에는 $10^5$ 이상으로 차이가 벌어져 있음을 알 수 있었다. PM2.5와 미량성분간의 상관분석 결과, 도로변 지역에서 발생되는 PM2.5는 토양기원의 미량성분과 더 큰 상관을 보였다. 인자분석결과, 연구대상지역의 오염원은 재비산된 토양입자, 화석연료의 연소, 자동차 배기가스, 삼원촉매장치, 해염입자, 재련공장 등으로 확인되었다. 그리고 부화계수분석의 결과는 인자분석으로부터 발견된 사실과 부합함을 알 수 있었다.

• 대한화학회지
• /
• 제30권1호
• /
• pp.126-134
• /
• 1986

Aniline과 n-alkyl alcohol類로 부터 6-alkylbenzofuroxan을 얻고 이것과 4-aminophenol을 反應시켜 butyl, hexyl, octyl기를 가진 7-Alkyl-2-aminophenazine-5,10-dioxide를 合成하였다. 그리고 benzofuroxane과 4-aminophenol을 反應시켜 2-aminophenazine-5,10-dioxide도 合成하였다. 生成物들은 IR, NMR, 元素分析등으로 확인하였다. 이들 phenazine 誘導體의 수용액에 대한 表面張力을 測定하였는데 alkyl기의 탄소수가 증가할수록 表面張力이 底下됨을 알았다. 또한 抗菌性을 稀釋法에 의하여 調査하였는데 alkyl기의 탄소수가 4개인 butyl 誘導體의 경우가 가장 抗菌性이 강했으며, alkyl기가 없는 2-aminophenazine-5,10-dioxide보다는 alkyl기가 置換된 2-aminophenazine-5,10-dioxide의 抗菌性이 더 강하다는 것을 알았다.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.142-150
• /
• 2009

In this paper, non-treated ACF (Activated Carbon Fiber) /$TiO_2$ and Zn-treated ACF/$TiO_2$ were prepared. The prepared composites were characterized in terms of their structural crystallinity, elemental identification and photocatalytic activity. XRD patterns of the composites showed that the non-treated ACF/$TiO_2$ composite contained only typical single and clear anatase forms while the Zn-treated ACF/$TiO_2$ contained a mixed anatase and rutile phase with a unique ZnO peak. SEM results show that the titanium complex particles are uniformly distributed on and around the fiber and that the titanium complex particles are more regularly distributed on and around the ACF surfaces upon an increase of the $ZnCl_2$ concentration. These EDX spectra show the presence of peaks from the C, O and Ti elements. Moreover, peaks of the Zn element were observed in the Zn-treated ACF/$TiO_2$ composites. The prominent photocatalytic activity of the Zn-treated ACF/$TiO_2$ can be attributed to the three different effects of photo-degradation: doping, absorptivity by an electron transfer, and adsorptivity of porous ACFs between the Zn-$TiO_2$ and Zn-ACF.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.131-140
• /
• 2005

To investigate secondary carbonaceous species within PM$_{10}$ and PM$_{2.5}$ in Seoul urban Metropolitan Area (SMA), Korea. atmospheric particulate matters samples were collected at two sites of SMA at UOS (The University Of Seoul station) sites and IHU (InHa University of Incheon station) during the period of 4 to 14 January and 12 to 22 May, 11 to 15 August 2004, and their characteristics were qualitatively discussed. during January and May and August of 2004. Daily average mass concentration 0.095 mg/㎥ in PM$_{10}$ and 0.053 mg/㎥ in PM$_{2.5}$ for mass respectively. were observed in SMA. The concentrations of carbonaceous species contributed 18.4% and 16.4% of PM$_{2.5}$ and PM$_{10}$ during the sampling period, respectively, of which OC accounted for 68% and 52% more of the total carbon (TC). OC and EC concentrations and their mass percentages were higher in PM$_{2.5}$ than in PM$_{10}$ which could be attributed to generation process. Organic aerosols would constitute up to 38% of PM$_{2.5}$ based on the evaluation of 1.6 for the ratio of OC to organic particulate. Secondary organic carbon (SOC) were estimated to be more than 13% and up to 68% of total OC based on the minimum OC/EC ratio of 1.06/1.11 using least square method. Comparisons of OC and EC with trace elements. As results of carbonaceous species analysis, the dominant factor in view of fine particle (PM$_{10}$/PM$_{2.5}$) is primary emission source such as mobile, fossil fuel combustion etc. during winter time in SMA. But in summer periods, remarkable fine particle increasing factor was secondary organic carbon dependent to photochemical reaction. reaction.n. reaction.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.125-131
• /
• 1995

Ultra thin films of Tetra-3-hexadecylsulphamoylcopperphthalocyanine(HDSM-CuPc) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT-IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of Ultrathin Langmuir-Blodgett(LB) films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscopies. A quartz piezoelectric crystal coated with LB films of HDSM-CuPc was examined as a gas sensor for $N0_2$ gas. HDSM-CuPc LB films were transferred to a quartz crystal microbalance(QCM) in the form of Z-type multilayers. Response characteristics of film-coated QCM to $NO_2$ gas concentrations over a range of $100{\sim}600ppm$ have been tested with a thickness of $5{\sim}20$ layers of HDSM-CuPc. Changes in frequency by adsorption of $NO_2$ were increased With the number of LB layers and $NO_2$ concentration, but the response time was slow.

• 청정기술
• /
• 제20권4호
• /
• pp.367-374
• /
• 2014

0.1~1 M의 철킬레이트 화합물을 이용한 화학흡수반응에 의한 바이오가스내 황화수소제거를 위한 실험이 수행되었다. 철킬레이트 화합물을 이용한 황화수소제거는 철킬레이트의 최적산화반응을 통해 이루어진다. 바이오가스에 존재하는 황화수소는 킬레이트농도 및 pH 등의 공정조건에 따라 효과적으로 제거될 뿐만 아니라 철킬레이트 산화반응에 의해 황화수소내 존재하는 황성분을 생성시킨다. Fe-EDTA의 농도가 증가하면 철킬레이트 화합물의 착물이 안정되어 황생성의 전환이 증가하였다. 또한 철킬레이트화합물의 안정도는 pH에 따라 변하는 중요한 인자이고 pH 9에서 최적반응을 나타냈다.

• 한국지반환경공학회 논문집
• /
• 제11권6호
• /
• pp.77-83
• /
• 2010

본 연구에서는 화력발전소에서 발생한 바텀애쉬를 성토재로 사용하기 전 환경에 미치는 영향을 평가하고자 하였다. 바텀애쉬에 대한 기본 물성치는 공업분석, 원소분석, XRD, XRF를 통해 구하였고, 폐기물 용출실험, 토양오염 공정실험을 통해 바텀애쉬에 대한 폐기물 분류 및 토양오염 가능성을 평가하였다. 위 용출실험 결과는 국내 수질환경기준 및 지하수 수질기준과 비교하였고 수질오염의 가능성은 없는 것으로 평가되었다. 측정된 대부분의 중금속은 검출한도 이하였으며 $Cr^{6+}$의 경우 미량이 검출되었으나 기준치 이하였다. 컬럼실험에서는 Pb, Zn 및 황산염이 기준치를 초과하였으나, Pb과 Zn은 1 PVE 전에 모두 기준치 이하로 감소하였고 황산염은 기준치 이하로 감소하는데 최대 8 PVE의 시간이 소요되었다. 중금속의 경우 대부분이 기준치 이하이므로 문제가 없으나 황산염은 기준치를 10배 정도 초과하므로 사용에 주의를 요한다.

• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.232-239
• /
• 2013

Thin light-active layers of the $CuInSe_2$ solar cell were prepared on Mo-coated sodalime glass substrates by one-step electrodeposition and post-annealing. The structure, morphology, and composition of $CuInSe_2$ film could be controlled by deposition parameters, such as the composition of metallic precursors, the concentration of complexing agents, and the temperature of post-annealing with elemental selenium. A dense and uniform Cu-poor $CuInSe_2$ film was successfully obtained in a range of parametric variation of electrodeposition with a constant voltage of -0.5 V vs. a Ag/AgCl reference electrode. The post-annealing of the film at high temperature above $500^{\circ}C$ induced crystallization of $CuInSe_2$ with well-developed grains. The KCN-treatment of the annealed $CuInSe_2$ films further induced Cu-poor $CuInSe_2$ films without secondary phases, such as $Cu_2Se$. The structure, morphology, and composition of $CuInSe_2$ films were compared with respect to the conditions of electrodeposition and post-annealing using SEM, XRD, Raman, AES and EDS analysis. And the conditions for preparing device-quality $CuInSe_2$ films by electrodeposition were proposed.

• 한국전기전자재료학회논문지
• /
• 제31권1호
• /
• pp.6-10
• /
• 2018

Ni germanide (NiGe) is a promising alloy material with small contact resistance at the source/drain (S/D) of Ge MOSFETs. However, it is necessary to reduce the specific contact resistance between NiGe and the doped Ge S/D region in high-performance MOSFETs. In this study, a novel method is proposed to reduce the specific contact resistance between NiGe and p-type Ge (p-Ge) using a Tb interlayer. The specific contact resistance between NiGe and p-Ge was successfully decreased with the introduction of the Tb interlayer. To investigate the mechanism behind the reduction in the specific contact resistance, the elemental distribution and crystalline structure of NiGe were analyzed using secondary ion mass spectroscopy and X-ray diffraction. It is likely that the reduction in specific contact resistance was caused by an increase in the concentration of boron in the space between NiGe and p-Ge due to the influence of the Tb interlayer.

• 한국응용과학기술학회지
• /
• 제8권2호
• /
• pp.115-122
• /
• 1991

Four novel amphoteric surfactants of N-(2-alkylamidoethyl)-N, N-dimethyl ammonioacetates were synthesized. The each reaction between four saturated fatty acids containing 10, 12, 14 and 16 carbon atoms and N, N-dimethylethylene diamine permitted to give the intermediate products, N-(2-alkylamidoethyl)-N, N-dimethylamines. Quaterinzation of these intermediates was permitted to form N-(2-alkylamidoethyl)-N, N-dimethyl, ammonioacetates, whose sturctures were identified by CC, TLC, elemental analysis, IR pectrophotometry and $^1$HNMR spectrometry. The products yielded from 48% to 58%. The isoelectric points were shown in the range of $4.30{\sim}6.64$. It showed a tendency to learn to the acidic site and its range was broadened as increase of the hydrophobic group length. Surface tensions of the aqueous solution in the $10^{-6}{\sim}10^{-1}$mol/l of amidobetaines were measured. and the critical micell concentration(cmc) were shown in the range of $8.37{\times}10^{-6}{\sim}8.96{\times}10^{-2}$mol/l, and ${\Gamma}_{cmc}$ were reduced to 32.3~38.2 dyne/cm. A linear relationship between log cmc and the number of carbon in the hydrophobic alkyl chain was presented by the formula of log cmc=2.38-0.5n, and the contribution-rate of n on the standard free energy change in micellization ${\partial}({\Delta}G^0$$_m)/{\partial}n$, was calulated as -0.5RT.